National Institute of Technology Srinagar

About Dept.

Skip Navigation Links

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. M. F.Wani	Umida Ziyamukhamedova, Shah Wasil, Sanjay Kumar, Rakesh Sehgal, M. F. Wani, Chandra Shekhar Singh, Nodirjon Tursuno, and Himanshu Shekhar Gupta,	Investigating Friction and Antiwear Characteristics of Organic and Synthetic Oils Using h-BN Nanoparticle Additives: A Tribological Study”. Lubricants 2024, 12, 27.	2024	https://doi.org/10.3390/lubricants12010027	1
	Basant Lal, Abhijit Dey and M. F. Wani,	Influence of TiCp ceramic reinforcement on Ti6Al4V alloy matrix via spark plasma sintering technique,	2024	https://doi.org/10.1080/2374068X.2024.2307304	2
	Mohammad Arif Parray, Sajad Hussain Din and MF Wani,	Enhancing machining performance of EN24 steel with CVD diamond coated tool and minimal quantity lubrication	2024	DOI 10.1088/2631-8695/ad2035	3
	Nabi, S Rathee, MF Wani, M Srivastava	Effect of multiple passes on the properties of Al-5052/SiC surface composites fabricated via friction stir processing	2024	https://doi.org/10.1016/j.matchemphys.2023.128819	4
	Nabi, S Rathee, MF Wani, M Srivastava	Al-5052/SiC+CeO2 hybrid surface composites: Achieving improved microstructural and mechanical behaviour via friction stir processing,	2024	https://doi.org/10.1016/j.matlet.2024.136048	5
	Parray, Mohammad Arif, and Sajad Hussain Din and M F Wani	Enhancing machining performance of EN24 steel with CVD diamond coated tool and minimal quantity lubrication	2024	DOI 10.1088/2631-8695/ad2035.	6
	Sanjay Kumar, Rakesh Sehgal, M.F. Wani, Mukund Dutt Sharma, Umida Ziyamukhamedova, Tahir Ahmad Dar	Next-generation ecofriendly MR fluid: Hybrid GO/Fe2O3 encapsulated carbonyl iron microparticles with improved magnetorheological, tribological, and corrosion resistance properties	2023	https://doi.org/10.1016/j.carbon.2023.118331	7
	Sanjay Kumar, Rakesh Sehgal, M.F. Wani, Mukund Dutt Sharma	Friction and wear properties of core-shell (CI is a core & GO is a shell) particles based magnetorheological fluid under steel on steel point contacts	2023	https://doi.org/10.1016/j.jiec.2022.11.028.	8
	Bishit, C, Wani, M.F. and Sehgal Rakesh	Fabrication and self-lubricating tribological characterization of Cu-Ni/TiC/CaF2 composite for railway switch slide baseplate.	2023	https://doi.org/10.1016/j.wear.2023.204890	9
	Bishit, C, Wani, M.F. and Sehgal Rakesh	Effect of CaF2 nanoparticles on the microstructure evolution, mechanical properties and tribological behaviour of Cu-Ni alloy/cBN self-lubricating composites	2023	https://doi.org/10.1016/j.triboint.2023.108884	10
	Qu Ain, MF Wani, R Sehgal, MK Singh	Insights into nanomechanical and nanotribological characterization of cross-linked polymer nanocomposites via molecular dynamics simulation.	2023		11
	S.H.Mukhtar , Ahraf Gulzar, Shahid Saleem , M.F. Wani , Rakesh Sehgal a, A.A. Yakovenko b, I.G. Goryacheva, Mukund Dutt Sharma	Advances in Development of Solid Lubricating MoS2 Coatings for Space Applications: A Review of Modeling and Experimental Approaches	2023	, https://doi.org/10.1016/j.triboint.2023.109194	12
	S Kumar, R Sehgal, MF Wani, MD Sharma	Magnetorheological study of core− shell structured carbonyl iron/2-D graphene oxide microparticles suspensions with improved sedimentation stability,	2023	https://doi.org/10.1016/j.jmmm.2023.170852.	13
	Himanshu Shekhar Gupta, Rakesh Sehgal, Mohammad Farooq Wani	Energy sources, part a: recovery, utilization, and environmental effects investigating the effect of GnP, ZnO, and CuO nanoparticles on the tribological, rheological, and corrosion behavior of bio-based mahua oil	2023	http://dx.doi.org/10.1080/15567036.2023.2231386	14
	Akshay Balachandran, Irfan Majeed Bhat, Ruheena Tabasum, Ghulam Mohd, Mohammad Farooq Wani, Kowsar Majid, Malik Wahid, Saifullah Lone	Transfer-Printed Environmental-Friendly Anisotropic Filter with Laser-Controlled Micropores for Efficient Oil/Water Separation	2023	https://doi.org/10.1021/acsapm.3c00063	15
	TA Mufti, Shazia Gul Jan, M F Wani, R Sehgal	Development, Mechanical Characterization and High Temperature Tribological Evaluation of Magnetron Sputtered Novel MoS2-CaF2-Ag Coating for Aerospace Applications.	2023	https://doi.org/10.1016/j.triboint.2023.108374.	16
	Umida Ziyamukhamedova, M F Wani, Nodir Tursunov	Investigating Friction and Antiwear Characteristics of Organic and Synthetic Oils using h-BN Nanoparticle Additives	2023		17
	S Bashir, MJ Khan, M. F Wani, SS Saleem, MM John, QJ Ashraf, T Nissar	‘Extreme pressure properties of garlic oil: comparative investigations with PAO4 base oil and PAO/garlic oil blend	2023	DOI 10.1088/2631-8695/acb5e2	18
	Bharat Kumar, Shahid Saleem, M. F. Wani, Rakesh Sehgal, Sanjay Kumar	Influence of Nano-Lubrication on Tribological Behavior of AZ91 Magnesium Alloy Under Fretting Condition	2023	DOI: 10.24874/ti.1426.12.22	19
	Sanjay Kumar, Bharat Kumar, Rishabh Sehgal, MF Wani, Deepak Kumar, Mukund Dutt Sharma, Vivek Singh, Rakesh Sehgal, Vijay Kumar,	Nanoparticles Reinforced Metal Nanocomposites: Mechanical Performance and Durability	2023		20
	M. F. Wani, Umida Ziyamukhamedova, Taseer A. Mufti1, Rakesh Sehgal, and Sheikh S. Saleem	Design, fabrication and characterization of MoS2 self-lubricating pure MoS2 Coatings for space applications using PVD magnetron sputtering	2023	Doi.org/10.1051/e3sconf/202340105084	21
	M. F. Wani, Umida Ziyamukhamedova, Taseer A. Mufti, Rakesh Sehgal, and Sheikh S. Saleem	Fabrication and characterization of RF magnetron sputtered composite MoS2 and ZrN coatings on Ti3SiC2 max phase for space applications.	2023	Doi.org/10.1051/e3sconf/202340105084	22
	Singh, M F Wani, M M Wani	A comparative investigation on tribological properties of piston ring / cylinder liner tribo-pair using GNP and GNF dispersed lubricants Order a copy of this article,	2022	DOI: 10.1504/IJSURFSE.2022.10051381	23
	S, Haris, M F Wani, R. Sehgal, M. D. Sharma	Nano-Mechanical and Nano-Tribological Characterization of Self-Lubricating MoS2 Nano-Structured Coating for Space Applications	2022	https://doi.org/10.1016/j.triboint.2022.108017	24
	P D Shriviyas, M F Wani, R. Sehgal, C S Bishat, M. S. Charoo, A Raina	Synergetic effect of surface texturing and graphene nanoplatelets on the tribological properties of hybrid self-lubricating composite.	2022	https://doi.org/10.1016/j.triboint.2022.107434	25
	G Khajuria, M F Wani, M J Mir	Impact of Micro-Indentation on Hardness and Indentation Depth of Ni-Cr Super Alloys	2022	https://doi.org/10.1080/2374068X.2022.2091841	26
	PD Srivyas, MS Charoo, M F Wani,R Sehgal, A Raina, MIU Haq,	Impact of surface texturing on the tribological behaviour of aluminium-silicon (Al-Si/Al2O3) advanced composite under dry and lubricating conditions	2022		27
	Kumar Parveen, Jibin Philip, M F Wani, Rai Himanshu, Vashishtha Himanshu, Kumar Deepak	Study of Tribological Properties of EN8 Steel against Inconel X-750 Alloy under Dry and Lubricated Conditions,	2022	ttps://doi.org/10.1007/s12666-022-02787-z.	28
	HS Gupta, R Sehgal, M F Wani	Tribological characterization of eco-friendly bio-based mahua and flaxseed oil through nanoparticles	2022		29
	M F Wani, A Chartfi, R Aziz, M Kharrat, S Rakesh	Tribological behaviour of nano-sized beta phase silicon nitride: Effects of the contact conditions	2022	https://doi.org/10.1515/ijmr-2021-8685	30
	B Lal, A Dey, M F Wani	Effect of mechanically mixed layers during dry sliding contact of Ti6Al4V alloys at high temperature in Vacuum condition	2022	https://doi.org/10.1142/S0218625X2250127X	31
	B Lal, A Dey, M F Wani	Influence of Temperature and Applied Load on Adhesion and Abrasion Wear Characteristics of Ti6Al4V Alloy	2022	DOI: 10.4018/IJSEIMS.302234	32
	Singh G, Wani MF, Wani MM	Fuel energy Saving in SI engines using Graphene and Graphite as Nano additive: A comparative study.	2021	https://doi.org/10.1007/s13204-021-02298-1	33
	Wani M F, Kharrat M, Sehgal R	Friction and wear characterization of nanocomposites based on Si3N4 reinforced with SiC, Mo, MoSi2 nano-particles.	2021		34
	B Lal, A Dey, M F Wani,	Prediction of Surface Roughness During Dry Sliding Wear: Characteristics of Ti-6Al-4V Alloys.	2021	.DOI: 10.4018/IJSEIMS.2022010104	35
	Md Al-Amin Ahmad, MA Rani, T VV N Rao, M Danish, A b Mahfouz, R P Parameswari, M F Wani	Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process	2021	https:// doi.org/10.1016/j.matchemphys. 2021.125320	36
	Singh G, Wani MF, Wani MM.	Tribological evaluation of piston ring/cylinder liner assembly in automotive engines using GNP as a lubricant additive	2021		37
	Banday S, Wani, M. F.	Adhesion Strength and Tribological Property of Self-lubricating Si/MoS2 Nanocoating by Pulsed Laser Deposition Method.	2021	; https:// doi.org/10.1016/ j.ceramint. 2021.09.068	38
	Singh G, Wani MF, Wani MM	A Comparative Investigation on Tribological Properties Of Piston Ring/Cylinder Liner Tribo-Pair Using GNP and GNF Dispersed Lubricants.	2021		39
	Singh G, Wani MF, Wani MM	An Experimental Study on Fuel Energy Saving in Gasoline Engines Using GNP as a Lubricant Additive	2021		40
	Kumar S, Sehgal R, Wani MF, Sharma MD	Stabilization and Tribological Properties of Magnetorheological (MR) Fluids: A Review.	2021	. https://doi.org/10.1016/j.jmmm.2021.168295	41

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. G.A. Harmain	Showkat Ahmad Kanth, Aazim Shafi Lone, GA Harmain, Azher Jameel,	“Estimation of crack tip plastic zones in presence of material irregularities by extended finite element method”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer Berlin Heidelberg.	2023	https://doi.org/10.1007/s40430-023-04235-5	42
	Hemant Kumar, Rismaya Kumar Mishra, Ghulam Ashraf Ul Harmain,	“Effect of mating material on wear behaviour of Nibased hardface coating”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications.	2023	https://doi.org/10.1177/14644207231190492	43
	Chandra Kant, Gulam Ashraf Ul Harmain,	“Effect of cold working on mechanical properties of pure-304L stainless steel with variable temperature-an experimental study”, Advances in Materials and Processing Technologies.	2023	doi.org/10.1080/2374068X.2023.2199228	44
	Aazim Shafi Lone, G A Harmain, Azher Jameel,	“Modeling of contact interfaces by penalty based enriched finite element method”, Mechanics of Advanced Materials and Structures, Taylor and Francis.	2022	doi.org/10.1080/15376494.2022.2034075	45
	Aazim Shafi Lone, GA Harmain, Azher Jameel,	“Modeling of Large Sliding Between Contacting Bodies by Penalty-Based Element-Free Galerkin Method Using Node-to-Segment Approach”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering.	2023	doi.org/10.1007/s40997-023-00605-5	46
	Deepak Kumar, GA Harmain, Gaurav Gaurav, KP Lijesh, Basil Kuriachen, Harish Hirani, Jibin T Philip,	“A Novel Seal Design to Enhance MR Brake Performance”, Transactions of the Indian Institute of Metals.	2022	10.1007/s12666-022-02848-3	47
	Showkat Ahmad Kanth, GA Harmain, Azher Jameel,	“Assessment of Fatigue Life in Presence of Different Hole Geometries by X-FEM”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Springer International Publishing,	2022	10.1007/s40997-022-00569-y	48
	Ashutosh Kumar, GA Harmain,	“A Study on Fatigue Life Assessment of Alloy 718 as a Function of Load Ratio in Conjunction with Newman’s Model”, Transactions of the Indian Institute of Metals,	2022	10.1007/s12666-022-02812-1	49
	Showkat Ahmad Kanth, G.A Harmain, Azher Jameel,	“Investigation of fatigue crack growth in engineering components containing different types of material irregularities by XFEM”, Mechanics of Advanced Materials and Structures, Taylor and Francis.	2021	doi.org/10.1080/15376494.2021.1907003	50
	Rismaya Kumar Mishra, Hemant Kumar, G.A Harmain, Shaju, K Albert,	“Comparative wear behaviour of Ni-Cr-B-Si hardface coatings made by cold metal transfer and plasma transfer Arc welding processes”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.	2022		51
	G. A. Harmain, Aazim Shafi Lone, Azher Jameel,	“Enriched element free Galerkin method for solving frictional contact between solid bodies”, Mechanics of Advanced Materials and Structures, Taylor and Francis,	2022	doi.org/10.1080/15376494.2022.2092791	52
	Ishfaq Amin Maekai, G.A. Harmain,	“Resistance to slurry erosion by WC-10Co-4Cr and Cr3C2− 25 (Ni20Cr) coaOngs deposited by HVOF stainless steel F6NM”, International Journal of Refractory Metals and Hard Materials, 2022,	2022	doi.org/10.1016/j.ijrmhm.2022.105830	53
	G. A. Harmain, Aazim Shafi Lone, Azher Jameel,	“Modeling of contact interfaces by penalty based enriched finite element method”, Mechanics of Advanced Materials and Structures, Taylor and Francis,	2022	10.1080/15376494.2022.2034075	54
	Chandan, G. A. Harmain,	“Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740H”, International Journal of Pressure Vessels and Piping, Elsevier, Sept 2021.,	2021	doi.org/10.1016/j.ijpvp.2021.104551	55
	Mohammad Zehab Ud Din, G. A. Harmain,	“An Assessment of Sediment Erosion on Pelton Buckets using CFD”, Hydro Power and Dams, 2021.	2021	https://doi.org/10.1177/14644207221103517	56
	Rishmaya, G. A. Harmain,	“Wear Performance of Ni-Cr-B-Si Hard-face Coatings Fabricated by Cold Metal Transfer Welding”, Part C: Journal of Mechanical Engineering Science.2021,	2021	10.1177/09544062211023085	57
	Showkat Ahmad Kanth, G.A. Harmain, Azher Jameel,	“Investigation of fatigue crack growth in engineering components containing different types of material irregularities by XFEM”, Mechanics of Advanced Materials and Structures, Taylor & Francis, 2021,	2021	10.1080/15376494.2021.1907003	58
	Chandra Kant, G. A. Harmain,	“A Model Based Study of Fatigue Life Prediction for Multifarious Loadings”, Key Engineering Materials”, Trans Tech Publications Ltd, 2021,	2021	10.4028/www.scientific.net/KEM.882.296	59
	Ishfaq Amin Maekai, G.A. Harmain,	“An assessment of erosive wear of hydro-turbine steel using statistical modeling and optimization”, International Journal of Surface Science and Engineering, July 2021,	2021	10.24874/ti.780.10.19.02	60
	Chandra Kant, G. A. Harmain,	“Fatigue Life Prediction under Interspersed Over-load in Constant Amplitude Loading Spectrum via Crack Closure and Plastic Zone Interaction Models - A Comparative Study”, 9 th International Conference on Fracture, Fatigue and Wear, FFW 2021,	2nd – 3rd August 2021		61
	Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani,	“A study on machinability of heat-treated Inconel 718 using Ceramic inserts”, IEEE Sponsored International Conference on Emerging Trends in Industry 4.0, OP Jindal University, Raigarh, Chhattisgarh, India,	19-21 May, 2021.		62
	Chandra Kant & G. A. Harmain	“Fatigue Life Prediction Under Interspersed Overload in Constant Amplitude Loading Spectrum via Crack Closure and Plastic Zone Interaction Models—A Comparative Study”, Proceedings of the 9th International Conference on Fracture, Fatigue and Wear, Springer,	2022	10.1007/978-981-16-8810-2_18, ISBN: 978-981-16- 8809, 253 – 260, 2022	63
	Chandra Kant & G. A. Harmain,	“Analysis of Single Overload Effect on Fatigue Crack Propagation Using Modified Virtual Crack Annealing Model”, Recent Development in Mechanics and Design, Springer,	2022	10.1007/978-981-19-4140-5_1, ISBN: 978-981- 19-4139-9, 1 – 8, 2022	64
	Malik Parvez, G. A. Harmain, Jaleel Khan,	“Flow Characteristics of Power Law Fluid Around Circular Cylinder”, Recent Advances in Mechanical Engineering, Springer,	2022	ISBN: 978-981-19-2188-9, 225 – 236, 2022.	65
	Raj Kumar, Mohammad Mursaleen, GA Harmain, Ashutosh Kumar,	“A Critical Review of Fatigue Life Prediction on 316LN SS”, Advances in Modelling and Optimization of Manufacturing and Industrial Systems pp 427–440	2023		66

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. Adnan Qayoum	Bisma Ali, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir	Effect of graphene/hydrofluoroether (HFE-7100) nanofluids on start-up and thermal characteristics of pulsating heat pipe	2023	https://doi.org/10.1007/s10973-022-11929-w	67
	Amir Yousuf Bhat, Adnan Qayoum	Synergistic impact of tube configuration and working fluid on photovoltaic-thermal system performance	2023	https://doi.org/10.1016/j.renene.2023.02.086	68
	Mohammad Kamran, Adnan Qayoum	Experimental investigation of natural convection of Fe3O4-water nanofluid in a cubic cavity	2023	https://doi.org/10.1080/01932691.2023.2173607	69
	Amir Yousuf Bhat, Adnan Qayoum	Performance enhancement of Photovoltaic-thermal system using hybrid tubes: An assessment of thermodynamic and thermohydraulic efficiencies	2023	https://doi.org/10.1016/j.applthermaleng.2023.120652	70
	Bisma ALI, Adnan QAYOUM, Shahid SALEEM, Fasil Qayoum MIR	Experimental investigation of nanofluids for heat pipes used in solar photovoltaic panels	2023		71
	Mohammed DILAWAR, Adnan QAYOUM	Simulation of vapour compression air conditioning system using Al2O3 based nanofluid refrigerant	2023	https://doi.org/10.18186/thermal.1377210	72
	Mohammed Dilawar, Adnan Qayoum	Performance analysis of R290/R600a–Al2O3 mixtures in household refrigerator	2023	https://doi.org/10.1007/s12046-023-02336-4	73
	Mohammed Dilawar, Adnan Qayoum	Performance evaluation of novel refrigerant mixtures in an air conditioning system using Al2O3 nanolubricant	2023	https://doi.org/10.1007/s10973-023-12471-z	74
	Amir Yousf Sofi, Adnan Qayoum	Numerical Investigation of Thermo-Hydraulic Performance and Irreversibility Behaviour in a Pulsating Turbulent Flow Ribbed Duct	2023	https://doi.org/10.1007/s13369-023-07902-w	75
	Mohammad KAMRAN, Adnan QAYOUM	Investigation of thermo-rheological properties of Fe3O4/Ethylene glycol nanofluid in a square cavity	2023	https://doi.org/10.18186/thermal.1377221	76
	Yellu KUMAR, Adnan QAYOUM, Shahid SALEEM, Fasil QAYOUM MIR	Combined effect of upstream ramp and effusion cooling in combustion chamber liners of gas turbine	2023	DOI: 10.18186/thermal.1283203	77
	Amir Yousuf Bhat, Adnan Qayoum	Viscosity of CuO nanofluids: Experimental investigation and modelling with FFBP-ANN	2022	https://doi.org/10.1016/j.tca.2022.179267	78
	Bisma Ali, Adnan Qayoum, Shahid Saleem, F.Q Mir	Synthesis and characterization of high-quality multi layered graphene by electrochemical exfoliation of graphite	2022	http://dx.doi.org/10.17515/resm2022.384na0121	79
	Mohammad Kamran, Adnan Qayoum	Effect of ZnO nanofluids on thermo-hydraulic characteristic of flow in a heated duct	2022	https://doi.org/10.1080/15567036.2022.2154871	80
	Masrat Bashir, Adnan Qayoum, Sheikh Shahid Saleem	Effect of banana peel powder on the fade and recovery of brake friction material	2022	https://doi.org/10.1007/s11837-022-05223-1	81
	Mohammed Dilawar, Adnan Qayoum	Performance study of aluminium oxide based nanorefrigerant in an air-conditioning system	2022	http://dx.doi.org/10.17515/resm2022.459ma0701	82
	Amir Yousf Sofi, Adnan Qayoum	Heat Transfer and Fluid Flow Characteristics in a Two Pass Duct with Variable Rib Shapes: A CFD Analysis	2022	https://doi.org/10.1007/978-981-99-6343-0_35	83
	Amir Yousuf Bhat, Adnan Qayoum	Thermohydraulic Performance of a Photovoltaic Thermal System Using CuO/EG Nanofluid	2022	https://doi.org/10.1007/978-981-99-7047-6_8	84
	K R Yellu Kumar, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir	Effect of blowing ratio on adiabatic effectiveness for effusion cooling in gas turbine combustor liners	2022	http://dx.doi.org/10.17515/resm2022.359me1028	85
	Ayaz Ahmed, Adnan Qayoum, Fasil Qayoom Mir	Spectroscopic studies of renewable insulation materials for energy saving in building sector	2021	https://doi.org/10.1016/j.jobe.2021.103300	86

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. N. A. Sheikh	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Erosion Behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 Coated Mild Steel	2023	https://doi.org/10.1007/s11665-022-07657-9	87
	Ali Imran Ansari, Nazir Ahmad Sheikh	Simulation and Experimental Assesment of acrylonitrile butadiene styrene polymer based new lattice design	2023	https://doi.org/10.1007/s40032-023-00928-x	88
	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Tribo-corrosion behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 coated mild steel	2023	https://doi.org/10.1016/j.arabjc.2023.104648	89
	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Wear and Corrosion Behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2-Coated Mild Steel	2023	https://doi.org/10.1007/s11665-023-07801-z	90
	Ali Imran Ansari, Nazir Ahmad Sheikh	Biocompatible Scaffold Based on Silk Fibroin for Tissue Engineering Applications	2023	https://doi.org/10.1007/s40032-022-00891-z	91
	S Ahmad, R House, DL Holness, R Nisenbaum, AMS Thompson	Evaluation of neurological testing for hand–arm vibration syndrome	2023	https://doi.org/10.1093/occmed/kqac137	92
	Ali Imran Ansari, Nazir Ahmad Sheikh	A Review on Different Approaches for Foam Fabrication	2023	https://doi.org/10.1007/s40032-023-00998-x	93
	Ali Imran Ansari, Nazir Ahmad Sheikh	A Review on Materials Application in Scaffold Design by Fused Deposition Method	2023	https://doi.org/10.1007/s40032-023-00988-z	94
	Ali Imran Ansari, Nazir Ahmad Sheikh, Navin Kumar	Simulation and experimental energy absorption behavior of ABS-M30i-based three distinct lattice structures fabricated by polymer 3D printer	2023	https://doi.org/10.1007/s40430-023-04428-y	95
	Ali Imran Ansari, Nazir Ahmad Sheikh, Navin Kumar	Energy-Absorbing Characteristics of an ABS-M30i-based 3D-Printed Periodic Surface and Strut-Based Lattice Structure	2023	https://doi.org/10.1007/s40032-023-00984-3	96
	Ali Imran Ansari, Nazir Ahmad Sheikh	Modeling and Simulation of Scaffolds in Varied Conditions Using CAD and Medical Images	2023	https://doi.org/10.1007/s40032-023-00960-x	97
	Ajaz Ali, Sheikh Nazir Ahmad	Effect of Temperature on Hard TiB2-Al2O3-Ti Coatings Deposited Using Electron Beam Physical Vapor Deposition	2023	https://doi.org/10.1007/s11665-022-07414-y	98
	M Chandarana, VL Sateesh, NA Sheikh, GN Dayananda	Vibration Control of a Smart Composite Plate with Damaged Substrate	2023	https://doi.org/10.1007/s42417-022-00586-w	99
	Ajaz Ali, Sheikh Nazir Ahmad	Mechanical and tribological behavior of TiB2/Al2O3 coating on high-speed steel using electron beam deposition	2022	https://doi.org/10.1016/j.triboint.2022.107681	100
	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Corrosion behaviour OF HVOF deposited Zn–Ni–Cu and Zn–Ni–Cu–TiB2 coatings on mild 102steel	2022	https://doi.org/10.1515/corrrev-2021-0082	101
	Ali Imran Ansari, Nazir Ahmad Sheikh	A Review of Bone Regeneration Mechanisms and Bone Scaffold Fabrication Techniques (Conventional and Non-Conventional)	2022	https://doi.org/10.1007/s40032-022-00880-2	102
	Ali Imran Ansari, Nazir Ahmad Sheikh	Bone Tissue Regeneration: Rapid Prototyping Technology in Scaffold Design	2022	https://doi.org/10.1007/s40032-022-00872-2	103
	Yunis Ahmad Dar, Nazir Ahmad Sheikh	A review of fabrication and properties of spark plasma sintered tungsten carbide based advanced composites	2022	https://doi.org/10.1177/09544089211051590	104
	Kaleem Ahmad Najar, Sheikh Nazir Ahmad, MA Shah, Zahid Mushtaq, Sobura Altaf	A dual-layer approach for enhancing the tribological and machining performance of carbide tools in dry turning of mild-steel alloy	2022	https://doi.org/10.1504/IJMMM.2022.122784	105
	Ansari Ali Imran Habib, Nazir Ahmad Sheikh	3D printing review in numerous applications for dentistry	2022	https://doi.org/10.1007/s40032-022-00810-2	106
	Rizwan Ul Haq, Umashankar Kumar, Naveen Kumar, Yash Baranwal, Mohd Mursaleen, Nazir Ahmad Sheikh	Design and manufacturing of low cost SCARA robot	2021		107

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. M.M. Wani	Singh G, Wani MF, Wani MM	A comparative investigation on tribological properties of piston ring / cylinder liner tribo-pair using GNP and GNF dispersed lubricants Order a copy of this article,	2022	DOI: 10.1504/IJSURFSE.2022.10051381	108
	Singh G, Wani MF, Wani MM	Fuel energy Saving in SI engines using Graphene and Graphite as Nano additive: A comparative study.	2021	https://doi.org/10.1007/s13204-021-02298-1	109
	Singh G, Wani MF, Wani MM	Tribological evaluation of piston/cylinder linear assembly in automotive engines using GNP as a lubricant additive	2021		110
	Singh G, Wani MF, Wani MM	An Experimental Study on Fuel Energy Saving in Gasoline Engines Using GNP as a Lubricant Additive	2021	https://doi.org/10.1177/14680874211039688	111

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. Babar Ahmad	Tariq Ahmad, Noor Zaman Khan, Arshad Noor Siddiquee, Babar Ahmad	Investigations on surface properties and surface morphology in dissimilar joining of WE43 and AA-7075 alloy	2024	https://doi.org/10.1016/j.triboint.2024.109302	112
	Mohammad Ashraf Mir, Sheikh Shahid Ul Islam, Noor Zaman Khan, Babar Ahmad, Arshad Noor Siddiquee	Effect of processing parameters on microstructure and tensile strength of stainless steel	2024		113
	Shahid Manzoor wani,Babar Ahmad,Sheikh Shahid Saleem	Nano-mechanical and nano-tribological characterization of Ni-Co-BN nano-composite coating for bearing applications	2023	https://doi.org/10.1016/j.triboint.2023.108281	114
	Omar Hussain, Babar Ahmad, Sheikh Shahid Saleem	Biomaterials for artificial knee joint replacement: a review	2023	https://doi.org/10.1504/IJMATEI.2023.130129	115
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad, Vinayak Malik	Effect of process parameters on surface composite fabrication of newly commercialized Mg-ZE41 alloy by friction stir processing (FSP): microstructural development and microhardness	2023		116
	Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem	Nanomechanical and Nanotribological Characterization of Co-BN Nano-composite Coating on Al-Si Substrate	2023		117
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Mechanical, Wear, and Corrosion Properties Investigation of ZE41/TiB2 Surface Composites Fabricated by Friction Stir Processing	2022	https://doi.org/10.1115/1.4054872	118
	Suhail Ganiny, Majid H Koul, Babar Ahmad	Analysis of Limit Cycle Oscillations in Dual-rate Haptic Rendering: Effect of Dual-rate Sampling	2022	https://doi.org/10.1016/j.ifacol.2022.04.107	119
	Suhail Ganiny, Majid H Koul, Babar Ahmad	Identification of the most conservative stability bounds for a class of multi-rate haptics controllers	2022	https://doi.org/10.1504/IJMIC.2022.128311	120
	SA Manroo, NZ Khan, B Ahmad	Study on surface modification and fabrication of surface composites of magnesium alloys by friction stir processing: a review	2022		121
	Omar Hussain, Babar Ahmad, Shahid Saleem	Analysis of tribological behavior of medical-grade UHMW polyethylene under dry and lubricated conditions with human body fluids using Taguchi and GRA techniques	2022	https://doi.org/10.1177/0892705720941907	122
	Diyan ul Imaan, Fasil Qayoom Mir, Babar Ahmad	In-situ preparation of PSSA functionalized ZWP/sulfonated PVDF composite electrolyte as proton exchange membrane for DMFC applications	2022	https://doi.org/10.1016/j.ijhydene.2021.12.199	123
	Omar Hussain, Shahid Saleem Sheikh, Babar Ahmad	Fabrication and tribological behavior of novel UHMWPE/vitamin-C/graphene nanoplatelets based hybrid composite for joint replacement	2022		124
	Suhail Ahmed, Manroo, Vinayak Malik, Babar Ahmad	Surface moderation and composite fabrication of die-cast magnesium alloys via friction stir processing: a review	2022	https://doi.org/10.1080/2374068X.2021.1970998	125
	Omar Hussain, Babar Ahmad, Shahid Saleem Sheikh	Biotribological performance of medical-grade UHMW polyethylene-based hybrid composite for joint replacement	2021	https://doi.org/10.1177/09673911211058088	126
	Suhail Ganiny, Majid H Koul, Babar Ahmad	Time-delayed dual-rate haptic rendering: stability analysis and reduced order modeling	2021		127

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Mohammad Hanief	Mohammad Hanief, Hashim Khursheed, M.s. Charoo, M.Zubair	Investigation of Lubrication Characteristics of virgin and additive blended Jatropha based grease	25/09/2023	DOI: 10.24874/ti.1471.04.23.09	128
	M. Hanief*, K. Zaman, S. Ul Bashir, J. Showkat, M. Zubair	Investigation on cypress wood membrane for water filtration	Jan 2022	DOI: 10.34049/bcc.53.D.10	129
	Asaf Hanief Kohli, M Hanief, Vishal Jagota	A retrospection of the effect of nitriding processes on the AISI H13 tool steel	Apr 2023	https://doi.org/10.1080/2374068X.2022.2093012	130
	Zahid Maqbool, M.hanief , Malik Parveez	Review on performance enhancement of phase change material based heat sinks in conjugation with thermal condultivity enhancers for electronic cooling	2023	https://doi.org/10.1016/j.est.2022.106591	131
	Mir Mohsin John, M. Hanief	Frictional noise mitigation using synergetic approach of laser surface texturing and bio-lubrication	2022	https://doi.org/10.1016/j.triboint.2022.108056	132
	Mir Mohsin John, M. Hanief,Suhail ganiny	Predictive modelling of pump noise using multi-linear regression and random-forest models - via optimal data splitting	January 11, 2023	https://doi.org/10.1504/IJSPM.2022.128274	133
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Experimental assessment of recycling methods of used engine oil for sustainable environment	10 May 2022	http://dx.doi.org/10.17515/resm2022.385ma0113	134
	Zahid mushtaq, M.hanief	Tribological investigation of molybdenum disulphide nanoparticles and graphene nanoflakes as lubricant additives in Karanja oil	2022	https://doi.org/10.1504/IJSURFSE.2022.124011	135
	Zahid Maqbool, M.hanief , Malik Parveez	Effect of CuO-GnP binary mixture on thermal properties of organic PCM	Nov 2023	https://doi.org/10.1016/j.matlet.2023.135118	136
	Zahid Maqbool, M.hanief ,	Influence of materials hardness and operating parameters on the surface roughness during reciprocating sliding	Nov 2021		137
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Condition monitoring of used engine oil by FTIR spectroscopy- A Review	Dec 2021		138
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Critical retrospection and evaluation of waste engine oil recycling methods	2023		139
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Recycling of waste lubricating oil using ultra filtration membrane and modelling of its rehelogical behaviour using guass-newton algorithim	2023		140
	Mir Mohsin John, M. Hanief	Modeling frictional noise using artificial neural network and regression	2023		141
	Mohammad Hanief, wani khalid, Fozia Akhter, M.s. Charoo, M.Zubair	Effect of saturated fatty acids on the antiwear and rheological properties of olive oil	2023		142

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. M. S. Charoo	Pranav Dev Srivyas, MF Wani, Rakesh Sehgal, Chandra Shekhar Singh Bisht, MS Charoo, Ankush Raina, Mir Irfan Ul Haq	Synergetic effect of surface texturing and graphene nanoplatelets on the tribological properties of hybrid self-lubricating composite	2022	https://doi.org/10.1016/j.triboint.2022.107434	143
	Mehak Nisar, MS Charoo	Optimization of fretting wear parameters and effect of high temperature on fretting wear behavior of Al6061 alloy and Al6061-SiC composite	2022	https://doi.org/10.1007/s12633-021-01172-7	144
	Wani Khalid Shafi, MS Charoo	An experimental study on the effect of concentration of green nanoadditives on the tribological properties of the biolubricants	2022	https://doi.org/10.1177/09544062211042046	145
	Shariq Ahmad Bhat, MS Charoo	Rheological characteristics of coconut grease with graphene nanoplatelets	2022	https://doi.org/10.1007/s13399-021-02118-0	146
	Pranav Dev Srivyas, MS Charoo, Tanmoy Medhi, Shariq Ahmad Bhat,	Tribological behaviour of rice bran and sesame greases using h-BN and CuO particles	2023		147
	Mehak Nisar, MS Charoo	A Comparative Analysis of Corrosion Performance of Piston Alloy and Its Composite in Marine, Mining and Basic Environments	2022	https://doi.org/10.1007/s40735-022-00645-5	148
	Shariq Ahmad Bhat, MS Charoo	Rheological and tribological properties of rice bran oil grease (RBOG) with h-BN nanoparticles-An experimental study	2022		149
	Mehak Nissar M.S. Charoo, Fozia Akhter, Muhammad Hanief, Wani Khalid Shafi	Effect of Saturated Fatty Acids on the Antiwear and Rheological Properties of Olive Oil	2023	Doi;10.24874/ti.1404.11.22.02	150
	Pankaj Verma, MS Charoo, Pranav Dev Srivyas, Tanmoy Medhi	Enhanced extreme pressure and tribological performance of hybrid nano lubricant	2023	https://doi.org/10.1080/17515831.2023.2235230	151
	Mehak Nisar and Mohammad Shafi Charoo	Tribological investigations on piston alloy based hybrid nano composite and GGG40 spheroidal cast iron under reciprocating dry sliding conditions	2023	https://doi.org/10.1177/09544062231225020	152
	Shariq Ahmad Bhat, MS Charoo	Formulation and rheology of bio-grease mixed with h-BN nanoparticles	2021		153

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Saad Parvez	Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez	Friction based solid state welding–A review	2022-1-1	https://doi.org/10.1016/j.matpr.2022.01.457	154
	Fayaz Ahmad Mir, Noor Zaman Khan, Saad Parvez, Arshad Noor Siddiquee	Investigations on surface properties of friction stir welded dissimilar AA2024-T3 and 304 stainless steel joints	2024-1	https://doi.org/10.1016/j.triboint.2024.109312	155
	and Saad Parvez Fayaz Ahmad Mir, Noor Zaman Khan	Effect of tool–pin offset on microstructure, mechanical properties, and corrosion behavior of friction stir welded AA2024-T3 and SS304 dissimilar joints	2023-11	https://doi.org/10.1177/14644207231217479	156
	Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez	Joining of aluminium matrix composites using friction stir welding: A review	2022-5	https://doi.org/10.1177/14644207211069616	157

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Sheikh Shahid Saleem	Hussain, O., Ahmad, B., & Sheikh, S.	Biotribological performance of medical-grade UHMW polyethylene-based hybrid composite for joint replacement. Polymers And Polymer Composites, 29(9_suppl), S1424-S1431.	Nov 2021	https://doi.org/10.1177/09673911211058088	158
	Masrat Bashir, Adnan Qayoum and Shahid Saleem	Effect of Banana Peel Powder on the Fade and Recovery of Brake Friction Material. JOM (2022).	15-03-2022	https://doi.org/10.1007/s11837-022-05223-1	159
	K R Yellu Kumar, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir	Effect of blowing ratio on adiabatic effectiveness for effusion cooling in gas turbine combustor liners, Res. Eng. Struct. Mat., 8(3), pp. 431–445,	Mar 2022	http://dx.doi.org/10.17515/resm2022.359me1028	160
	Umair Ashraf, Shahid Saleem, Jebran Khan,	Influence of temperature on the tribo-performance of GGG-60 seat insert against 23–8 N exhaust valve steel, Materials Today: Proceedings, Volume 66, Part 2, 2022, Pages 573-579,	June 2022	https://doi.org/10.1016/j.matpr.2022.06.175	161
	Bisma Ali, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir,	Synthesis and characterization of high-quality multi layered graphene by electrochemical exfoliation of graphite, Res. Eng. Struct. Mat. 8 (3) (2022), 447-462,	2022	http://dx.doi.org /10.17515/resm2022.384na0121	162
	Ali, B., Qayoum, A., Saleem, S. et al.	Effect of graphene/hydrofluoroether (HFE-7100) nanofluids on start-up and thermal characteristics of pulsating heat pipe. J Therm Anal Calorim (2023). 148(9), pp. 3819–3834,	2023	https://doi.org/10.1007/s10973-022-11929-w	163
	Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem,	Nano-mechanical and nano-tribological characterization of Ni-Co-BN nano-composite coating for bearing applications., Tribology International, February 2023, Volume 180, 108281	February 2023	https://doi.org/10.1016/j.triboint.2023.108281.	164
	Shahnaz Bashir, Mohammad Jebran Khan, MF Wani, S Shahid Saleem, Mir Mohsin John, Qazi Junaid Ashraf, Tabin Nissar,	Extreme pressure properties of garlic oil: comparative investigations with PAO4 base oil and PAO/garlic oil blend, Engineering Research Express, 5 (2023) 015057,	2023	DOI 10.1088/2631-8695/acb5e2	165
	Kumar, Y., Qayoum, A., Saleem, S., Mir, F.Q.	Combined effect of upstream ramp and effusion cooling in combustion chamber liners of gas turbine, Journal of Thermal Engineering, 2023, 9(2), pp. 297–312.	2023	DOI 10.18186/thermal.1283203	166
	MF Wani, Umida Ziyamukhamedova, Taseer A Mufti, Rakesh Sehgal, Sheikh S Saleem	Design, fabrication and characterization of MoS2 self-lubricating pure MoS2 Coatings for space applications using PVD magnetron sputtering, E3S Web of Conferences 401, 05084 (2023),	11 July 2023	https://doi.org/10.1051/e3sconf/202340105084	167
	MF Wani, Umida Ziyamukhamedova, Taseer A Mufti, Rakesh Sehgal, Sheikh S Saleem	Fabrication and characterization of RF magnetron sputtered composite MoS2 and ZrN coatings on Ti3SiC2 max phase for space applications,E3S Web of Conferences 401, 05083 (2023),	11 July 2023	https://doi.org/10.1051/e3sconf/202340105083	168
	Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem	Nanomechanical and Nanotribological Characterization of Co-BN Nano-composite Coating on Al-Si Substrate. J. of Materi Eng and Perform (2023).	2023-9-15	https://doi.org/10.1016/j.triboint.2023.109194.	169
	Sheikh Haris Mukhtar, Ahraf Gulzar, Shahid Saleem, MF Wani, Rakesh Sehgal, AA Yakovenko, IG Goryacheva, Mukund Dutt Sharma	Advances in development of solid lubricating MoS2 coatings for space applications: A review of modeling and experimental approaches, Tribology International, Volume 192, 2024, 109194,	2023-12-14	https://doi.org/10.1016/j.triboint.2023.109194.	170
	Narayana Turali, Sheikh Shahid Saleem	Synergetic effect of oleophilic textured surfaces and MoS2 on the tribological properties of Ti-6Al-4V alloy under dry and lubricated sliding conditions, 2024, Surf. Topogr.: Metrol. Prop. 12 015008	2024-1-29	10.1088/2051-672X/ad237e	171
	Narayana Turali, Sheikh Shahid Saleem	Comparative Investigation and Characterization of The Nano-Mechanical and Tribological Behavior of RF Magnetron Sputtered TiN, CrN, and TiB2 Coating on Ti6Al4V Alloy, Tribology International, Volume 193, 2024, 109348	2024-2-1	https://doi.org/10.1016/j.triboint.2024.109348.	172
	Narayana Turali, Sheikh Shahid Saleem	Enhancing Fretting Wear Behavior of Ti64 Alloy: The Impact of Surface Textures and CrN-MoS2-Ag Composite Coating, Tribology International, Volume 193, 2024, 109346,	2024-2-1	https://doi.org/10.1016/j.triboint.2024.109346.	173

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Mohammad Mursaleen	Meruva Manikanteswara Reddy, Mohammad Sarfaraz ahanger, Shubham Sharma,Dasari Tharun,Mohammad Mursaleen	Design and analysis of composite leaf spring under static loading	2021	https://doi.org/10.21467/abstracts.108	174
	Shamas U Din Hajam and Mohammad Mursaleen	Design and Analysis of An Automotive Single Plate Friction Clutch Using Different Materials	2021	https://doi.org/10.21467/abstracts.108	175
	Mohammad Mursaleen Butt, Kaleem Ahmad Najar, Towseef Hussain Dar	Experimental evaluation of multilayered CVD- and PVD-coated carbide turning inserts in severe machining of AISI-4340 steel alloy	2021		176
	Rizwan Ul Haq, Umashankar Kumar, Naveen Kumar, Yash Baranwal, Mohd Mursaleen, Nazir Ahmad Sheikh	Design and Manufacturing of Low Cost SCARA Robot	2021		177
	Avinash,M Mursaleen,Navin Kumar	Nanomechanical properties of human hair using AFM, nanoindentation,SEM and EDX	2021		178
	Misba Jan, Mohammad Mursaleen Butt, and Mohammad Muzaffarul Hassan	Fluid flow characteristics and heat transfer performance in microchannel heat sinks: A review	2022	https://doi.org/10.1177/09544089221142436	179
	Raj Kumar, Mohammad Mursaleen, G. A. Harmain & Ashutosh Kumar	A Critical Review of Fatigue Life Prediction on 316LN SS	2023	https://doi.org/10.1007/978-981-19-6107-6_30	180

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Noor Zaman Khan	Fayaz Ahmad Mir,Noor Zaman Khan, Saad Parvez, Arshad Noor Siddiquee,	Investigations on surface properties of friction stir welded dissimilar AA2024-T3 and 304 stainless steel joints, Tribology International,Volume 193, 2024, 109312	2024	https://doi.org/10.1016/j.triboint.2024.109312.	181
	Tariq Ahmad,Noor Zaman Khan, Arshad Noor Siddiquee, Babar Ahmad,	Investigations on surface properties and surface morphology in dissimilar joining of WE43 and AA-7075 alloy, Tribology International, Volume 192, 109302 .	17-01-2024	https://doi.org/10.1016/j.triboint.2024.109302	182
	Annayath Maqbool, Noor Zaman Khan	Microstructure and corrosion behavior of thermo-mechanically processed rare earth Mg alloy: Effect of friction stir processing, Materials Letters,Volume 359,135934,	13-01-2024	https://doi.org/10.1016/j.matlet.2024.135934.	183
	Sheikh Shahid Ul Islam,Noor Zaman Khan, Mohammad Mohsin Khan, and Arshad Noor Siddiquee	Steel heat treatment: Equipment and process design. Reference Module in Materials Science and Materials Engineering, Elsevier, 2024	01-11-2024	https://doi.org/10.1016/B978-0-323-96020-5.00249-1	184
	AN Siddiquee, N Gangil, D Bajaj, SMAK Mohammed, DL Chen	Autogenous Dissimilar Welding of Copper-to-Stainless Steel via Electron Beam Welding: A Novel Strategy for Achieving Defect-Free Joints. Metall Mater Trans A 55, 635–651 (2024).	28-12-2023	https://doi.org/10.1007/s11661-023-07274-8	185
	Mohammad Owais Qidwai, Irfan Anjum Badruddin, Sarfaraz Kamangar, Mohammad Anas Khan & Mohammad Nawaz Khan	Heat transfer enhancement in multijet micropin fin heat sink, Numerical Heat Transfer, Part A: Applications, pp:1-20	27-12-2023	DOI: 10.1080/10407782.2023.2294349	186
	Mir FA, Noor Zaman Khan Siddiquee AN, Parvez S.	Effect of tool–pin offset on microstructure, mechanical properties, and corrosion behavior of friction stir welded AA2024-T3 and SS304 dissimilar joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2023;0(0).	29/11/2023	https://doi:10.1177/14644207231217479	187
	Annayath Maqbool	Fabrication and characterization of hybrid WE43 Mg alloy-based composite by friction stir processing with improved ductility, Volume 215, September 2023, 112273	09-06-2023	https://doi.org/10.1016/j.vacuum.2023.112273	188
	Mohd Rafiq Parray, , Suhail Ahmed Manroo, Annayath Maqbool	Experimental investigation on fabrication and characterisation of Mg-Al2O3 surface composites, Advances in Materials and Processing Technologies	01-04-2023	https://doi.org/10.1080/2374068X.2023.2198824	189
	Annayath Maqbool, Nadeem Fayaz Lone, Tariq Ahmad, Arshad Noor Siddiquee	Effect of hybrid reinforcement and number of passes on microstructure, mechanical and corrosion behavior of WE43 Mg alloy based metal matrix composite, Journal of Manufacturing Processes, Volume 89, 3 March 2023, Pages 170-181	02-02-2023	https://doi.org/10.1016/j.jmapro.2023.01.070	190
	Azhar Equbal, Sarfaraz Masood, Iftekhar Equbal, Shafi Ahmad, Noor Z Khan, Zahid A Khan	Artificial intelligence against COVID-19 Pandemic: A Comprehensive Insight, Current medical imaging, Volume 19, Number 1, 2023, pp. 1-18(18)	01-01-2023	https://doi.org/10.2174/1573405617666211004115208	191
	Shafi Ahmad, Sarfaraz Masood, Noor Zaman Khan, Irfan Anjum Badruddin, Ali Ahmadian, Zahid A Khan, Amil Hayat Khan	Analysing the impact of COVID-19 pandemic on the psychological health of people using fuzzy MCDM methods, Operations Research Perspectives, Volume 10, 2023, 100263	22-12-2022	https://doi.org/10.1016/j.orp.2022.100263	192
	Annayath Maqbool, Noor Zaman Khan, Arshad Noor Siddiquee, Irfan Anjum Badruddin, Mohamed Hussien, Mohammed Imran Khan	Overcoming challenges in using magnesium-based materials for industrial applications using friction-stir engineering, Materials Science and Technology, Volume 39, Issue 9	22-10-2022	https://doi.org/10.1080/02670836.2022.2158539	193
	Tariq Ahmad, Noor Zaman Khan, Mohammad Mohsin Khan, Nadeem Fayaz Lone, Arshad Noor Siddiquee, Babar Ahmad, Shafi Ahmad, Zahid A Khan, Sheikh Shahid Ul Islam	Fabrication and machinability study of Zn-Al-TiC composite using wire EDM with different dielectric media, Advances in Materials and Processing Technologies, Volume 9, 2023 - Issue 3, Pages 1340-1355	26-08-2022	https://doi.org/10.1080/2374068X.2022.2116878	194
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Mechanical, Wear, and Corrosion Properties Investigation of ZE41/TiB2 Surface Composites Fabricated by Friction Stir Processing, Journal of Manufacturing Science and Engineering, 144(11): 111010 (9 pages)	06-07-2022	https://doi.org/10.1115/1.4054872	195
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad, Vinayak Malik	Effect of process parameters on surface composite fabrication of newly commercialized Mg-ZE41 alloy by friction stir processing (FSP): microstructural development and microhardness, World Journal of Engineering, Vol. 20 No. 5, pp. 857-867.	25-04-2022	https://doi.org/10.1108/WJE-12-2021-0660	196
	Mouminah Amatullah, Mehwish Jan, Munazah Farooq, Afra Saeed Zargar, Annayath Maqbool	Effect of Tool Rotational Speed on the Friction Stir Welded Aluminum Alloys: a Review, Materials Today: Proceedings, Volume 62, Part 1, 2022, Pages 245-250	18-03-2022	https://doi.org/10.1016/j.matpr.2022.03.220	197
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Study on surface modification and fabrication of surface composites of magnesium alloys by friction stir processing: a review, Journal of Engineering and Applied Science, 69, Article number: 25 (2022)	10-03-2022	https://doi.org/10.1186/s44147-022-00073-9	198
	Lubaid Nisar, Aasif Nazir Thoker, Asma Sanjum, Mohd Rafiq Parray, Suhail Ahmed Manroo	Defects analysis in friction stir processing of magnesium-based surface composites, Materials Today: Proceedings. , 2022, Pages 158-162	09-03-2022	https://doi.org/10.1016/j.matpr.2022.02.611.	199
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Development of Nano-Composites on Rare-Earth Mg-ZE41 Alloy Via Friction Stir Processing (FSP): Microstructure, Mechanical, and Tribological Properties, JOM, Volume 74, pages 2047–2062,	04-03-2022	https://doi.org/10.1007/s11837-022-05211-5	200
	Fayaz Ahmad Mir, Arshad Noor Siddiquee, Saad Parvez	Friction based solid state welding–A review, Materials Today: Proceedings, Volume 62, Part 1, 2022, Pages 55-62	10-02-2022	https://doi.org/10.1016/j.matpr.2022.01.457	201
	Md Nadeem Alam, Arshad Noor Siddiquee, Zahid A Khan, Noor Zaman Khan	A comprehensive review on wire EDM performance evaluation, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 236, Issue 4	24-01-2022	https://doi.org/10.1177/09544089221074843	202
	Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez	Joining of aluminium matrix composites using friction stir welding: A review, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Volume 236, Issue 5	19-01-2022	https://doi.org/10.1177/14644207211069616	203
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Effect of Nano-ZrO2 Additions on Fabrication of ZrO2/ZE41 Surface Composites by Friction Stir Processing, Transactions of the Indian Institute of Metals, 75, 1181–1194	16-01-2022	https://doi.org/10.1007/s12666-021-02473-6	204
	Tariq Ahmad, Babar Ahmad, Annayath Maqbool	Recent advances in machining of composites and super alloys by using wire-EDM. A Review, Recent Advances in Manufacturing, Automation, Design and Energy Technologiespp pp115–123	12-10-2021	https://doi.org/10.1007/978-981-16-4222-7_13	205
	Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A Khan, Irfan Anjum Badruddin, Sarfaraz Kamangar, Annayath Maqbool	Improvement in joint efficiency with high productivity and narrow weld formation in friction stir welding, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 236, Issue 2	20-09-2021	https://doi.org/10.1177/09544089211042480	206
	Mohammad Owais Qidwai, Irfan Anjum Badruddin, Mohammad Anas Khan, Saad Alshahrani	Optimization of Microjet location using Surrogate Model coupled with Particle Swarm Optimization Algorithm, Mathematics, 9(17), 2167	05-09-2021	https://doi.org/10.3390/math9172167	207
	Annayath Maqbool, Arshad Noor Siddiquee	Towards Mg based light materials of future: Properties, applications, problems and their mitigation, Journal of Manufacturing Science and Engineering, 144(3): 030801 (18 pages)	17-08-2021	https://doi.org/10.1115/1.4051678	208
	Sameera Mufazzal, SM Muzakkir, Arshad Noor Siddiquee, Zahid A. Khan	A new fuzzy multi-criteria decision-making method based on proximity index value, Journal of Industrial and Production Engineering, 39:1, 42-58	07-08-2021	https://doi.org/10.1080/21681015.2021.1958935	209

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Harveer Singh Pali	Ashish Kumar Singh, Harveer Singh Pali, Mohammad Mohsin Khan	Response surface optimization approach to enhance the performance of diesel engine using ternary blends of biobutanol and biodiesel doped with ZnO nanoparticles, Energy Conversion and Management, Volume 300.	15 January 2024	10.1016/j.enconman.2023.117899	210
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effective utilization of waste plastic derived fuel in CI engine using multi objective optimization through RSM, FuelO, Volume 355.	1 January 2024	10.1016/j.fuel.2023.129448	211
	Harveer Singh Pali, Abhishek Sharma, Naveen Kumar, Yashvir Singh	Optimization of long-term storage stability of Kusum biodiesel using herbal anti-oxidant, Biomass Conversion and Biorefinery, Volume 14, Issue 2, Pages 1959 - 1973.	January 2024	10.1007/s13399-022-02444-x	212
	Akash Dwivedi, Mohammad Mohsin Khan, Harveer Singh Pali	A comprehensive review of thermal enhancement techniques in microchannel heat exchangers and heat sinks, Journal of Thermal Analysis and Calorimetry, Volume 148, Issue 23, Pages 13189 - 13231.	December 2023	10.1007/s10973-023-12451-3	213
	Mohd Mujtaba Ahmed, Harveer Singh Pali, Mohammed Mohsin Khan.	Experimental analysis of diesel/biodiesel blends with a nano additive for the performance and emission characteristics of CI Engine, International Journal of Engine Research, Volume 24, Issue 11, Pages 4500 - 4508.	November 2023	10.1177/14680874221132958	214
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effect of injection timing of waste plastic oil and its blends on CRDI diesel engine, International Journal of Engine Research, Volume 24, Issue 11, Pages 4490 - 4499.	November 2023	10.1177/14680874221119131	215
	Abhishek Sharma, Harveer Singh Pali, Manish Kumar, Nishant Kumar Singh, Yashvir Singh, Deepak Singh	Study the effect of optimized input parameters on a CRDI diesel engine running with waste frying oil methyl ester-diesel blend fuel with ZnO nanoparticles: a response surface methodology approach, Biomass Conversion and Biorefinery, Volume 13, Issue 14, Pages 13127 - 13152.	September 2023	10.1007/s13399-021-02158-6	216
	Yashvir Singh, Harveer S Pali, Nishant K Singh, Abhishek Sharma, Amneesh Singla	Effect of nanoparticles as additives to the biofuels and their feasibility assessment on the engine performance and emission analysis—A review, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 237, Issue 2, Pages 492 - 510.	April 2023	10.1177/09544089221109723	217
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	A comprehensive review on the production of alternative fuel through medical plastic waste, Sustainable Energy Technologies and Assessments, Volume 55.	February 2023	10.1016/j.seta.2022.102924	218
	R.H. Vali, H.S. Pali, M.M. Ahmed, A.K. Singh, A. Kumar, A. Sharma	Predictive modelling through RSM for diesel engine using Al2O3 nanoparticles fuel blends	2023	10.1007/s13762-023-05317-6	219
	Harveer Singh Pali, Abhishek Sharma, Manish Kumar, Vivek Anand Annakodi, Van Nhanh Nguyen, Nishant Kumar Singh, Yashvir Singh, Dhinesh Balasubramanian, Balakrishnan Deepanraj, Thanh Hai Truong, Phuoc Quy Phong Nguyen	Enhancement of combustion characteristics of waste cooking oil biodiesel using TiO2 nanofluid blends through RSM, Fuel, Volume 331	1 January 2023	10.1016/j.fuel.2022.125681	220
	R. Hussain Vali, Anh Tuan Hoang, M. Marouf Wani, Harveer Singh Pali, Dhinesh Balasubramanian, Müslüm Arici, Zafar Said, Xuan Phuong Nguyen.	Optimization of variable compression ratio diesel engine fueled with Zinc oxide nanoparticles and biodiesel emulsion using response surface methodology, Fuel, Volume 323.	1 September 2022	10.1016/j.fuel.2022.124290	221
	Abhishek Sharma, Harveer Singh Pali, Manish Kumar, Nishant Kumar Singh, Erween Abd Rahim, Yashvir Singh, Naveen Kumar Gupta.	Effect of α-aluminium oxide nano additives with Sal biodiesel blend as a potential alternative fuel for existing DI diesel engine, Energy and Environment.	2022	10.1177/0958305X221133257	222
	Harveer Singh Pali, Abhishek Sharma, Naveen Kumar, Yashvir Singh.	Biodiesel yield and properties optimization from Kusum oil by RSM, Fuel, Volume 291	1 May 2021	10.1016/j.fuel.2021.120218	223
	Ashish Kumar Singh, Harveer Singh Pali, Mohammad Mohsin Khan	Performance and emission analysis of waste animal fat methyl esters blends on naturally aspirated single cylinder engine, Journal of Engineering Research (Kuwait), Volume 9	2021	10.36909/jer.ICCEMME.15833	224

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Abhijit Dey	Basant Lal, Abhijit Dey, Mohamamd Farooq Wani	Influence of TiCp ceramic reinforcement on Ti6Al4V alloy matrix via spark plasma sintering technique,	2024	https://doi.org/10.1080/2374068X.2024.2307304	225
	Khursheed Ahmad Sheikh, Mohammad Mohsin Khan, Abhijit Dey	Comprehensive Analysis of TiC-Reinforced ZA-37 Alloy Matrix Composites: Microstructural, Hardness, and Corrosion Performance	2024	https://doi.org/10.1007/s40735-024-00823-7	226
	Basant Lal, Abhijit Dey	Fretting wear characteristics of Ti6Al4V/TiC nano composites Using Response Surface Method	2024	https://doi.org/10.1016/j.triboint.2024.109412	227
	H. K. Mahilary. Dey A.	Preparation and application of carboxylated and mechanically attrited carbon for adsorptive removal of crystal violet dye.	2023	DOI https://doi.org/10.1039/D2EW00723A	228
	Abhijit Dey, Premdeep Singh Rathee, Mohammad Mohsin Khan	Computational Fluid Dynamics Approach for Frictional Heat Flow Analysis During Friction Stir Welding Process	2023	https://doi.org/10.1007/s13369-022-07215-4	229
	Amit Kumar Dey Abhijit Dey	Use of electrochemical technique for the removal of lead and nickel from modelled aqueous solution, 12 (8).	2023	doi: 10.48047/ecb/2023.12.8.74	230
	Mohammad Mohsin Khan, Abhijit Dey	Microstructure-abrasive wear correlation of in situ ZA27/TiC composites, 48 (16), 22928-22942	2022	https://doi.org/10.1016/j.ceramint.2022.04.250	231
	G Chaudhary, A Dey, AK Dey	Stress and Delamination Analysis on Overlapped-Grouped and Overlapped-Dispersed Tapered Composite Laminate, 58 (5), 612-623.	2022	https://doi.org/10.1007/s10778-023-01185-2	232
	Mohammad Mohsin Khan, Abhijit Dey	Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiCp MMCs	2022	https://doi.org/10.1016/j.matchemphys.2021.125319	233
	Basant Lal, Abhijit Dey, Mohamamd Farooq Wani	Prediction of Surface Roughness During Dry Sliding Wear: Characteristics of Ti-6Al-4V Alloys, 10(1), 12.	2022	DOI: 10.4018/IJSEIMS.2022010104	234
	RUMI GOSWAMI, AMIT KUMAR DEY, ABHIJIT DEY	POSITIVE IMPACT ON ENVIRONMENT DUE TO COVID-19 LOCKDOWNS IN PARTS OF INDIA: A REVIEW	2022	DOI:10.30638/eemj.2022.052	235
	Amit Kumar Dey, Abhijit Dey, Rumi Goswami	Fixed-bed column analysis for adsorption of Acid scarlet 3R dye from aqueous solution onto chemically modified betel nut husk fibre	2022	doi: 10.5004/dwt.2022.28253	236
	RUMI GOSWAMI AMIT KUMAR DEY AND ABHIJIT DEY	COMPARATIVE ANALYSIS ON AIR AND WATER QUALITY IN PARTS OF INDIA: BEFORE AND DURING LOCKDOWN DUE TO COVID -19, 1492-1501.	2022		237
	Basant Lal, Abhijit Dey, MF Wani	Effect of Frictional Heating on Mechanically Mixed Layers during Dry Sliding Contact of Ti-6Al-4V Alloys at High Temperature in Vacuum Condition, 29 (10), 2250127	2022	https://doi.org/10.1142/S0218625X2250127X	238
	B Lal, A Dey, MF Wani	INFLUENCE OF TEMPERATURE AND APPLIED LOAD ON ADHESION AND ABRASION WEAR CHARACTERISTICS OF TI6AL4V ALLOY, 10 (1),11.	2022	DOI: 10.4018/IJSEIMS.302234	239
	Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, Bibhuti Bhushan Biswal	Processing of hardened steel by MQL technique using nano cutting fluids,2021/2/17,Materials and Manufacturing Processes,316-328,36.	2021-2-17	doi.org/10.1080/10426914.2020.1832688	240
	Abhijit Dey, Mrinal Shrivastav, Pawan Kumar	Optimum performance evaluation during machining of Al6061/cenosphere AMCs using TOPSIS and VIKOR based multi-criteria approach, 2174-2188	2021	https://doi.org/10.1177/0954405420958770	241
	Abhijit Dey, Krishna Murari Pandey, Ram Naresh Rai, Akhtar Khan, Anshuman Das	APPLICATION POTENTIAL OF RESPONSE SURFACE METHOD ON ELECTRO DISCHARGE MACHINING OF AA6061–CENOSPHERE AMCs PREPARED BY COMPOCASTING METHOD, 2150056	2021	https://doi.org/10.1142/S0218625X21500566	242
	Mohammad Mohsin Khan, Abhijit Dey, Mohammad Irfan Hajam	Experimental Investigation and Optimization of Dry Sliding Wear Test Parameters of Aluminum Based composite, 14, 4009-4026.	2021	https://doi.org/10.1007/s12633-021-01158-5	243
	Abhijit Dey, Mohammad Mohsin Khan	MCD Approach for Assessing the Optimal Operating Condition during Sliding Wear Characteristics of LM25/SiC AMCs Processed by an Improved Stir Casting Technique, 14, 3673-3691.	2021	https://doi.org/10.1007/s12633-021-01123-2	244
	Mohammad Mohsin Khan, Abhijit Dey	Selection of optimal processing condition during abrasive Wear of in-situ ZA-37/TiCp composites using MCDM technique, 47,20090-20107	2021	https://doi.org/10.1016/j.ceramint.2021.04.016	245
	Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, Bibhuti Bhushan Biswal	Processing of hardened steel by MQL technique using nano cutting fluids, 36, 316-328.	2021	https://doi.org/10.1080/10426914.2020.1832688	246

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Manoj Kumar	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Possible utilization of waste tyre as a potential energy source: A short review”, Journal of Biofuels, Vol. 12, pp. 1-9	March, 2021	http://dx.doi.org/10.5958/0976-4763.2021.00003.9	247
	Ravi Kant Ravi, Mukesh Kumar, Manoj Kumar, and R.P. Saini	Experimental investigation on heat transfer and fluid flow characteristics for roughened counter flow solar air collector”, International Journal of Green Energy (Taylor & Francis), vol.19(8), pp. 865-878	September, 2021	https://doi.org/10.1080/15435075.2021.1969938	248
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Application of pyrolysis and hydrothermal liquefaction process to convert biofuel from biomass” Journal of Physics: conference series	November, 2021	doi:10.1088/1742-6596/2062/1/012029	249
	Manoj Kumar, Neeraj Mehla, Shobhit Srivastava and Ravi Kant Ravi	Water generation from atmospheric air by using desiccant materials- nature-based solution- a review”, World Journal of Engineering, vol. 20(5), pp. 956-973	May 2022	https://doi.org/10.1108/WJE-07-2021-0420	250
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effect of injection timing of waste plastic oil and its blend on CRDI diesel engine”, International Journal of Engine Research,	September, 2022	https://doi.org/10.1177/14680874221119131	251
	Chandan Swaroop Meena, Amit Nandan Prajapati, Ashwani Kumar and Manoj Kumar	Utilization of solar energy for water heating application to improve building energy efficiency: An Experimental Study”, Buildings (MDPI), vol. 12(12), pp. 2166	December, 2022	https://doi.org/10.3390/buildings12122166	252
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	A comprehensive review on the production of alternative fuel through medical plastic waste”, Journal of Sustainable Technologies and Assessments, Vol.55 pp.102924	February 2023	https://doi.org/10.1016/j.seta.2022.102924	253
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effective utilization of waste plastic derived fuel in CI engine using multi objective optimization through RSM, FuelO, Volume 355.	1 January 2024	10.1016/j.fuel.2023.129448	254

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Sandeep Rathee	Manu Srivastava, Sandeep Rathee, Vivek Patel, Atul Kumar, Praveennath G Koppad	A review of various materials for additive manufacturing: Recent trends and processing issues	2022	https://doi.org/10.1016/j.jmrt.2022.10.015	255
	Manu Srivastava, Sandeep Rathee, Ankit Tiwari, Mehul Dongre	Wire arc additive manufacturing of metals: A review on processes, materials and their behaviour	2023	https://doi.org/10.1016/j.matchemphys.2022.126988	256
	Ashish Yadav, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Investigation of bead morphology and mechanical behaviour for metal inert gas welding-based WAAM in pulsed mode metal transfer on 316LSi stainless steel	2023	https://doi.org/10.1080/01694243.2023.2241642	257
	Ashish Yadav, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Functionally graded deposition of dissimilar steel (316LSi and ER70S-6) fabricated through twin-wire arc additive manufacturing	2024	https://doi.org/10.1016/j.matlet.2023.135395	258
	Shazman Nabi, Sandeep Rathee, Manu Srivastava	Friction and wear analysis of Al-5052/NiTi surface composites fabricated via friction stir processing	2024	https://doi.org/10.1016/j.triboint.2023.109179	259
	Shazman Nabi, Sandeep Rathee, MF Wani, Manu Srivastava	Effect of multiple passes on the properties of Al-5052/SiC surface composites fabricated via friction stir processing	2024	https://doi.org/10.1016/j.matchemphys.2023.128819	260
	Manu Srivastava, Nasir Khan, Shazman Nabi, Sandeep Rathee	Microstructure and Mechanical Properties of Friction Stir Welded Al–Mg–Si Alloys Under Variable Parameter Conditions	2023	http://doi.org/10.1007/s40033-023-00511-9	261
	Shazman Nabi, Sandeep Rathee, MF Wani, Manu Srivastava	Al-5052/SiC + CeO2 hybrid surface composites: Achieving improved microstructural and mechanical behaviour via friction stir processing	2024	https://doi.org/10.1016/j.matlet.2024.136048	262
	Pushkal Badoniya, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Parametric investigation on wire arc additive manufacturing of ER70S-6 low-carbon steel for fabrication of thick-walled parts	2023	https://doi.org/10.1080/01694243.2023.2275823	263
	Farooz Ahmad Najar, Sandeep Rathee, Manu Srivastava, Ashish Yadav	Tribological and Corrosion Behaviour of Al-Mg-CeO2 metal matrix surface composite	2024	https://doi.org/10.1016/j.triboint.2024.109508	264
	Ashish Yadav, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Microstructure transformations and improving wear resistance of austenitic stainless steel additively fabricated by arc-based DED process	2024	https://doi.org/10.1016/j.dt.2024.02.006	265
	Sandeep Rathee, M Srivastava “Book Titled Wire Arc Additive Manufacturing: Fundamental Science and Advancements 2023 CRC Press, Taylor & Francis Group”
	S.Nabi, M.F wani, Sandeep Rathee, M Srivastava,	Wire Arc Additive Manufacturing through GMAW Route	2023	Book Chapter	266
	B Kumar, SA Nazir, Sandeep Rathee, M Srivastava,	Wire Arc Additive Manufacturing of Non-ferrous Alloys	2023	Book Chapter	267
	Book Titled “Friction Stir Welding and Processing: Fundamentals to Advancements Sandeep Rathee, M Srivastava, J P Davim” publisher Wiley 2023
	F Najar, Sandeep Rathee, M Srivastava, S.Nabi	Friction Stir Welding: An Overview, in the book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter	268
	A Kumar, D Flouria M Srivastava, Sandeep Rathee,	Fundamentals of Friction Stir Processing, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter
	Sandeep Rathee ,M Srivastava, S Nabi, A Kumar	Sample Preparation and Microstructural Characterization of Friction Stir Processed Surface Composites, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter
	A Yadav, Abhignya, M Srivastava, Sandeep Rathee ,	Analysis of Friction Stir Welding Tool Using Various Threaded Pin Profiles: A Case Study, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements”	2023	Book Chapter
	A Yadav, Abhignya, M Srivastava, Sandeep Rathee ,	Static Structural and Thermal Analysis of Honeycomb Structure Fabricated by Friction Stir Process Route: A Case Study, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr.Dinesh Kumar R	Jeyaprakash N, Yang C-H, Karuppasamy SS, Rajendran DK	Correlation of microstructural with corrosion behaviour of Ti-6Al-4V specimens developed through selective laser melting technique. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2022;236(5):2240-2251	2022	doi:10.1177/09544089221087823	269
	A Karpagarak Dinesh kumar Rajendran	Effect of GTAW process parameters on joining stainless steel 316L	2022	https://doi.org/10.1063/5.0095789	270
	Rajagopal, V., Rajendran, D. & Muthukumaran, S.	Parametric, Mechanical and Metallurgical Characterization of Dissimilar Friction Stir Welded AA2014-AA2219	2024	https://doi.org/10.21203/rs.3.rs-2652119/v1	271
	Sagar M. Baligidad , Syed Abdullah , Dinesh Kumar Rajendran	Investigation on fatigue life of HAp and rGO hybrid coating on the PEEK artificial screws for dental implant	2023,	https://doi.org/10.1016/j.matchemphys.2023.128381	272
	Rajagopal, V., Rajendran, D. & Muthukumaran, S.	Multi-objective optimization and characterization of AA2219-T87 and AA6061-T6 dissimilar friction stir welded joints under the effect of copper backing using AUGMECON. Sadhana 49, 32 (2024).	2024	https://doi.org/10.1007/s12046-023-02360-4	273
	Deepak Kumar Naik, Ved Prakash Sharma, R. Dinesh Kumar	Automation in Welding Industries	2024	https://doi.org/10.1002/9781394172948.ch3	274

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Azhar Jameel	V. Gupta, Azher Jameel, S. K. Verma, S. Anand, Y. Anand	An insight on NURBS based Isogeometric Analysis, its current status and involvement in Mechanical Applications” Archives of Computational Methods in Engineering (Springer), vol. 30, pp. 1187-1230, 2023.	2023	https://doi.org/10.1007/s11831-022-09838-0	275
	A. S. Lone, Azher Jameel, G. A. Harmain	Enriched Element Free Galerkin Method for Solving Frictional Contact between Solid Bodies”, Mechanics of Advanced Materials and Structures (Taylor and Francis), Vol. 30, pp. 4227-4245, 2023.	2023	https://doi.org/10.1080/15376494.2022.2092791	276
	A. S. Lone, Azher Jameel, G. A. Harmain	Modelling of Contact Interfaces by Penalty Based Enriched Finite Element Method”, Mechanics of Advanced Materials and Structures (Taylor and Francis), Vol. 30, pp. 1485–1503, 2023	2023	10.1080/15376494.2022.2034075	277
	S. A. Kanth, A. S. Lone, Azher Jameel, G. A. Harmain	Estimation of crack tip plastic zones in presence of material irregularities by extended finite element method”, Journal of the Brazilian Society of Mechanical Sciences and Engineering (Springer), Vol. 45, pp. 340, 2023.	2023	https://doi.org/10.1007/s40430-023-04235-5	278
	A. S. Lone, S. A. Kanth, G. A. Harmain, Azher Jameel	Modelling of large sliding between contacting bodies by penalty based element free Galerkin method using node-to-segment approach”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (Springer), Vol. 01, pp. 1-18, 2023.	2023	https://doi.org/10.1007/s40997-023-00605-5	279
	S. A. Kanth, G. A. Harmain, Azher Jameel	Assessment of Fatigue Life in Presence of Different Hole Geometries by X-FEM”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (Springer), Vol. 47, pp. 1145-1159, 2023.	2023	https://doi.org/10.1007/s40997-022-00569-y	280

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr.Deepak Kumar Naik	Himadri Majumder, Akhtar Khan, Deepak Kumar Naik, Ch Sateesh Kumar	Machinability Assessment Of Shape Memory Alloy Nitinol During Wedm Operation: Application Potential Of Taguchi Based Ahp–Dfa Technique	2022	https://doi.org/10.1142/S0218625X22500020	281
Dr.Deepak Kumar Naik	Deepak Kumar Naik, Ved Prakash Sharma, R. Dinesh Kumar	Automation in Welding Industries	2024	https://doi.org/10.1002/9781394172948.ch3	282

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Ved Prakash Sharma	Ved Prakash Sharma, Naresh Varma Datla	Fracture Behavior and Reliability of Low-Silver Lead-Free Solder Joints, Journal of Electronic Packaging, ASME, https://doi.org/10.1115/1.4054096, MAR, 2022	2022	https://doi.org/10.1115/1.4054096	283
	Ved Prakash Sharma, Naresh Varma Datla	Effect of aging time and loading rate on fracture behavior of Cu/Sn-0.7Cu solder joints, Microelectronics Reliability, Elsevier, https://doi.org/10.1016/j.microrel.2021.114381, SEP, 2021	2021	https://doi.org/10.1016/j.microrel.2021.114381	284
	Ved Prakash Sharma, Naresh Varma Datla	Effect of bond-line thickness and mode-mixity on the fracture behavior and traction separation law of Sn-0.7Cu solder joints, Engineering Failure Analysis, Elsevier, https://doi.org/10.1016/j.engfailanal.2021.105855, JAN, 2022	2022	https://doi.org/10.1016/j.engfailanal.2021.105855	285
	Ved Prakash Sharma, Manoj kumar, Avadhesh Yadav, Ravi Kant Ravi, Venkateswara R. Kode	"Atmospheric Water Generation with Different Grades of Molecular Sieve" for the book titled "Highly Efficient Thermal Renewable Energy Systems: Design, Optimization, and Applications" published by Routledge (Taylor and Francis Group).	2023	Book Chapter
	Ved Prakash Sharma, Deepak Kumar, Dinesh Rajendran	"Automation in Welding Industries" for the book titled "Automation in Welding Industry: Incorporating Artificial Intelligence, Machine Learning and Other Technologies" published by Scrivener Publishing LLC (Wiley).	2024	https://doi.org/10.1002/9781394172948.ch3	286

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Mukund Dutt Sharma	S Kumar, R Sehgal, MF Wani, M.D sharma	Friction and wear properties of core-shell (CI is a core & GO is a shell) particles based magnetorheological fluid under steel on steel point contacts	2023	https://doi.org/10.1016/j.jiec.2022.11.028	287
	Sheikh Haris Mukhtar, MF Wani, M.D sharma, Rakesh Sehgal	Nano-mechanical and nano-tribological characterisation of self-lubricating MoS2 nano-structured coating for space applications	2023	https://doi.org/10.1016/j.triboint.2022.108017	288
	Rakesh Sehgal, Neeraj Gupta, Anuradha Tomar, Vigna Kumaran, M.D sharma	Smart Electrical and Mechanical Systems: An Application of Artificial Intelligence and Machine Learning	2022	Academic Press	289
	Sanjay Kumar, Rakesh Sehgal, MF Wani, M.D sharma	Stabilization and tribological properties of magnetorheological (MR) fluids: A review	2021	https://doi.org/10.1016/j.jmmm.2021.168295	290
	A Awasthi, N Panwar, M Pant, S Bala, A Chauhan, M.D sharma	Characterization, Fabrication and Dry Sliding Wear Analysis of Hybrid Aluminium 6061 Composite	2021	10.24874/ti.1012.11.20.03	291
	Sanjay Kumar, Rakesh Sehgal, MF Wani, M.D sharma	Magnetorheological study of core− shell structured carbonyl iron/2-D graphene oxide microparticles suspensions with improved sedimentation stability	2023	https://doi.org/10.1016/j.jmmm.2023.170852	292
	Tahir Ahmad Dar, Sanjay Kumar, Rakesh Sehgal, M.F. Wani, M.D sharma, Umida Ziyamukhamedova	Next-generation ecofriendly MR fluid: Hybrid GO/ Fe2O3 encapsulated carbonyl iron microparticles with improved magnetorheological, tribological, and corrosion resistance properties	2023	https://doi.org/10.1016/j.carbon.2023.118331	293
	Safoora Shabir, M.D sharma	Surface Modification of Ti3Al2.5V Titanium Alloy Using Laser Texturing With Improved Wettability, Corrosion and Bioactivity Behaviour	2024	10.1007/s12666-023-03203-w	294
	Sanjay Kumar, Bharat Kumar, Rishabh Sehgal, MF Wani, et al.	Advantages and Disadvantages of Metal Nanoparticles	2023	Book Chapter	295

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. M. Mohsin Khan	M. Abas, B., Iqbal, S., Bukhari, S., Villivalam, S., & Khan	A Retrospective of Workplace Deviance in Hospitality: A Two-tier Literature Review	2024	https://doi.org/10.1177/09722629231220990	296
	Rajesh Gangakhedkar, Mohsin Khan, M Karthik	Understanding carpooling intentions of Generation Z of India: a structural equation modeling approach	2023	https://doi.org/10.1080/03081060.2023.2294342	297
	Mohsin Khan, Rajeesh Viswanathan	Effectiveness of online teaching and learning in Indian universities during the COVID-19 pandemic	2023	https://doi.org/10.1108/IJEM-09-2020-0441	298
	M. Khan, M. and Goli	Online learning: predicting student engagement and continued intention	2023	https://doi.org/10.1504/IJLT.2023.135904	299
	Mohsin Khan, Rampalli Prabhakara Raya, Rajeesh Viswanathan	Enhancing employee innovativeness and job performance through a culture of workplace innovation	2022	https://doi.org/10.1108/IJPPM-09-2020-0466	300
	Mahendar Goli, Mohsin Khan	Behavioural intention to use social networking mobile apps: the case of TikTok	2022	https://doi.org/10.1504/IJBIR.2022.125667	301
	Mohsin Khan, Abhijit dey	Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiC MMCs	2022	https://doi.org/10.1016/j.matchemphys.2021.125319	302
	Mohsin Khan, Abhijit dey	Microstructure-abrasive wear correlation of in situ ZA27/TiC composites, 48 (16), 22928-22942	2022	https://doi.org/10.1016/j.ceramint.2022.04.250	303

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. M. F.Wani	Umida Ziyamukhamedova, Shah Wasil, Sanjay Kumar, Rakesh Sehgal, M. F. Wani, Chandra Shekhar Singh, Nodirjon Tursuno, and Himanshu Shekhar Gupta,	Investigating Friction and Antiwear Characteristics of Organic and Synthetic Oils Using h-BN Nanoparticle Additives: A Tribological Study”. Lubricants 2024, 12, 27.	2024	https://doi.org/10.3390/lubricants12010027	1
	Basant Lal, Abhijit Dey and M. F. Wani,	Influence of TiCp ceramic reinforcement on Ti6Al4V alloy matrix via spark plasma sintering technique,	2024	https://doi.org/10.1080/2374068X.2024.2307304	2
	Mohammad Arif Parray, Sajad Hussain Din and MF Wani,	Enhancing machining performance of EN24 steel with CVD diamond coated tool and minimal quantity lubrication	2024	DOI 10.1088/2631-8695/ad2035	3
	Nabi, S Rathee, MF Wani, M Srivastava	Effect of multiple passes on the properties of Al-5052/SiC surface composites fabricated via friction stir processing	2024	https://doi.org/10.1016/j.matchemphys.2023.128819	4
	Nabi, S Rathee, MF Wani, M Srivastava	Al-5052/SiC+CeO2 hybrid surface composites: Achieving improved microstructural and mechanical behaviour via friction stir processing,	2024	https://doi.org/10.1016/j.matlet.2024.136048	5
	Parray, Mohammad Arif, and Sajad Hussain Din and M F Wani	Enhancing machining performance of EN24 steel with CVD diamond coated tool and minimal quantity lubrication	2024	DOI 10.1088/2631-8695/ad2035.	6
	Sanjay Kumar, Rakesh Sehgal, M.F. Wani, Mukund Dutt Sharma, Umida Ziyamukhamedova, Tahir Ahmad Dar	Next-generation ecofriendly MR fluid: Hybrid GO/Fe2O3 encapsulated carbonyl iron microparticles with improved magnetorheological, tribological, and corrosion resistance properties	2023	https://doi.org/10.1016/j.carbon.2023.118331	7
	Sanjay Kumar, Rakesh Sehgal, M.F. Wani, Mukund Dutt Sharma	Friction and wear properties of core-shell (CI is a core & GO is a shell) particles based magnetorheological fluid under steel on steel point contacts	2023	https://doi.org/10.1016/j.jiec.2022.11.028.	8
	Bishit, C, Wani, M.F. and Sehgal Rakesh	Fabrication and self-lubricating tribological characterization of Cu-Ni/TiC/CaF2 composite for railway switch slide baseplate.	2023	https://doi.org/10.1016/j.wear.2023.204890	9
	Bishit, C, Wani, M.F. and Sehgal Rakesh	Effect of CaF2 nanoparticles on the microstructure evolution, mechanical properties and tribological behaviour of Cu-Ni alloy/cBN self-lubricating composites	2023	https://doi.org/10.1016/j.triboint.2023.108884	10
	Qu Ain, MF Wani, R Sehgal, MK Singh	Insights into nanomechanical and nanotribological characterization of cross-linked polymer nanocomposites via molecular dynamics simulation.	2023		11
	S.H.Mukhtar , Ahraf Gulzar, Shahid Saleem , M.F. Wani , Rakesh Sehgal a, A.A. Yakovenko b, I.G. Goryacheva, Mukund Dutt Sharma	Advances in Development of Solid Lubricating MoS2 Coatings for Space Applications: A Review of Modeling and Experimental Approaches	2023	, https://doi.org/10.1016/j.triboint.2023.109194	12
	S Kumar, R Sehgal, MF Wani, MD Sharma	Magnetorheological study of core− shell structured carbonyl iron/2-D graphene oxide microparticles suspensions with improved sedimentation stability,	2023	https://doi.org/10.1016/j.jmmm.2023.170852.	13
	Himanshu Shekhar Gupta, Rakesh Sehgal, Mohammad Farooq Wani	Energy sources, part a: recovery, utilization, and environmental effects investigating the effect of GnP, ZnO, and CuO nanoparticles on the tribological, rheological, and corrosion behavior of bio-based mahua oil	2023	http://dx.doi.org/10.1080/15567036.2023.2231386	14
	Akshay Balachandran, Irfan Majeed Bhat, Ruheena Tabasum, Ghulam Mohd, Mohammad Farooq Wani, Kowsar Majid, Malik Wahid, Saifullah Lone	Transfer-Printed Environmental-Friendly Anisotropic Filter with Laser-Controlled Micropores for Efficient Oil/Water Separation	2023	https://doi.org/10.1021/acsapm.3c00063	15
	TA Mufti, Shazia Gul Jan, M F Wani, R Sehgal	Development, Mechanical Characterization and High Temperature Tribological Evaluation of Magnetron Sputtered Novel MoS2-CaF2-Ag Coating for Aerospace Applications.	2023	https://doi.org/10.1016/j.triboint.2023.108374.	16
	Umida Ziyamukhamedova, M F Wani, Nodir Tursunov	Investigating Friction and Antiwear Characteristics of Organic and Synthetic Oils using h-BN Nanoparticle Additives	2023		17
	S Bashir, MJ Khan, M. F Wani, SS Saleem, MM John, QJ Ashraf, T Nissar	‘Extreme pressure properties of garlic oil: comparative investigations with PAO4 base oil and PAO/garlic oil blend	2023	DOI 10.1088/2631-8695/acb5e2	18
	Bharat Kumar, Shahid Saleem, M. F. Wani, Rakesh Sehgal, Sanjay Kumar	Influence of Nano-Lubrication on Tribological Behavior of AZ91 Magnesium Alloy Under Fretting Condition	2023	DOI: 10.24874/ti.1426.12.22	19
	Sanjay Kumar, Bharat Kumar, Rishabh Sehgal, MF Wani, Deepak Kumar, Mukund Dutt Sharma, Vivek Singh, Rakesh Sehgal, Vijay Kumar,	Nanoparticles Reinforced Metal Nanocomposites: Mechanical Performance and Durability	2023		20
	M. F. Wani, Umida Ziyamukhamedova, Taseer A. Mufti1, Rakesh Sehgal, and Sheikh S. Saleem	Design, fabrication and characterization of MoS2 self-lubricating pure MoS2 Coatings for space applications using PVD magnetron sputtering	2023	Doi.org/10.1051/e3sconf/202340105084	21
	M. F. Wani, Umida Ziyamukhamedova, Taseer A. Mufti, Rakesh Sehgal, and Sheikh S. Saleem	Fabrication and characterization of RF magnetron sputtered composite MoS2 and ZrN coatings on Ti3SiC2 max phase for space applications.	2023	Doi.org/10.1051/e3sconf/202340105084	22
	Singh, M F Wani, M M Wani	A comparative investigation on tribological properties of piston ring / cylinder liner tribo-pair using GNP and GNF dispersed lubricants Order a copy of this article,	2022	DOI: 10.1504/IJSURFSE.2022.10051381	23
	S, Haris, M F Wani, R. Sehgal, M. D. Sharma	Nano-Mechanical and Nano-Tribological Characterization of Self-Lubricating MoS2 Nano-Structured Coating for Space Applications	2022	https://doi.org/10.1016/j.triboint.2022.108017	24
	P D Shriviyas, M F Wani, R. Sehgal, C S Bishat, M. S. Charoo, A Raina	Synergetic effect of surface texturing and graphene nanoplatelets on the tribological properties of hybrid self-lubricating composite.	2022	https://doi.org/10.1016/j.triboint.2022.107434	25
	G Khajuria, M F Wani, M J Mir	Impact of Micro-Indentation on Hardness and Indentation Depth of Ni-Cr Super Alloys	2022	https://doi.org/10.1080/2374068X.2022.2091841	26
	PD Srivyas, MS Charoo, M F Wani,R Sehgal, A Raina, MIU Haq,	Impact of surface texturing on the tribological behaviour of aluminium-silicon (Al-Si/Al2O3) advanced composite under dry and lubricating conditions	2022		27
	Kumar Parveen, Jibin Philip, M F Wani, Rai Himanshu, Vashishtha Himanshu, Kumar Deepak	Study of Tribological Properties of EN8 Steel against Inconel X-750 Alloy under Dry and Lubricated Conditions,	2022	ttps://doi.org/10.1007/s12666-022-02787-z.	28
	HS Gupta, R Sehgal, M F Wani	Tribological characterization of eco-friendly bio-based mahua and flaxseed oil through nanoparticles	2022		29
	M F Wani, A Chartfi, R Aziz, M Kharrat, S Rakesh	Tribological behaviour of nano-sized beta phase silicon nitride: Effects of the contact conditions	2022	https://doi.org/10.1515/ijmr-2021-8685	30
	B Lal, A Dey, M F Wani	Effect of mechanically mixed layers during dry sliding contact of Ti6Al4V alloys at high temperature in Vacuum condition	2022	https://doi.org/10.1142/S0218625X2250127X	31
	B Lal, A Dey, M F Wani	Influence of Temperature and Applied Load on Adhesion and Abrasion Wear Characteristics of Ti6Al4V Alloy	2022	DOI: 10.4018/IJSEIMS.302234	32
	Singh G, Wani MF, Wani MM	Fuel energy Saving in SI engines using Graphene and Graphite as Nano additive: A comparative study.	2021	https://doi.org/10.1007/s13204-021-02298-1	33
	Wani M F, Kharrat M, Sehgal R	Friction and wear characterization of nanocomposites based on Si3N4 reinforced with SiC, Mo, MoSi2 nano-particles.	2021		34
	B Lal, A Dey, M F Wani,	Prediction of Surface Roughness During Dry Sliding Wear: Characteristics of Ti-6Al-4V Alloys.	2021	.DOI: 10.4018/IJSEIMS.2022010104	35
	Md Al-Amin Ahmad, MA Rani, T VV N Rao, M Danish, A b Mahfouz, R P Parameswari, M F Wani	Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process	2021	https:// doi.org/10.1016/j.matchemphys. 2021.125320	36
	Singh G, Wani MF, Wani MM.	Tribological evaluation of piston ring/cylinder liner assembly in automotive engines using GNP as a lubricant additive	2021		37
	Banday S, Wani, M. F.	Adhesion Strength and Tribological Property of Self-lubricating Si/MoS2 Nanocoating by Pulsed Laser Deposition Method.	2021	; https:// doi.org/10.1016/ j.ceramint. 2021.09.068	38
	Singh G, Wani MF, Wani MM	A Comparative Investigation on Tribological Properties Of Piston Ring/Cylinder Liner Tribo-Pair Using GNP and GNF Dispersed Lubricants.	2021		39
	Singh G, Wani MF, Wani MM	An Experimental Study on Fuel Energy Saving in Gasoline Engines Using GNP as a Lubricant Additive	2021		40
	Kumar S, Sehgal R, Wani MF, Sharma MD	Stabilization and Tribological Properties of Magnetorheological (MR) Fluids: A Review.	2021	. https://doi.org/10.1016/j.jmmm.2021.168295	41

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. G.A. Harmain	Showkat Ahmad Kanth, Aazim Shafi Lone, GA Harmain, Azher Jameel,	“Estimation of crack tip plastic zones in presence of material irregularities by extended finite element method”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer Berlin Heidelberg.	2023	https://doi.org/10.1007/s40430-023-04235-5	42
	Hemant Kumar, Rismaya Kumar Mishra, Ghulam Ashraf Ul Harmain,	“Effect of mating material on wear behaviour of Nibased hardface coating”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications.	2023	https://doi.org/10.1177/14644207231190492	43
	Chandra Kant, Gulam Ashraf Ul Harmain,	“Effect of cold working on mechanical properties of pure-304L stainless steel with variable temperature-an experimental study”, Advances in Materials and Processing Technologies.	2023	doi.org/10.1080/2374068X.2023.2199228	44
	Aazim Shafi Lone, G A Harmain, Azher Jameel,	“Modeling of contact interfaces by penalty based enriched finite element method”, Mechanics of Advanced Materials and Structures, Taylor and Francis.	2022	doi.org/10.1080/15376494.2022.2034075	45
	Aazim Shafi Lone, GA Harmain, Azher Jameel,	“Modeling of Large Sliding Between Contacting Bodies by Penalty-Based Element-Free Galerkin Method Using Node-to-Segment Approach”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering.	2023	doi.org/10.1007/s40997-023-00605-5	46
	Deepak Kumar, GA Harmain, Gaurav Gaurav, KP Lijesh, Basil Kuriachen, Harish Hirani, Jibin T Philip,	“A Novel Seal Design to Enhance MR Brake Performance”, Transactions of the Indian Institute of Metals.	2022	10.1007/s12666-022-02848-3	47
	Showkat Ahmad Kanth, GA Harmain, Azher Jameel,	“Assessment of Fatigue Life in Presence of Different Hole Geometries by X-FEM”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Springer International Publishing,	2022	10.1007/s40997-022-00569-y	48
	Ashutosh Kumar, GA Harmain,	“A Study on Fatigue Life Assessment of Alloy 718 as a Function of Load Ratio in Conjunction with Newman’s Model”, Transactions of the Indian Institute of Metals,	2022	10.1007/s12666-022-02812-1	49
	Showkat Ahmad Kanth, G.A Harmain, Azher Jameel,	“Investigation of fatigue crack growth in engineering components containing different types of material irregularities by XFEM”, Mechanics of Advanced Materials and Structures, Taylor and Francis.	2021	doi.org/10.1080/15376494.2021.1907003	50
	Rismaya Kumar Mishra, Hemant Kumar, G.A Harmain, Shaju, K Albert,	“Comparative wear behaviour of Ni-Cr-B-Si hardface coatings made by cold metal transfer and plasma transfer Arc welding processes”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.	2022		51
	G. A. Harmain, Aazim Shafi Lone, Azher Jameel,	“Enriched element free Galerkin method for solving frictional contact between solid bodies”, Mechanics of Advanced Materials and Structures, Taylor and Francis,	2022	doi.org/10.1080/15376494.2022.2092791	52
	Ishfaq Amin Maekai, G.A. Harmain,	“Resistance to slurry erosion by WC-10Co-4Cr and Cr3C2− 25 (Ni20Cr) coaOngs deposited by HVOF stainless steel F6NM”, International Journal of Refractory Metals and Hard Materials, 2022,	2022	doi.org/10.1016/j.ijrmhm.2022.105830	53
	G. A. Harmain, Aazim Shafi Lone, Azher Jameel,	“Modeling of contact interfaces by penalty based enriched finite element method”, Mechanics of Advanced Materials and Structures, Taylor and Francis,	2022	10.1080/15376494.2022.2034075	54
	Chandan, G. A. Harmain,	“Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740H”, International Journal of Pressure Vessels and Piping, Elsevier, Sept 2021.,	2021	doi.org/10.1016/j.ijpvp.2021.104551	55
	Mohammad Zehab Ud Din, G. A. Harmain,	“An Assessment of Sediment Erosion on Pelton Buckets using CFD”, Hydro Power and Dams, 2021.	2021	https://doi.org/10.1177/14644207221103517	56
	Rishmaya, G. A. Harmain,	“Wear Performance of Ni-Cr-B-Si Hard-face Coatings Fabricated by Cold Metal Transfer Welding”, Part C: Journal of Mechanical Engineering Science.2021,	2021	10.1177/09544062211023085	57
	Showkat Ahmad Kanth, G.A. Harmain, Azher Jameel,	“Investigation of fatigue crack growth in engineering components containing different types of material irregularities by XFEM”, Mechanics of Advanced Materials and Structures, Taylor & Francis, 2021,	2021	10.1080/15376494.2021.1907003	58
	Chandra Kant, G. A. Harmain,	“A Model Based Study of Fatigue Life Prediction for Multifarious Loadings”, Key Engineering Materials”, Trans Tech Publications Ltd, 2021,	2021	10.4028/www.scientific.net/KEM.882.296	59
	Ishfaq Amin Maekai, G.A. Harmain,	“An assessment of erosive wear of hydro-turbine steel using statistical modeling and optimization”, International Journal of Surface Science and Engineering, July 2021,	2021	10.24874/ti.780.10.19.02	60
	Chandra Kant, G. A. Harmain,	“Fatigue Life Prediction under Interspersed Over-load in Constant Amplitude Loading Spectrum via Crack Closure and Plastic Zone Interaction Models - A Comparative Study”, 9 th International Conference on Fracture, Fatigue and Wear, FFW 2021,	2nd – 3rd August 2021		61
	Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani,	“A study on machinability of heat-treated Inconel 718 using Ceramic inserts”, IEEE Sponsored International Conference on Emerging Trends in Industry 4.0, OP Jindal University, Raigarh, Chhattisgarh, India,	19-21 May, 2021.		62
	Chandra Kant & G. A. Harmain	“Fatigue Life Prediction Under Interspersed Overload in Constant Amplitude Loading Spectrum via Crack Closure and Plastic Zone Interaction Models—A Comparative Study”, Proceedings of the 9th International Conference on Fracture, Fatigue and Wear, Springer,	2022	10.1007/978-981-16-8810-2_18, ISBN: 978-981-16- 8809, 253 – 260, 2022	63
	Chandra Kant & G. A. Harmain,	“Analysis of Single Overload Effect on Fatigue Crack Propagation Using Modified Virtual Crack Annealing Model”, Recent Development in Mechanics and Design, Springer,	2022	10.1007/978-981-19-4140-5_1, ISBN: 978-981- 19-4139-9, 1 – 8, 2022	64
	Malik Parvez, G. A. Harmain, Jaleel Khan,	“Flow Characteristics of Power Law Fluid Around Circular Cylinder”, Recent Advances in Mechanical Engineering, Springer,	2022	ISBN: 978-981-19-2188-9, 225 – 236, 2022.	65
	Raj Kumar, Mohammad Mursaleen, GA Harmain, Ashutosh Kumar,	“A Critical Review of Fatigue Life Prediction on 316LN SS”, Advances in Modelling and Optimization of Manufacturing and Industrial Systems pp 427–440	2023		66

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. Adnan Qayoum	Bisma Ali, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir	Effect of graphene/hydrofluoroether (HFE-7100) nanofluids on start-up and thermal characteristics of pulsating heat pipe	2023	https://doi.org/10.1007/s10973-022-11929-w	67
	Amir Yousuf Bhat, Adnan Qayoum	Synergistic impact of tube configuration and working fluid on photovoltaic-thermal system performance	2023	https://doi.org/10.1016/j.renene.2023.02.086	68
	Mohammad Kamran, Adnan Qayoum	Experimental investigation of natural convection of Fe3O4-water nanofluid in a cubic cavity	2023	https://doi.org/10.1080/01932691.2023.2173607	69
	Amir Yousuf Bhat, Adnan Qayoum	Performance enhancement of Photovoltaic-thermal system using hybrid tubes: An assessment of thermodynamic and thermohydraulic efficiencies	2023	https://doi.org/10.1016/j.applthermaleng.2023.120652	70
	Bisma ALI, Adnan QAYOUM, Shahid SALEEM, Fasil Qayoum MIR	Experimental investigation of nanofluids for heat pipes used in solar photovoltaic panels	2023		71
	Mohammed DILAWAR, Adnan QAYOUM	Simulation of vapour compression air conditioning system using Al2O3 based nanofluid refrigerant	2023	https://doi.org/10.18186/thermal.1377210	72
	Mohammed Dilawar, Adnan Qayoum	Performance analysis of R290/R600a–Al2O3 mixtures in household refrigerator	2023	https://doi.org/10.1007/s12046-023-02336-4	73
	Mohammed Dilawar, Adnan Qayoum	Performance evaluation of novel refrigerant mixtures in an air conditioning system using Al2O3 nanolubricant	2023	https://doi.org/10.1007/s10973-023-12471-z	74
	Amir Yousf Sofi, Adnan Qayoum	Numerical Investigation of Thermo-Hydraulic Performance and Irreversibility Behaviour in a Pulsating Turbulent Flow Ribbed Duct	2023	https://doi.org/10.1007/s13369-023-07902-w	75
	Mohammad KAMRAN, Adnan QAYOUM	Investigation of thermo-rheological properties of Fe3O4/Ethylene glycol nanofluid in a square cavity	2023	https://doi.org/10.18186/thermal.1377221	76
	Yellu KUMAR, Adnan QAYOUM, Shahid SALEEM, Fasil QAYOUM MIR	Combined effect of upstream ramp and effusion cooling in combustion chamber liners of gas turbine	2023	DOI: 10.18186/thermal.1283203	77
	Amir Yousuf Bhat, Adnan Qayoum	Viscosity of CuO nanofluids: Experimental investigation and modelling with FFBP-ANN	2022	https://doi.org/10.1016/j.tca.2022.179267	78
	Bisma Ali, Adnan Qayoum, Shahid Saleem, F.Q Mir	Synthesis and characterization of high-quality multi layered graphene by electrochemical exfoliation of graphite	2022	http://dx.doi.org/10.17515/resm2022.384na0121	79
	Mohammad Kamran, Adnan Qayoum	Effect of ZnO nanofluids on thermo-hydraulic characteristic of flow in a heated duct	2022	https://doi.org/10.1080/15567036.2022.2154871	80
	Masrat Bashir, Adnan Qayoum, Sheikh Shahid Saleem	Effect of banana peel powder on the fade and recovery of brake friction material	2022	https://doi.org/10.1007/s11837-022-05223-1	81
	Mohammed Dilawar, Adnan Qayoum	Performance study of aluminium oxide based nanorefrigerant in an air-conditioning system	2022	http://dx.doi.org/10.17515/resm2022.459ma0701	82
	Amir Yousf Sofi, Adnan Qayoum	Heat Transfer and Fluid Flow Characteristics in a Two Pass Duct with Variable Rib Shapes: A CFD Analysis	2022	https://doi.org/10.1007/978-981-99-6343-0_35	83
	Amir Yousuf Bhat, Adnan Qayoum	Thermohydraulic Performance of a Photovoltaic Thermal System Using CuO/EG Nanofluid	2022	https://doi.org/10.1007/978-981-99-7047-6_8	84
	K R Yellu Kumar, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir	Effect of blowing ratio on adiabatic effectiveness for effusion cooling in gas turbine combustor liners	2022	http://dx.doi.org/10.17515/resm2022.359me1028	85
	Ayaz Ahmed, Adnan Qayoum, Fasil Qayoom Mir	Spectroscopic studies of renewable insulation materials for energy saving in building sector	2021	https://doi.org/10.1016/j.jobe.2021.103300	86

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. N. A. Sheikh	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Erosion Behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 Coated Mild Steel	2023	https://doi.org/10.1007/s11665-022-07657-9	87
	Ali Imran Ansari, Nazir Ahmad Sheikh	Simulation and Experimental Assesment of acrylonitrile butadiene styrene polymer based new lattice design	2023	https://doi.org/10.1007/s40032-023-00928-x	88
	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Tribo-corrosion behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 coated mild steel	2023	https://doi.org/10.1016/j.arabjc.2023.104648	89
	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Wear and Corrosion Behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2-Coated Mild Steel	2023	https://doi.org/10.1007/s11665-023-07801-z	90
	Ali Imran Ansari, Nazir Ahmad Sheikh	Biocompatible Scaffold Based on Silk Fibroin for Tissue Engineering Applications	2023	https://doi.org/10.1007/s40032-022-00891-z	91
	S Ahmad, R House, DL Holness, R Nisenbaum, AMS Thompson	Evaluation of neurological testing for hand–arm vibration syndrome	2023	https://doi.org/10.1093/occmed/kqac137	92
	Ali Imran Ansari, Nazir Ahmad Sheikh	A Review on Different Approaches for Foam Fabrication	2023	https://doi.org/10.1007/s40032-023-00998-x	93
	Ali Imran Ansari, Nazir Ahmad Sheikh	A Review on Materials Application in Scaffold Design by Fused Deposition Method	2023	https://doi.org/10.1007/s40032-023-00988-z	94
	Ali Imran Ansari, Nazir Ahmad Sheikh, Navin Kumar	Simulation and experimental energy absorption behavior of ABS-M30i-based three distinct lattice structures fabricated by polymer 3D printer	2023	https://doi.org/10.1007/s40430-023-04428-y	95
	Ali Imran Ansari, Nazir Ahmad Sheikh, Navin Kumar	Energy-Absorbing Characteristics of an ABS-M30i-based 3D-Printed Periodic Surface and Strut-Based Lattice Structure	2023	https://doi.org/10.1007/s40032-023-00984-3	96
	Ali Imran Ansari, Nazir Ahmad Sheikh	Modeling and Simulation of Scaffolds in Varied Conditions Using CAD and Medical Images	2023	https://doi.org/10.1007/s40032-023-00960-x	97
	Ajaz Ali, Sheikh Nazir Ahmad	Effect of Temperature on Hard TiB2-Al2O3-Ti Coatings Deposited Using Electron Beam Physical Vapor Deposition	2023	https://doi.org/10.1007/s11665-022-07414-y	98
	M Chandarana, VL Sateesh, NA Sheikh, GN Dayananda	Vibration Control of a Smart Composite Plate with Damaged Substrate	2023	https://doi.org/10.1007/s42417-022-00586-w	99
	Ajaz Ali, Sheikh Nazir Ahmad	Mechanical and tribological behavior of TiB2/Al2O3 coating on high-speed steel using electron beam deposition	2022	https://doi.org/10.1016/j.triboint.2022.107681	100
	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Corrosion behaviour OF HVOF deposited Zn–Ni–Cu and Zn–Ni–Cu–TiB2 coatings on mild 102steel	2022	https://doi.org/10.1515/corrrev-2021-0082	101
	Ali Imran Ansari, Nazir Ahmad Sheikh	A Review of Bone Regeneration Mechanisms and Bone Scaffold Fabrication Techniques (Conventional and Non-Conventional)	2022	https://doi.org/10.1007/s40032-022-00880-2	102
	Ali Imran Ansari, Nazir Ahmad Sheikh	Bone Tissue Regeneration: Rapid Prototyping Technology in Scaffold Design	2022	https://doi.org/10.1007/s40032-022-00872-2	103
	Yunis Ahmad Dar, Nazir Ahmad Sheikh	A review of fabrication and properties of spark plasma sintered tungsten carbide based advanced composites	2022	https://doi.org/10.1177/09544089211051590	104
	Kaleem Ahmad Najar, Sheikh Nazir Ahmad, MA Shah, Zahid Mushtaq, Sobura Altaf	A dual-layer approach for enhancing the tribological and machining performance of carbide tools in dry turning of mild-steel alloy	2022	https://doi.org/10.1504/IJMMM.2022.122784	105
	Ansari Ali Imran Habib, Nazir Ahmad Sheikh	3D printing review in numerous applications for dentistry	2022	https://doi.org/10.1007/s40032-022-00810-2	106
	Rizwan Ul Haq, Umashankar Kumar, Naveen Kumar, Yash Baranwal, Mohd Mursaleen, Nazir Ahmad Sheikh	Design and manufacturing of low cost SCARA robot	2021		107

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. M.M. Wani	Singh G, Wani MF, Wani MM	A comparative investigation on tribological properties of piston ring / cylinder liner tribo-pair using GNP and GNF dispersed lubricants Order a copy of this article,	2022	DOI: 10.1504/IJSURFSE.2022.10051381	108
	Singh G, Wani MF, Wani MM	Fuel energy Saving in SI engines using Graphene and Graphite as Nano additive: A comparative study.	2021	https://doi.org/10.1007/s13204-021-02298-1	109
	Singh G, Wani MF, Wani MM	Tribological evaluation of piston/cylinder linear assembly in automotive engines using GNP as a lubricant additive	2021		110
	Singh G, Wani MF, Wani MM	An Experimental Study on Fuel Energy Saving in Gasoline Engines Using GNP as a Lubricant Additive	2021	https://doi.org/10.1177/14680874211039688	111

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. Babar Ahmad	Tariq Ahmad, Noor Zaman Khan, Arshad Noor Siddiquee, Babar Ahmad	Investigations on surface properties and surface morphology in dissimilar joining of WE43 and AA-7075 alloy	2024	https://doi.org/10.1016/j.triboint.2024.109302	112
	Mohammad Ashraf Mir, Sheikh Shahid Ul Islam, Noor Zaman Khan, Babar Ahmad, Arshad Noor Siddiquee	Effect of processing parameters on microstructure and tensile strength of stainless steel	2024		113
	Shahid Manzoor wani,Babar Ahmad,Sheikh Shahid Saleem	Nano-mechanical and nano-tribological characterization of Ni-Co-BN nano-composite coating for bearing applications	2023	https://doi.org/10.1016/j.triboint.2023.108281	114
	Omar Hussain, Babar Ahmad, Sheikh Shahid Saleem	Biomaterials for artificial knee joint replacement: a review	2023	https://doi.org/10.1504/IJMATEI.2023.130129	115
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad, Vinayak Malik	Effect of process parameters on surface composite fabrication of newly commercialized Mg-ZE41 alloy by friction stir processing (FSP): microstructural development and microhardness	2023		116
	Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem	Nanomechanical and Nanotribological Characterization of Co-BN Nano-composite Coating on Al-Si Substrate	2023		117
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Mechanical, Wear, and Corrosion Properties Investigation of ZE41/TiB2 Surface Composites Fabricated by Friction Stir Processing	2022	https://doi.org/10.1115/1.4054872	118
	Suhail Ganiny, Majid H Koul, Babar Ahmad	Analysis of Limit Cycle Oscillations in Dual-rate Haptic Rendering: Effect of Dual-rate Sampling	2022	https://doi.org/10.1016/j.ifacol.2022.04.107	119
	Suhail Ganiny, Majid H Koul, Babar Ahmad	Identification of the most conservative stability bounds for a class of multi-rate haptics controllers	2022	https://doi.org/10.1504/IJMIC.2022.128311	120
	SA Manroo, NZ Khan, B Ahmad	Study on surface modification and fabrication of surface composites of magnesium alloys by friction stir processing: a review	2022		121
	Omar Hussain, Babar Ahmad, Shahid Saleem	Analysis of tribological behavior of medical-grade UHMW polyethylene under dry and lubricated conditions with human body fluids using Taguchi and GRA techniques	2022	https://doi.org/10.1177/0892705720941907	122
	Diyan ul Imaan, Fasil Qayoom Mir, Babar Ahmad	In-situ preparation of PSSA functionalized ZWP/sulfonated PVDF composite electrolyte as proton exchange membrane for DMFC applications	2022	https://doi.org/10.1016/j.ijhydene.2021.12.199	123
	Omar Hussain, Shahid Saleem Sheikh, Babar Ahmad	Fabrication and tribological behavior of novel UHMWPE/vitamin-C/graphene nanoplatelets based hybrid composite for joint replacement	2022		124
	Suhail Ahmed, Manroo, Vinayak Malik, Babar Ahmad	Surface moderation and composite fabrication of die-cast magnesium alloys via friction stir processing: a review	2022	https://doi.org/10.1080/2374068X.2021.1970998	125
	Omar Hussain, Babar Ahmad, Shahid Saleem Sheikh	Biotribological performance of medical-grade UHMW polyethylene-based hybrid composite for joint replacement	2021	https://doi.org/10.1177/09673911211058088	126
	Suhail Ganiny, Majid H Koul, Babar Ahmad	Time-delayed dual-rate haptic rendering: stability analysis and reduced order modeling	2021		127

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Mohammad Hanief	Mohammad Hanief, Hashim Khursheed, M.s. Charoo, M.Zubair	Investigation of Lubrication Characteristics of virgin and additive blended Jatropha based grease	25/09/2023	DOI: 10.24874/ti.1471.04.23.09	128
	M. Hanief*, K. Zaman, S. Ul Bashir, J. Showkat, M. Zubair	Investigation on cypress wood membrane for water filtration	Jan 2022	DOI: 10.34049/bcc.53.D.10	129
	Asaf Hanief Kohli, M Hanief, Vishal Jagota	A retrospection of the effect of nitriding processes on the AISI H13 tool steel	Apr 2023	https://doi.org/10.1080/2374068X.2022.2093012	130
	Zahid Maqbool, M.hanief , Malik Parveez	Review on performance enhancement of phase change material based heat sinks in conjugation with thermal condultivity enhancers for electronic cooling	2023	https://doi.org/10.1016/j.est.2022.106591	131
	Mir Mohsin John, M. Hanief	Frictional noise mitigation using synergetic approach of laser surface texturing and bio-lubrication	2022	https://doi.org/10.1016/j.triboint.2022.108056	132
	Mir Mohsin John, M. Hanief,Suhail ganiny	Predictive modelling of pump noise using multi-linear regression and random-forest models - via optimal data splitting	January 11, 2023	https://doi.org/10.1504/IJSPM.2022.128274	133
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Experimental assessment of recycling methods of used engine oil for sustainable environment	10 May 2022	http://dx.doi.org/10.17515/resm2022.385ma0113	134
	Zahid mushtaq, M.hanief	Tribological investigation of molybdenum disulphide nanoparticles and graphene nanoflakes as lubricant additives in Karanja oil	2022	https://doi.org/10.1504/IJSURFSE.2022.124011	135
	Zahid Maqbool, M.hanief , Malik Parveez	Effect of CuO-GnP binary mixture on thermal properties of organic PCM	Nov 2023	https://doi.org/10.1016/j.matlet.2023.135118	136
	Zahid Maqbool, M.hanief ,	Influence of materials hardness and operating parameters on the surface roughness during reciprocating sliding	Nov 2021		137
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Condition monitoring of used engine oil by FTIR spectroscopy- A Review	Dec 2021		138
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Critical retrospection and evaluation of waste engine oil recycling methods	2023		139
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Recycling of waste lubricating oil using ultra filtration membrane and modelling of its rehelogical behaviour using guass-newton algorithim	2023		140
	Mir Mohsin John, M. Hanief	Modeling frictional noise using artificial neural network and regression	2023		141
	Mohammad Hanief, wani khalid, Fozia Akhter, M.s. Charoo, M.Zubair	Effect of saturated fatty acids on the antiwear and rheological properties of olive oil	2023		142

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. M. S. Charoo	Pranav Dev Srivyas, MF Wani, Rakesh Sehgal, Chandra Shekhar Singh Bisht, MS Charoo, Ankush Raina, Mir Irfan Ul Haq	Synergetic effect of surface texturing and graphene nanoplatelets on the tribological properties of hybrid self-lubricating composite	2022	https://doi.org/10.1016/j.triboint.2022.107434	143
	Mehak Nisar, MS Charoo	Optimization of fretting wear parameters and effect of high temperature on fretting wear behavior of Al6061 alloy and Al6061-SiC composite	2022	https://doi.org/10.1007/s12633-021-01172-7	144
	Wani Khalid Shafi, MS Charoo	An experimental study on the effect of concentration of green nanoadditives on the tribological properties of the biolubricants	2022	https://doi.org/10.1177/09544062211042046	145
	Shariq Ahmad Bhat, MS Charoo	Rheological characteristics of coconut grease with graphene nanoplatelets	2022	https://doi.org/10.1007/s13399-021-02118-0	146
	Pranav Dev Srivyas, MS Charoo, Tanmoy Medhi, Shariq Ahmad Bhat,	Tribological behaviour of rice bran and sesame greases using h-BN and CuO particles	2023		147
	Mehak Nisar, MS Charoo	A Comparative Analysis of Corrosion Performance of Piston Alloy and Its Composite in Marine, Mining and Basic Environments	2022	https://doi.org/10.1007/s40735-022-00645-5	148
	Shariq Ahmad Bhat, MS Charoo	Rheological and tribological properties of rice bran oil grease (RBOG) with h-BN nanoparticles-An experimental study	2022		149
	Mehak Nissar M.S. Charoo, Fozia Akhter, Muhammad Hanief, Wani Khalid Shafi	Effect of Saturated Fatty Acids on the Antiwear and Rheological Properties of Olive Oil	2023	Doi;10.24874/ti.1404.11.22.02	150
	Pankaj Verma, MS Charoo, Pranav Dev Srivyas, Tanmoy Medhi	Enhanced extreme pressure and tribological performance of hybrid nano lubricant	2023	https://doi.org/10.1080/17515831.2023.2235230	151
	Mehak Nisar and Mohammad Shafi Charoo	Tribological investigations on piston alloy based hybrid nano composite and GGG40 spheroidal cast iron under reciprocating dry sliding conditions	2023	https://doi.org/10.1177/09544062231225020	152
	Shariq Ahmad Bhat, MS Charoo	Formulation and rheology of bio-grease mixed with h-BN nanoparticles	2021		153

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Saad Parvez	Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez	Friction based solid state welding–A review	2022-1-1	https://doi.org/10.1016/j.matpr.2022.01.457	154
	Fayaz Ahmad Mir, Noor Zaman Khan, Saad Parvez, Arshad Noor Siddiquee	Investigations on surface properties of friction stir welded dissimilar AA2024-T3 and 304 stainless steel joints	2024-1	https://doi.org/10.1016/j.triboint.2024.109312	155
	and Saad Parvez Fayaz Ahmad Mir, Noor Zaman Khan	Effect of tool–pin offset on microstructure, mechanical properties, and corrosion behavior of friction stir welded AA2024-T3 and SS304 dissimilar joints	2023-11	https://doi.org/10.1177/14644207231217479	156
	Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez	Joining of aluminium matrix composites using friction stir welding: A review	2022-5	https://doi.org/10.1177/14644207211069616	157

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Sheikh Shahid Saleem	Hussain, O., Ahmad, B., & Sheikh, S.	Biotribological performance of medical-grade UHMW polyethylene-based hybrid composite for joint replacement. Polymers And Polymer Composites, 29(9_suppl), S1424-S1431.	Nov 2021	https://doi.org/10.1177/09673911211058088	158
	Masrat Bashir, Adnan Qayoum and Shahid Saleem	Effect of Banana Peel Powder on the Fade and Recovery of Brake Friction Material. JOM (2022).	15-03-2022	https://doi.org/10.1007/s11837-022-05223-1	159
	K R Yellu Kumar, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir	Effect of blowing ratio on adiabatic effectiveness for effusion cooling in gas turbine combustor liners, Res. Eng. Struct. Mat., 8(3), pp. 431–445,	Mar 2022	http://dx.doi.org/10.17515/resm2022.359me1028	160
	Umair Ashraf, Shahid Saleem, Jebran Khan,	Influence of temperature on the tribo-performance of GGG-60 seat insert against 23–8 N exhaust valve steel, Materials Today: Proceedings, Volume 66, Part 2, 2022, Pages 573-579,	June 2022	https://doi.org/10.1016/j.matpr.2022.06.175	161
	Bisma Ali, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir,	Synthesis and characterization of high-quality multi layered graphene by electrochemical exfoliation of graphite, Res. Eng. Struct. Mat. 8 (3) (2022), 447-462,	2022	http://dx.doi.org /10.17515/resm2022.384na0121	162
	Ali, B., Qayoum, A., Saleem, S. et al.	Effect of graphene/hydrofluoroether (HFE-7100) nanofluids on start-up and thermal characteristics of pulsating heat pipe. J Therm Anal Calorim (2023). 148(9), pp. 3819–3834,	2023	https://doi.org/10.1007/s10973-022-11929-w	163
	Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem,	Nano-mechanical and nano-tribological characterization of Ni-Co-BN nano-composite coating for bearing applications., Tribology International, February 2023, Volume 180, 108281	February 2023	https://doi.org/10.1016/j.triboint.2023.108281.	164
	Shahnaz Bashir, Mohammad Jebran Khan, MF Wani, S Shahid Saleem, Mir Mohsin John, Qazi Junaid Ashraf, Tabin Nissar,	Extreme pressure properties of garlic oil: comparative investigations with PAO4 base oil and PAO/garlic oil blend, Engineering Research Express, 5 (2023) 015057,	2023	DOI 10.1088/2631-8695/acb5e2	165
	Kumar, Y., Qayoum, A., Saleem, S., Mir, F.Q.	Combined effect of upstream ramp and effusion cooling in combustion chamber liners of gas turbine, Journal of Thermal Engineering, 2023, 9(2), pp. 297–312.	2023	DOI 10.18186/thermal.1283203	166
	MF Wani, Umida Ziyamukhamedova, Taseer A Mufti, Rakesh Sehgal, Sheikh S Saleem	Design, fabrication and characterization of MoS2 self-lubricating pure MoS2 Coatings for space applications using PVD magnetron sputtering, E3S Web of Conferences 401, 05084 (2023),	11 July 2023	https://doi.org/10.1051/e3sconf/202340105084	167
	MF Wani, Umida Ziyamukhamedova, Taseer A Mufti, Rakesh Sehgal, Sheikh S Saleem	Fabrication and characterization of RF magnetron sputtered composite MoS2 and ZrN coatings on Ti3SiC2 max phase for space applications,E3S Web of Conferences 401, 05083 (2023),	11 July 2023	https://doi.org/10.1051/e3sconf/202340105083	168
	Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem	Nanomechanical and Nanotribological Characterization of Co-BN Nano-composite Coating on Al-Si Substrate. J. of Materi Eng and Perform (2023).	2023-9-15	https://doi.org/10.1016/j.triboint.2023.109194.	169
	Sheikh Haris Mukhtar, Ahraf Gulzar, Shahid Saleem, MF Wani, Rakesh Sehgal, AA Yakovenko, IG Goryacheva, Mukund Dutt Sharma	Advances in development of solid lubricating MoS2 coatings for space applications: A review of modeling and experimental approaches, Tribology International, Volume 192, 2024, 109194,	2023-12-14	https://doi.org/10.1016/j.triboint.2023.109194.	170
	Narayana Turali, Sheikh Shahid Saleem	Synergetic effect of oleophilic textured surfaces and MoS2 on the tribological properties of Ti-6Al-4V alloy under dry and lubricated sliding conditions, 2024, Surf. Topogr.: Metrol. Prop. 12 015008	2024-1-29	10.1088/2051-672X/ad237e	171
	Narayana Turali, Sheikh Shahid Saleem	Comparative Investigation and Characterization of The Nano-Mechanical and Tribological Behavior of RF Magnetron Sputtered TiN, CrN, and TiB2 Coating on Ti6Al4V Alloy, Tribology International, Volume 193, 2024, 109348	2024-2-1	https://doi.org/10.1016/j.triboint.2024.109348.	172
	Narayana Turali, Sheikh Shahid Saleem	Enhancing Fretting Wear Behavior of Ti64 Alloy: The Impact of Surface Textures and CrN-MoS2-Ag Composite Coating, Tribology International, Volume 193, 2024, 109346,	2024-2-1	https://doi.org/10.1016/j.triboint.2024.109346.	173

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Mohammad Mursaleen	Meruva Manikanteswara Reddy, Mohammad Sarfaraz ahanger, Shubham Sharma,Dasari Tharun,Mohammad Mursaleen	Design and analysis of composite leaf spring under static loading	2021	https://doi.org/10.21467/abstracts.108	174
	Shamas U Din Hajam and Mohammad Mursaleen	Design and Analysis of An Automotive Single Plate Friction Clutch Using Different Materials	2021	https://doi.org/10.21467/abstracts.108	175
	Mohammad Mursaleen Butt, Kaleem Ahmad Najar, Towseef Hussain Dar	Experimental evaluation of multilayered CVD- and PVD-coated carbide turning inserts in severe machining of AISI-4340 steel alloy	2021		176
	Rizwan Ul Haq, Umashankar Kumar, Naveen Kumar, Yash Baranwal, Mohd Mursaleen, Nazir Ahmad Sheikh	Design and Manufacturing of Low Cost SCARA Robot	2021		177
	Avinash,M Mursaleen,Navin Kumar	Nanomechanical properties of human hair using AFM, nanoindentation,SEM and EDX	2021		178
	Misba Jan, Mohammad Mursaleen Butt, and Mohammad Muzaffarul Hassan	Fluid flow characteristics and heat transfer performance in microchannel heat sinks: A review	2022	https://doi.org/10.1177/09544089221142436	179
	Raj Kumar, Mohammad Mursaleen, G. A. Harmain & Ashutosh Kumar	A Critical Review of Fatigue Life Prediction on 316LN SS	2023	https://doi.org/10.1007/978-981-19-6107-6_30	180

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Noor Zaman Khan	Fayaz Ahmad Mir,Noor Zaman Khan, Saad Parvez, Arshad Noor Siddiquee,	Investigations on surface properties of friction stir welded dissimilar AA2024-T3 and 304 stainless steel joints, Tribology International,Volume 193, 2024, 109312	2024	https://doi.org/10.1016/j.triboint.2024.109312.	181
	Tariq Ahmad,Noor Zaman Khan, Arshad Noor Siddiquee, Babar Ahmad,	Investigations on surface properties and surface morphology in dissimilar joining of WE43 and AA-7075 alloy, Tribology International, Volume 192, 109302 .	17-01-2024	https://doi.org/10.1016/j.triboint.2024.109302	182
	Annayath Maqbool, Noor Zaman Khan	Microstructure and corrosion behavior of thermo-mechanically processed rare earth Mg alloy: Effect of friction stir processing, Materials Letters,Volume 359,135934,	13-01-2024	https://doi.org/10.1016/j.matlet.2024.135934.	183
	Sheikh Shahid Ul Islam,Noor Zaman Khan, Mohammad Mohsin Khan, and Arshad Noor Siddiquee	Steel heat treatment: Equipment and process design. Reference Module in Materials Science and Materials Engineering, Elsevier, 2024	01-11-2024	https://doi.org/10.1016/B978-0-323-96020-5.00249-1	184
	AN Siddiquee, N Gangil, D Bajaj, SMAK Mohammed, DL Chen	Autogenous Dissimilar Welding of Copper-to-Stainless Steel via Electron Beam Welding: A Novel Strategy for Achieving Defect-Free Joints. Metall Mater Trans A 55, 635–651 (2024).	28-12-2023	https://doi.org/10.1007/s11661-023-07274-8	185
	Mohammad Owais Qidwai, Irfan Anjum Badruddin, Sarfaraz Kamangar, Mohammad Anas Khan & Mohammad Nawaz Khan	Heat transfer enhancement in multijet micropin fin heat sink, Numerical Heat Transfer, Part A: Applications, pp:1-20	27-12-2023	DOI: 10.1080/10407782.2023.2294349	186
	Mir FA, Noor Zaman Khan Siddiquee AN, Parvez S.	Effect of tool–pin offset on microstructure, mechanical properties, and corrosion behavior of friction stir welded AA2024-T3 and SS304 dissimilar joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2023;0(0).	29/11/2023	https://doi:10.1177/14644207231217479	187
	Annayath Maqbool	Fabrication and characterization of hybrid WE43 Mg alloy-based composite by friction stir processing with improved ductility, Volume 215, September 2023, 112273	09-06-2023	https://doi.org/10.1016/j.vacuum.2023.112273	188
	Mohd Rafiq Parray, , Suhail Ahmed Manroo, Annayath Maqbool	Experimental investigation on fabrication and characterisation of Mg-Al2O3 surface composites, Advances in Materials and Processing Technologies	01-04-2023	https://doi.org/10.1080/2374068X.2023.2198824	189
	Annayath Maqbool, Nadeem Fayaz Lone, Tariq Ahmad, Arshad Noor Siddiquee	Effect of hybrid reinforcement and number of passes on microstructure, mechanical and corrosion behavior of WE43 Mg alloy based metal matrix composite, Journal of Manufacturing Processes, Volume 89, 3 March 2023, Pages 170-181	02-02-2023	https://doi.org/10.1016/j.jmapro.2023.01.070	190
	Azhar Equbal, Sarfaraz Masood, Iftekhar Equbal, Shafi Ahmad, Noor Z Khan, Zahid A Khan	Artificial intelligence against COVID-19 Pandemic: A Comprehensive Insight, Current medical imaging, Volume 19, Number 1, 2023, pp. 1-18(18)	01-01-2023	https://doi.org/10.2174/1573405617666211004115208	191
	Shafi Ahmad, Sarfaraz Masood, Noor Zaman Khan, Irfan Anjum Badruddin, Ali Ahmadian, Zahid A Khan, Amil Hayat Khan	Analysing the impact of COVID-19 pandemic on the psychological health of people using fuzzy MCDM methods, Operations Research Perspectives, Volume 10, 2023, 100263	22-12-2022	https://doi.org/10.1016/j.orp.2022.100263	192
	Annayath Maqbool, Noor Zaman Khan, Arshad Noor Siddiquee, Irfan Anjum Badruddin, Mohamed Hussien, Mohammed Imran Khan	Overcoming challenges in using magnesium-based materials for industrial applications using friction-stir engineering, Materials Science and Technology, Volume 39, Issue 9	22-10-2022	https://doi.org/10.1080/02670836.2022.2158539	193
	Tariq Ahmad, Noor Zaman Khan, Mohammad Mohsin Khan, Nadeem Fayaz Lone, Arshad Noor Siddiquee, Babar Ahmad, Shafi Ahmad, Zahid A Khan, Sheikh Shahid Ul Islam	Fabrication and machinability study of Zn-Al-TiC composite using wire EDM with different dielectric media, Advances in Materials and Processing Technologies, Volume 9, 2023 - Issue 3, Pages 1340-1355	26-08-2022	https://doi.org/10.1080/2374068X.2022.2116878	194
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Mechanical, Wear, and Corrosion Properties Investigation of ZE41/TiB2 Surface Composites Fabricated by Friction Stir Processing, Journal of Manufacturing Science and Engineering, 144(11): 111010 (9 pages)	06-07-2022	https://doi.org/10.1115/1.4054872	195
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad, Vinayak Malik	Effect of process parameters on surface composite fabrication of newly commercialized Mg-ZE41 alloy by friction stir processing (FSP): microstructural development and microhardness, World Journal of Engineering, Vol. 20 No. 5, pp. 857-867.	25-04-2022	https://doi.org/10.1108/WJE-12-2021-0660	196
	Mouminah Amatullah, Mehwish Jan, Munazah Farooq, Afra Saeed Zargar, Annayath Maqbool	Effect of Tool Rotational Speed on the Friction Stir Welded Aluminum Alloys: a Review, Materials Today: Proceedings, Volume 62, Part 1, 2022, Pages 245-250	18-03-2022	https://doi.org/10.1016/j.matpr.2022.03.220	197
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Study on surface modification and fabrication of surface composites of magnesium alloys by friction stir processing: a review, Journal of Engineering and Applied Science, 69, Article number: 25 (2022)	10-03-2022	https://doi.org/10.1186/s44147-022-00073-9	198
	Lubaid Nisar, Aasif Nazir Thoker, Asma Sanjum, Mohd Rafiq Parray, Suhail Ahmed Manroo	Defects analysis in friction stir processing of magnesium-based surface composites, Materials Today: Proceedings. , 2022, Pages 158-162	09-03-2022	https://doi.org/10.1016/j.matpr.2022.02.611.	199
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Development of Nano-Composites on Rare-Earth Mg-ZE41 Alloy Via Friction Stir Processing (FSP): Microstructure, Mechanical, and Tribological Properties, JOM, Volume 74, pages 2047–2062,	04-03-2022	https://doi.org/10.1007/s11837-022-05211-5	200
	Fayaz Ahmad Mir, Arshad Noor Siddiquee, Saad Parvez	Friction based solid state welding–A review, Materials Today: Proceedings, Volume 62, Part 1, 2022, Pages 55-62	10-02-2022	https://doi.org/10.1016/j.matpr.2022.01.457	201
	Md Nadeem Alam, Arshad Noor Siddiquee, Zahid A Khan, Noor Zaman Khan	A comprehensive review on wire EDM performance evaluation, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 236, Issue 4	24-01-2022	https://doi.org/10.1177/09544089221074843	202
	Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez	Joining of aluminium matrix composites using friction stir welding: A review, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Volume 236, Issue 5	19-01-2022	https://doi.org/10.1177/14644207211069616	203
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Effect of Nano-ZrO2 Additions on Fabrication of ZrO2/ZE41 Surface Composites by Friction Stir Processing, Transactions of the Indian Institute of Metals, 75, 1181–1194	16-01-2022	https://doi.org/10.1007/s12666-021-02473-6	204
	Tariq Ahmad, Babar Ahmad, Annayath Maqbool	Recent advances in machining of composites and super alloys by using wire-EDM. A Review, Recent Advances in Manufacturing, Automation, Design and Energy Technologiespp pp115–123	12-10-2021	https://doi.org/10.1007/978-981-16-4222-7_13	205
	Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A Khan, Irfan Anjum Badruddin, Sarfaraz Kamangar, Annayath Maqbool	Improvement in joint efficiency with high productivity and narrow weld formation in friction stir welding, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 236, Issue 2	20-09-2021	https://doi.org/10.1177/09544089211042480	206
	Mohammad Owais Qidwai, Irfan Anjum Badruddin, Mohammad Anas Khan, Saad Alshahrani	Optimization of Microjet location using Surrogate Model coupled with Particle Swarm Optimization Algorithm, Mathematics, 9(17), 2167	05-09-2021	https://doi.org/10.3390/math9172167	207
	Annayath Maqbool, Arshad Noor Siddiquee	Towards Mg based light materials of future: Properties, applications, problems and their mitigation, Journal of Manufacturing Science and Engineering, 144(3): 030801 (18 pages)	17-08-2021	https://doi.org/10.1115/1.4051678	208
	Sameera Mufazzal, SM Muzakkir, Arshad Noor Siddiquee, Zahid A. Khan	A new fuzzy multi-criteria decision-making method based on proximity index value, Journal of Industrial and Production Engineering, 39:1, 42-58	07-08-2021	https://doi.org/10.1080/21681015.2021.1958935	209

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Harveer Singh Pali	Ashish Kumar Singh, Harveer Singh Pali, Mohammad Mohsin Khan	Response surface optimization approach to enhance the performance of diesel engine using ternary blends of biobutanol and biodiesel doped with ZnO nanoparticles, Energy Conversion and Management, Volume 300.	15 January 2024	10.1016/j.enconman.2023.117899	210
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effective utilization of waste plastic derived fuel in CI engine using multi objective optimization through RSM, FuelO, Volume 355.	1 January 2024	10.1016/j.fuel.2023.129448	211
	Harveer Singh Pali, Abhishek Sharma, Naveen Kumar, Yashvir Singh	Optimization of long-term storage stability of Kusum biodiesel using herbal anti-oxidant, Biomass Conversion and Biorefinery, Volume 14, Issue 2, Pages 1959 - 1973.	January 2024	10.1007/s13399-022-02444-x	212
	Akash Dwivedi, Mohammad Mohsin Khan, Harveer Singh Pali	A comprehensive review of thermal enhancement techniques in microchannel heat exchangers and heat sinks, Journal of Thermal Analysis and Calorimetry, Volume 148, Issue 23, Pages 13189 - 13231.	December 2023	10.1007/s10973-023-12451-3	213
	Mohd Mujtaba Ahmed, Harveer Singh Pali, Mohammed Mohsin Khan.	Experimental analysis of diesel/biodiesel blends with a nano additive for the performance and emission characteristics of CI Engine, International Journal of Engine Research, Volume 24, Issue 11, Pages 4500 - 4508.	November 2023	10.1177/14680874221132958	214
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effect of injection timing of waste plastic oil and its blends on CRDI diesel engine, International Journal of Engine Research, Volume 24, Issue 11, Pages 4490 - 4499.	November 2023	10.1177/14680874221119131	215
	Abhishek Sharma, Harveer Singh Pali, Manish Kumar, Nishant Kumar Singh, Yashvir Singh, Deepak Singh	Study the effect of optimized input parameters on a CRDI diesel engine running with waste frying oil methyl ester-diesel blend fuel with ZnO nanoparticles: a response surface methodology approach, Biomass Conversion and Biorefinery, Volume 13, Issue 14, Pages 13127 - 13152.	September 2023	10.1007/s13399-021-02158-6	216
	Yashvir Singh, Harveer S Pali, Nishant K Singh, Abhishek Sharma, Amneesh Singla	Effect of nanoparticles as additives to the biofuels and their feasibility assessment on the engine performance and emission analysis—A review, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 237, Issue 2, Pages 492 - 510.	April 2023	10.1177/09544089221109723	217
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	A comprehensive review on the production of alternative fuel through medical plastic waste, Sustainable Energy Technologies and Assessments, Volume 55.	February 2023	10.1016/j.seta.2022.102924	218
	R.H. Vali, H.S. Pali, M.M. Ahmed, A.K. Singh, A. Kumar, A. Sharma	Predictive modelling through RSM for diesel engine using Al2O3 nanoparticles fuel blends	2023	10.1007/s13762-023-05317-6	219
	Harveer Singh Pali, Abhishek Sharma, Manish Kumar, Vivek Anand Annakodi, Van Nhanh Nguyen, Nishant Kumar Singh, Yashvir Singh, Dhinesh Balasubramanian, Balakrishnan Deepanraj, Thanh Hai Truong, Phuoc Quy Phong Nguyen	Enhancement of combustion characteristics of waste cooking oil biodiesel using TiO2 nanofluid blends through RSM, Fuel, Volume 331	1 January 2023	10.1016/j.fuel.2022.125681	220
	R. Hussain Vali, Anh Tuan Hoang, M. Marouf Wani, Harveer Singh Pali, Dhinesh Balasubramanian, Müslüm Arici, Zafar Said, Xuan Phuong Nguyen.	Optimization of variable compression ratio diesel engine fueled with Zinc oxide nanoparticles and biodiesel emulsion using response surface methodology, Fuel, Volume 323.	1 September 2022	10.1016/j.fuel.2022.124290	221
	Abhishek Sharma, Harveer Singh Pali, Manish Kumar, Nishant Kumar Singh, Erween Abd Rahim, Yashvir Singh, Naveen Kumar Gupta.	Effect of α-aluminium oxide nano additives with Sal biodiesel blend as a potential alternative fuel for existing DI diesel engine, Energy and Environment.	2022	10.1177/0958305X221133257	222
	Harveer Singh Pali, Abhishek Sharma, Naveen Kumar, Yashvir Singh.	Biodiesel yield and properties optimization from Kusum oil by RSM, Fuel, Volume 291	1 May 2021	10.1016/j.fuel.2021.120218	223
	Ashish Kumar Singh, Harveer Singh Pali, Mohammad Mohsin Khan	Performance and emission analysis of waste animal fat methyl esters blends on naturally aspirated single cylinder engine, Journal of Engineering Research (Kuwait), Volume 9	2021	10.36909/jer.ICCEMME.15833	224

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Abhijit Dey	Basant Lal, Abhijit Dey, Mohamamd Farooq Wani	Influence of TiCp ceramic reinforcement on Ti6Al4V alloy matrix via spark plasma sintering technique,	2024	https://doi.org/10.1080/2374068X.2024.2307304	225
	Khursheed Ahmad Sheikh, Mohammad Mohsin Khan, Abhijit Dey	Comprehensive Analysis of TiC-Reinforced ZA-37 Alloy Matrix Composites: Microstructural, Hardness, and Corrosion Performance	2024	https://doi.org/10.1007/s40735-024-00823-7	226
	Basant Lal, Abhijit Dey	Fretting wear characteristics of Ti6Al4V/TiC nano composites Using Response Surface Method	2024	https://doi.org/10.1016/j.triboint.2024.109412	227
	H. K. Mahilary. Dey A.	Preparation and application of carboxylated and mechanically attrited carbon for adsorptive removal of crystal violet dye.	2023	DOI https://doi.org/10.1039/D2EW00723A	228
	Abhijit Dey, Premdeep Singh Rathee, Mohammad Mohsin Khan	Computational Fluid Dynamics Approach for Frictional Heat Flow Analysis During Friction Stir Welding Process	2023	https://doi.org/10.1007/s13369-022-07215-4	229
	Amit Kumar Dey Abhijit Dey	Use of electrochemical technique for the removal of lead and nickel from modelled aqueous solution, 12 (8).	2023	doi: 10.48047/ecb/2023.12.8.74	230
	Mohammad Mohsin Khan, Abhijit Dey	Microstructure-abrasive wear correlation of in situ ZA27/TiC composites, 48 (16), 22928-22942	2022	https://doi.org/10.1016/j.ceramint.2022.04.250	231
	G Chaudhary, A Dey, AK Dey	Stress and Delamination Analysis on Overlapped-Grouped and Overlapped-Dispersed Tapered Composite Laminate, 58 (5), 612-623.	2022	https://doi.org/10.1007/s10778-023-01185-2	232
	Mohammad Mohsin Khan, Abhijit Dey	Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiCp MMCs	2022	https://doi.org/10.1016/j.matchemphys.2021.125319	233
	Basant Lal, Abhijit Dey, Mohamamd Farooq Wani	Prediction of Surface Roughness During Dry Sliding Wear: Characteristics of Ti-6Al-4V Alloys, 10(1), 12.	2022	DOI: 10.4018/IJSEIMS.2022010104	234
	RUMI GOSWAMI, AMIT KUMAR DEY, ABHIJIT DEY	POSITIVE IMPACT ON ENVIRONMENT DUE TO COVID-19 LOCKDOWNS IN PARTS OF INDIA: A REVIEW	2022	DOI:10.30638/eemj.2022.052	235
	Amit Kumar Dey, Abhijit Dey, Rumi Goswami	Fixed-bed column analysis for adsorption of Acid scarlet 3R dye from aqueous solution onto chemically modified betel nut husk fibre	2022	doi: 10.5004/dwt.2022.28253	236
	RUMI GOSWAMI AMIT KUMAR DEY AND ABHIJIT DEY	COMPARATIVE ANALYSIS ON AIR AND WATER QUALITY IN PARTS OF INDIA: BEFORE AND DURING LOCKDOWN DUE TO COVID -19, 1492-1501.	2022		237
	Basant Lal, Abhijit Dey, MF Wani	Effect of Frictional Heating on Mechanically Mixed Layers during Dry Sliding Contact of Ti-6Al-4V Alloys at High Temperature in Vacuum Condition, 29 (10), 2250127	2022	https://doi.org/10.1142/S0218625X2250127X	238
	B Lal, A Dey, MF Wani	INFLUENCE OF TEMPERATURE AND APPLIED LOAD ON ADHESION AND ABRASION WEAR CHARACTERISTICS OF TI6AL4V ALLOY, 10 (1),11.	2022	DOI: 10.4018/IJSEIMS.302234	239
	Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, Bibhuti Bhushan Biswal	Processing of hardened steel by MQL technique using nano cutting fluids,2021/2/17,Materials and Manufacturing Processes,316-328,36.	2021-2-17	doi.org/10.1080/10426914.2020.1832688	240
	Abhijit Dey, Mrinal Shrivastav, Pawan Kumar	Optimum performance evaluation during machining of Al6061/cenosphere AMCs using TOPSIS and VIKOR based multi-criteria approach, 2174-2188	2021	https://doi.org/10.1177/0954405420958770	241
	Abhijit Dey, Krishna Murari Pandey, Ram Naresh Rai, Akhtar Khan, Anshuman Das	APPLICATION POTENTIAL OF RESPONSE SURFACE METHOD ON ELECTRO DISCHARGE MACHINING OF AA6061–CENOSPHERE AMCs PREPARED BY COMPOCASTING METHOD, 2150056	2021	https://doi.org/10.1142/S0218625X21500566	242
	Mohammad Mohsin Khan, Abhijit Dey, Mohammad Irfan Hajam	Experimental Investigation and Optimization of Dry Sliding Wear Test Parameters of Aluminum Based composite, 14, 4009-4026.	2021	https://doi.org/10.1007/s12633-021-01158-5	243
	Abhijit Dey, Mohammad Mohsin Khan	MCD Approach for Assessing the Optimal Operating Condition during Sliding Wear Characteristics of LM25/SiC AMCs Processed by an Improved Stir Casting Technique, 14, 3673-3691.	2021	https://doi.org/10.1007/s12633-021-01123-2	244
	Mohammad Mohsin Khan, Abhijit Dey	Selection of optimal processing condition during abrasive Wear of in-situ ZA-37/TiCp composites using MCDM technique, 47,20090-20107	2021	https://doi.org/10.1016/j.ceramint.2021.04.016	245
	Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, Bibhuti Bhushan Biswal	Processing of hardened steel by MQL technique using nano cutting fluids, 36, 316-328.	2021	https://doi.org/10.1080/10426914.2020.1832688	246

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Manoj Kumar	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Possible utilization of waste tyre as a potential energy source: A short review”, Journal of Biofuels, Vol. 12, pp. 1-9	March, 2021	http://dx.doi.org/10.5958/0976-4763.2021.00003.9	247
	Ravi Kant Ravi, Mukesh Kumar, Manoj Kumar, and R.P. Saini	Experimental investigation on heat transfer and fluid flow characteristics for roughened counter flow solar air collector”, International Journal of Green Energy (Taylor & Francis), vol.19(8), pp. 865-878	September, 2021	https://doi.org/10.1080/15435075.2021.1969938	248
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Application of pyrolysis and hydrothermal liquefaction process to convert biofuel from biomass” Journal of Physics: conference series	November, 2021	doi:10.1088/1742-6596/2062/1/012029	249
	Manoj Kumar, Neeraj Mehla, Shobhit Srivastava and Ravi Kant Ravi	Water generation from atmospheric air by using desiccant materials- nature-based solution- a review”, World Journal of Engineering, vol. 20(5), pp. 956-973	May 2022	https://doi.org/10.1108/WJE-07-2021-0420	250
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effect of injection timing of waste plastic oil and its blend on CRDI diesel engine”, International Journal of Engine Research,	September, 2022	https://doi.org/10.1177/14680874221119131	251
	Chandan Swaroop Meena, Amit Nandan Prajapati, Ashwani Kumar and Manoj Kumar	Utilization of solar energy for water heating application to improve building energy efficiency: An Experimental Study”, Buildings (MDPI), vol. 12(12), pp. 2166	December, 2022	https://doi.org/10.3390/buildings12122166	252
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	A comprehensive review on the production of alternative fuel through medical plastic waste”, Journal of Sustainable Technologies and Assessments, Vol.55 pp.102924	February 2023	https://doi.org/10.1016/j.seta.2022.102924	253
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effective utilization of waste plastic derived fuel in CI engine using multi objective optimization through RSM, FuelO, Volume 355.	1 January 2024	10.1016/j.fuel.2023.129448	254

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Sandeep Rathee	Manu Srivastava, Sandeep Rathee, Vivek Patel, Atul Kumar, Praveennath G Koppad	A review of various materials for additive manufacturing: Recent trends and processing issues	2022	https://doi.org/10.1016/j.jmrt.2022.10.015	255
	Manu Srivastava, Sandeep Rathee, Ankit Tiwari, Mehul Dongre	Wire arc additive manufacturing of metals: A review on processes, materials and their behaviour	2023	https://doi.org/10.1016/j.matchemphys.2022.126988	256
	Ashish Yadav, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Investigation of bead morphology and mechanical behaviour for metal inert gas welding-based WAAM in pulsed mode metal transfer on 316LSi stainless steel	2023	https://doi.org/10.1080/01694243.2023.2241642	257
	Ashish Yadav, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Functionally graded deposition of dissimilar steel (316LSi and ER70S-6) fabricated through twin-wire arc additive manufacturing	2024	https://doi.org/10.1016/j.matlet.2023.135395	258
	Shazman Nabi, Sandeep Rathee, Manu Srivastava	Friction and wear analysis of Al-5052/NiTi surface composites fabricated via friction stir processing	2024	https://doi.org/10.1016/j.triboint.2023.109179	259
	Shazman Nabi, Sandeep Rathee, MF Wani, Manu Srivastava	Effect of multiple passes on the properties of Al-5052/SiC surface composites fabricated via friction stir processing	2024	https://doi.org/10.1016/j.matchemphys.2023.128819	260
	Manu Srivastava, Nasir Khan, Shazman Nabi, Sandeep Rathee	Microstructure and Mechanical Properties of Friction Stir Welded Al–Mg–Si Alloys Under Variable Parameter Conditions	2023	http://doi.org/10.1007/s40033-023-00511-9	261
	Shazman Nabi, Sandeep Rathee, MF Wani, Manu Srivastava	Al-5052/SiC + CeO2 hybrid surface composites: Achieving improved microstructural and mechanical behaviour via friction stir processing	2024	https://doi.org/10.1016/j.matlet.2024.136048	262
	Pushkal Badoniya, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Parametric investigation on wire arc additive manufacturing of ER70S-6 low-carbon steel for fabrication of thick-walled parts	2023	https://doi.org/10.1080/01694243.2023.2275823	263
	Farooz Ahmad Najar, Sandeep Rathee, Manu Srivastava, Ashish Yadav	Tribological and Corrosion Behaviour of Al-Mg-CeO2 metal matrix surface composite	2024	https://doi.org/10.1016/j.triboint.2024.109508	264
	Ashish Yadav, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Microstructure transformations and improving wear resistance of austenitic stainless steel additively fabricated by arc-based DED process	2024	https://doi.org/10.1016/j.dt.2024.02.006	265
	Sandeep Rathee, M Srivastava “Book Titled Wire Arc Additive Manufacturing: Fundamental Science and Advancements 2023 CRC Press, Taylor & Francis Group”
	S.Nabi, M.F wani, Sandeep Rathee, M Srivastava,	Wire Arc Additive Manufacturing through GMAW Route	2023	Book Chapter	266
	B Kumar, SA Nazir, Sandeep Rathee, M Srivastava,	Wire Arc Additive Manufacturing of Non-ferrous Alloys	2023	Book Chapter	267
	Book Titled “Friction Stir Welding and Processing: Fundamentals to Advancements Sandeep Rathee, M Srivastava, J P Davim” publisher Wiley 2023
	F Najar, Sandeep Rathee, M Srivastava, S.Nabi	Friction Stir Welding: An Overview, in the book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter	268
	A Kumar, D Flouria M Srivastava, Sandeep Rathee,	Fundamentals of Friction Stir Processing, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter
	Sandeep Rathee ,M Srivastava, S Nabi, A Kumar	Sample Preparation and Microstructural Characterization of Friction Stir Processed Surface Composites, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter
	A Yadav, Abhignya, M Srivastava, Sandeep Rathee ,	Analysis of Friction Stir Welding Tool Using Various Threaded Pin Profiles: A Case Study, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements”	2023	Book Chapter
	A Yadav, Abhignya, M Srivastava, Sandeep Rathee ,	Static Structural and Thermal Analysis of Honeycomb Structure Fabricated by Friction Stir Process Route: A Case Study, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr.Dinesh Kumar R	Jeyaprakash N, Yang C-H, Karuppasamy SS, Rajendran DK	Correlation of microstructural with corrosion behaviour of Ti-6Al-4V specimens developed through selective laser melting technique. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2022;236(5):2240-2251	2022	doi:10.1177/09544089221087823	269
	A Karpagarak Dinesh kumar Rajendran	Effect of GTAW process parameters on joining stainless steel 316L	2022	https://doi.org/10.1063/5.0095789	270
	Rajagopal, V., Rajendran, D. & Muthukumaran, S.	Parametric, Mechanical and Metallurgical Characterization of Dissimilar Friction Stir Welded AA2014-AA2219	2024	https://doi.org/10.21203/rs.3.rs-2652119/v1	271
	Sagar M. Baligidad , Syed Abdullah , Dinesh Kumar Rajendran	Investigation on fatigue life of HAp and rGO hybrid coating on the PEEK artificial screws for dental implant	2023,	https://doi.org/10.1016/j.matchemphys.2023.128381	272
	Rajagopal, V., Rajendran, D. & Muthukumaran, S.	Multi-objective optimization and characterization of AA2219-T87 and AA6061-T6 dissimilar friction stir welded joints under the effect of copper backing using AUGMECON. Sadhana 49, 32 (2024).	2024	https://doi.org/10.1007/s12046-023-02360-4	273
	Deepak Kumar Naik, Ved Prakash Sharma, R. Dinesh Kumar	Automation in Welding Industries	2024	https://doi.org/10.1002/9781394172948.ch3	274

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Azhar Jameel	V. Gupta, Azher Jameel, S. K. Verma, S. Anand, Y. Anand	An insight on NURBS based Isogeometric Analysis, its current status and involvement in Mechanical Applications” Archives of Computational Methods in Engineering (Springer), vol. 30, pp. 1187-1230, 2023.	2023	https://doi.org/10.1007/s11831-022-09838-0	275
	A. S. Lone, Azher Jameel, G. A. Harmain	Enriched Element Free Galerkin Method for Solving Frictional Contact between Solid Bodies”, Mechanics of Advanced Materials and Structures (Taylor and Francis), Vol. 30, pp. 4227-4245, 2023.	2023	https://doi.org/10.1080/15376494.2022.2092791	276
	A. S. Lone, Azher Jameel, G. A. Harmain	Modelling of Contact Interfaces by Penalty Based Enriched Finite Element Method”, Mechanics of Advanced Materials and Structures (Taylor and Francis), Vol. 30, pp. 1485–1503, 2023	2023	10.1080/15376494.2022.2034075	277
	S. A. Kanth, A. S. Lone, Azher Jameel, G. A. Harmain	Estimation of crack tip plastic zones in presence of material irregularities by extended finite element method”, Journal of the Brazilian Society of Mechanical Sciences and Engineering (Springer), Vol. 45, pp. 340, 2023.	2023	https://doi.org/10.1007/s40430-023-04235-5	278
	A. S. Lone, S. A. Kanth, G. A. Harmain, Azher Jameel	Modelling of large sliding between contacting bodies by penalty based element free Galerkin method using node-to-segment approach”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (Springer), Vol. 01, pp. 1-18, 2023.	2023	https://doi.org/10.1007/s40997-023-00605-5	279
	S. A. Kanth, G. A. Harmain, Azher Jameel	Assessment of Fatigue Life in Presence of Different Hole Geometries by X-FEM”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (Springer), Vol. 47, pp. 1145-1159, 2023.	2023	https://doi.org/10.1007/s40997-022-00569-y	280

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr.Deepak Kumar Naik	Himadri Majumder, Akhtar Khan, Deepak Kumar Naik, Ch Sateesh Kumar	Machinability Assessment Of Shape Memory Alloy Nitinol During Wedm Operation: Application Potential Of Taguchi Based Ahp–Dfa Technique	2022	https://doi.org/10.1142/S0218625X22500020	281
Dr.Deepak Kumar Naik	Deepak Kumar Naik, Ved Prakash Sharma, R. Dinesh Kumar	Automation in Welding Industries	2024	https://doi.org/10.1002/9781394172948.ch3	282

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Ved Prakash Sharma	Ved Prakash Sharma, Naresh Varma Datla	Fracture Behavior and Reliability of Low-Silver Lead-Free Solder Joints, Journal of Electronic Packaging, ASME, https://doi.org/10.1115/1.4054096, MAR, 2022	2022	https://doi.org/10.1115/1.4054096	283
	Ved Prakash Sharma, Naresh Varma Datla	Effect of aging time and loading rate on fracture behavior of Cu/Sn-0.7Cu solder joints, Microelectronics Reliability, Elsevier, https://doi.org/10.1016/j.microrel.2021.114381, SEP, 2021	2021	https://doi.org/10.1016/j.microrel.2021.114381	284
	Ved Prakash Sharma, Naresh Varma Datla	Effect of bond-line thickness and mode-mixity on the fracture behavior and traction separation law of Sn-0.7Cu solder joints, Engineering Failure Analysis, Elsevier, https://doi.org/10.1016/j.engfailanal.2021.105855, JAN, 2022	2022	https://doi.org/10.1016/j.engfailanal.2021.105855	285
	Ved Prakash Sharma, Manoj kumar, Avadhesh Yadav, Ravi Kant Ravi, Venkateswara R. Kode	"Atmospheric Water Generation with Different Grades of Molecular Sieve" for the book titled "Highly Efficient Thermal Renewable Energy Systems: Design, Optimization, and Applications" published by Routledge (Taylor and Francis Group).	2023	Book Chapter
	Ved Prakash Sharma, Deepak Kumar, Dinesh Rajendran	"Automation in Welding Industries" for the book titled "Automation in Welding Industry: Incorporating Artificial Intelligence, Machine Learning and Other Technologies" published by Scrivener Publishing LLC (Wiley).	2024	https://doi.org/10.1002/9781394172948.ch3	286

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Mukund Dutt Sharma	S Kumar, R Sehgal, MF Wani, M.D sharma	Friction and wear properties of core-shell (CI is a core & GO is a shell) particles based magnetorheological fluid under steel on steel point contacts	2023	https://doi.org/10.1016/j.jiec.2022.11.028	287
	Sheikh Haris Mukhtar, MF Wani, M.D sharma, Rakesh Sehgal	Nano-mechanical and nano-tribological characterisation of self-lubricating MoS2 nano-structured coating for space applications	2023	https://doi.org/10.1016/j.triboint.2022.108017	288
	Rakesh Sehgal, Neeraj Gupta, Anuradha Tomar, Vigna Kumaran, M.D sharma	Smart Electrical and Mechanical Systems: An Application of Artificial Intelligence and Machine Learning	2022	Academic Press	289
	Sanjay Kumar, Rakesh Sehgal, MF Wani, M.D sharma	Stabilization and tribological properties of magnetorheological (MR) fluids: A review	2021	https://doi.org/10.1016/j.jmmm.2021.168295	290
	A Awasthi, N Panwar, M Pant, S Bala, A Chauhan, M.D sharma	Characterization, Fabrication and Dry Sliding Wear Analysis of Hybrid Aluminium 6061 Composite	2021	10.24874/ti.1012.11.20.03	291
	Sanjay Kumar, Rakesh Sehgal, MF Wani, M.D sharma	Magnetorheological study of core− shell structured carbonyl iron/2-D graphene oxide microparticles suspensions with improved sedimentation stability	2023	https://doi.org/10.1016/j.jmmm.2023.170852	292
	Tahir Ahmad Dar, Sanjay Kumar, Rakesh Sehgal, M.F. Wani, M.D sharma, Umida Ziyamukhamedova	Next-generation ecofriendly MR fluid: Hybrid GO/ Fe2O3 encapsulated carbonyl iron microparticles with improved magnetorheological, tribological, and corrosion resistance properties	2023	https://doi.org/10.1016/j.carbon.2023.118331	293
	Safoora Shabir, M.D sharma	Surface Modification of Ti3Al2.5V Titanium Alloy Using Laser Texturing With Improved Wettability, Corrosion and Bioactivity Behaviour	2024	10.1007/s12666-023-03203-w	294
	Sanjay Kumar, Bharat Kumar, Rishabh Sehgal, MF Wani, et al.	Advantages and Disadvantages of Metal Nanoparticles	2023	Book Chapter	295

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. M. Mohsin Khan	M. Abas, B., Iqbal, S., Bukhari, S., Villivalam, S., & Khan	A Retrospective of Workplace Deviance in Hospitality: A Two-tier Literature Review	2024	https://doi.org/10.1177/09722629231220990	296
	Rajesh Gangakhedkar, Mohsin Khan, M Karthik	Understanding carpooling intentions of Generation Z of India: a structural equation modeling approach	2023	https://doi.org/10.1080/03081060.2023.2294342	297
	Mohsin Khan, Rajeesh Viswanathan	Effectiveness of online teaching and learning in Indian universities during the COVID-19 pandemic	2023	https://doi.org/10.1108/IJEM-09-2020-0441	298
	M. Khan, M. and Goli	Online learning: predicting student engagement and continued intention	2023	https://doi.org/10.1504/IJLT.2023.135904	299
	Mohsin Khan, Rampalli Prabhakara Raya, Rajeesh Viswanathan	Enhancing employee innovativeness and job performance through a culture of workplace innovation	2022	https://doi.org/10.1108/IJPPM-09-2020-0466	300
	Mahendar Goli, Mohsin Khan	Behavioural intention to use social networking mobile apps: the case of TikTok	2022	https://doi.org/10.1504/IJBIR.2022.125667	301
	Mohsin Khan, Abhijit dey	Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiC MMCs	2022	https://doi.org/10.1016/j.matchemphys.2021.125319	302
	Mohsin Khan, Abhijit dey	Microstructure-abrasive wear correlation of in situ ZA27/TiC composites, 48 (16), 22928-22942	2022	https://doi.org/10.1016/j.ceramint.2022.04.250	303

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. M. F.Wani	Umida Ziyamukhamedova, Shah Wasil, Sanjay Kumar, Rakesh Sehgal, M. F. Wani, Chandra Shekhar Singh, Nodirjon Tursuno, and Himanshu Shekhar Gupta,	Investigating Friction and Antiwear Characteristics of Organic and Synthetic Oils Using h-BN Nanoparticle Additives: A Tribological Study”. Lubricants 2024, 12, 27.	2024	https://doi.org/10.3390/lubricants12010027	1
	Basant Lal, Abhijit Dey and M. F. Wani,	Influence of TiCp ceramic reinforcement on Ti6Al4V alloy matrix via spark plasma sintering technique,	2024	https://doi.org/10.1080/2374068X.2024.2307304	2
	Mohammad Arif Parray, Sajad Hussain Din and MF Wani,	Enhancing machining performance of EN24 steel with CVD diamond coated tool and minimal quantity lubrication	2024	DOI 10.1088/2631-8695/ad2035	3
	Nabi, S Rathee, MF Wani, M Srivastava	Effect of multiple passes on the properties of Al-5052/SiC surface composites fabricated via friction stir processing	2024	https://doi.org/10.1016/j.matchemphys.2023.128819	4
	Nabi, S Rathee, MF Wani, M Srivastava	Al-5052/SiC+CeO2 hybrid surface composites: Achieving improved microstructural and mechanical behaviour via friction stir processing,	2024	https://doi.org/10.1016/j.matlet.2024.136048	5
	Parray, Mohammad Arif, and Sajad Hussain Din and M F Wani	Enhancing machining performance of EN24 steel with CVD diamond coated tool and minimal quantity lubrication	2024	DOI 10.1088/2631-8695/ad2035.	6
	Sanjay Kumar, Rakesh Sehgal, M.F. Wani, Mukund Dutt Sharma, Umida Ziyamukhamedova, Tahir Ahmad Dar	Next-generation ecofriendly MR fluid: Hybrid GO/Fe2O3 encapsulated carbonyl iron microparticles with improved magnetorheological, tribological, and corrosion resistance properties	2023	https://doi.org/10.1016/j.carbon.2023.118331	7
	Sanjay Kumar, Rakesh Sehgal, M.F. Wani, Mukund Dutt Sharma	Friction and wear properties of core-shell (CI is a core & GO is a shell) particles based magnetorheological fluid under steel on steel point contacts	2023	https://doi.org/10.1016/j.jiec.2022.11.028.	8
	Bishit, C, Wani, M.F. and Sehgal Rakesh	Fabrication and self-lubricating tribological characterization of Cu-Ni/TiC/CaF2 composite for railway switch slide baseplate.	2023	https://doi.org/10.1016/j.wear.2023.204890	9
	Bishit, C, Wani, M.F. and Sehgal Rakesh	Effect of CaF2 nanoparticles on the microstructure evolution, mechanical properties and tribological behaviour of Cu-Ni alloy/cBN self-lubricating composites	2023	https://doi.org/10.1016/j.triboint.2023.108884	10
	Qu Ain, MF Wani, R Sehgal, MK Singh	Insights into nanomechanical and nanotribological characterization of cross-linked polymer nanocomposites via molecular dynamics simulation.	2023		11
	S.H.Mukhtar , Ahraf Gulzar, Shahid Saleem , M.F. Wani , Rakesh Sehgal a, A.A. Yakovenko b, I.G. Goryacheva, Mukund Dutt Sharma	Advances in Development of Solid Lubricating MoS2 Coatings for Space Applications: A Review of Modeling and Experimental Approaches	2023	, https://doi.org/10.1016/j.triboint.2023.109194	12
	S Kumar, R Sehgal, MF Wani, MD Sharma	Magnetorheological study of core− shell structured carbonyl iron/2-D graphene oxide microparticles suspensions with improved sedimentation stability,	2023	https://doi.org/10.1016/j.jmmm.2023.170852.	13
	Himanshu Shekhar Gupta, Rakesh Sehgal, Mohammad Farooq Wani	Energy sources, part a: recovery, utilization, and environmental effects investigating the effect of GnP, ZnO, and CuO nanoparticles on the tribological, rheological, and corrosion behavior of bio-based mahua oil	2023	http://dx.doi.org/10.1080/15567036.2023.2231386	14
	Akshay Balachandran, Irfan Majeed Bhat, Ruheena Tabasum, Ghulam Mohd, Mohammad Farooq Wani, Kowsar Majid, Malik Wahid, Saifullah Lone	Transfer-Printed Environmental-Friendly Anisotropic Filter with Laser-Controlled Micropores for Efficient Oil/Water Separation	2023	https://doi.org/10.1021/acsapm.3c00063	15
	TA Mufti, Shazia Gul Jan, M F Wani, R Sehgal	Development, Mechanical Characterization and High Temperature Tribological Evaluation of Magnetron Sputtered Novel MoS2-CaF2-Ag Coating for Aerospace Applications.	2023	https://doi.org/10.1016/j.triboint.2023.108374.	16
	Umida Ziyamukhamedova, M F Wani, Nodir Tursunov	Investigating Friction and Antiwear Characteristics of Organic and Synthetic Oils using h-BN Nanoparticle Additives	2023		17
	S Bashir, MJ Khan, M. F Wani, SS Saleem, MM John, QJ Ashraf, T Nissar	‘Extreme pressure properties of garlic oil: comparative investigations with PAO4 base oil and PAO/garlic oil blend	2023	DOI 10.1088/2631-8695/acb5e2	18
	Bharat Kumar, Shahid Saleem, M. F. Wani, Rakesh Sehgal, Sanjay Kumar	Influence of Nano-Lubrication on Tribological Behavior of AZ91 Magnesium Alloy Under Fretting Condition	2023	DOI: 10.24874/ti.1426.12.22	19
	Sanjay Kumar, Bharat Kumar, Rishabh Sehgal, MF Wani, Deepak Kumar, Mukund Dutt Sharma, Vivek Singh, Rakesh Sehgal, Vijay Kumar,	Nanoparticles Reinforced Metal Nanocomposites: Mechanical Performance and Durability	2023		20
	M. F. Wani, Umida Ziyamukhamedova, Taseer A. Mufti1, Rakesh Sehgal, and Sheikh S. Saleem	Design, fabrication and characterization of MoS2 self-lubricating pure MoS2 Coatings for space applications using PVD magnetron sputtering	2023	Doi.org/10.1051/e3sconf/202340105084	21
	M. F. Wani, Umida Ziyamukhamedova, Taseer A. Mufti, Rakesh Sehgal, and Sheikh S. Saleem	Fabrication and characterization of RF magnetron sputtered composite MoS2 and ZrN coatings on Ti3SiC2 max phase for space applications.	2023	Doi.org/10.1051/e3sconf/202340105084	22
	Singh, M F Wani, M M Wani	A comparative investigation on tribological properties of piston ring / cylinder liner tribo-pair using GNP and GNF dispersed lubricants Order a copy of this article,	2022	DOI: 10.1504/IJSURFSE.2022.10051381	23
	S, Haris, M F Wani, R. Sehgal, M. D. Sharma	Nano-Mechanical and Nano-Tribological Characterization of Self-Lubricating MoS2 Nano-Structured Coating for Space Applications	2022	https://doi.org/10.1016/j.triboint.2022.108017	24
	P D Shriviyas, M F Wani, R. Sehgal, C S Bishat, M. S. Charoo, A Raina	Synergetic effect of surface texturing and graphene nanoplatelets on the tribological properties of hybrid self-lubricating composite.	2022	https://doi.org/10.1016/j.triboint.2022.107434	25
	G Khajuria, M F Wani, M J Mir	Impact of Micro-Indentation on Hardness and Indentation Depth of Ni-Cr Super Alloys	2022	https://doi.org/10.1080/2374068X.2022.2091841	26
	PD Srivyas, MS Charoo, M F Wani,R Sehgal, A Raina, MIU Haq,	Impact of surface texturing on the tribological behaviour of aluminium-silicon (Al-Si/Al2O3) advanced composite under dry and lubricating conditions	2022		27
	Kumar Parveen, Jibin Philip, M F Wani, Rai Himanshu, Vashishtha Himanshu, Kumar Deepak	Study of Tribological Properties of EN8 Steel against Inconel X-750 Alloy under Dry and Lubricated Conditions,	2022	ttps://doi.org/10.1007/s12666-022-02787-z.	28
	HS Gupta, R Sehgal, M F Wani	Tribological characterization of eco-friendly bio-based mahua and flaxseed oil through nanoparticles	2022		29
	M F Wani, A Chartfi, R Aziz, M Kharrat, S Rakesh	Tribological behaviour of nano-sized beta phase silicon nitride: Effects of the contact conditions	2022	https://doi.org/10.1515/ijmr-2021-8685	30
	B Lal, A Dey, M F Wani	Effect of mechanically mixed layers during dry sliding contact of Ti6Al4V alloys at high temperature in Vacuum condition	2022	https://doi.org/10.1142/S0218625X2250127X	31
	B Lal, A Dey, M F Wani	Influence of Temperature and Applied Load on Adhesion and Abrasion Wear Characteristics of Ti6Al4V Alloy	2022	DOI: 10.4018/IJSEIMS.302234	32
	Singh G, Wani MF, Wani MM	Fuel energy Saving in SI engines using Graphene and Graphite as Nano additive: A comparative study.	2021	https://doi.org/10.1007/s13204-021-02298-1	33
	Wani M F, Kharrat M, Sehgal R	Friction and wear characterization of nanocomposites based on Si3N4 reinforced with SiC, Mo, MoSi2 nano-particles.	2021		34
	B Lal, A Dey, M F Wani,	Prediction of Surface Roughness During Dry Sliding Wear: Characteristics of Ti-6Al-4V Alloys.	2021	.DOI: 10.4018/IJSEIMS.2022010104	35
	Md Al-Amin Ahmad, MA Rani, T VV N Rao, M Danish, A b Mahfouz, R P Parameswari, M F Wani	Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process	2021	https:// doi.org/10.1016/j.matchemphys. 2021.125320	36
	Singh G, Wani MF, Wani MM.	Tribological evaluation of piston ring/cylinder liner assembly in automotive engines using GNP as a lubricant additive	2021		37
	Banday S, Wani, M. F.	Adhesion Strength and Tribological Property of Self-lubricating Si/MoS2 Nanocoating by Pulsed Laser Deposition Method.	2021	; https:// doi.org/10.1016/ j.ceramint. 2021.09.068	38
	Singh G, Wani MF, Wani MM	A Comparative Investigation on Tribological Properties Of Piston Ring/Cylinder Liner Tribo-Pair Using GNP and GNF Dispersed Lubricants.	2021		39
	Singh G, Wani MF, Wani MM	An Experimental Study on Fuel Energy Saving in Gasoline Engines Using GNP as a Lubricant Additive	2021		40
	Kumar S, Sehgal R, Wani MF, Sharma MD	Stabilization and Tribological Properties of Magnetorheological (MR) Fluids: A Review.	2021	. https://doi.org/10.1016/j.jmmm.2021.168295	41

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. G.A. Harmain	Showkat Ahmad Kanth, Aazim Shafi Lone, GA Harmain, Azher Jameel,	“Estimation of crack tip plastic zones in presence of material irregularities by extended finite element method”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer Berlin Heidelberg.	2023	https://doi.org/10.1007/s40430-023-04235-5	42
	Hemant Kumar, Rismaya Kumar Mishra, Ghulam Ashraf Ul Harmain,	“Effect of mating material on wear behaviour of Nibased hardface coating”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, SAGE Publications.	2023	https://doi.org/10.1177/14644207231190492	43
	Chandra Kant, Gulam Ashraf Ul Harmain,	“Effect of cold working on mechanical properties of pure-304L stainless steel with variable temperature-an experimental study”, Advances in Materials and Processing Technologies.	2023	doi.org/10.1080/2374068X.2023.2199228	44
	Aazim Shafi Lone, G A Harmain, Azher Jameel,	“Modeling of contact interfaces by penalty based enriched finite element method”, Mechanics of Advanced Materials and Structures, Taylor and Francis.	2022	doi.org/10.1080/15376494.2022.2034075	45
	Aazim Shafi Lone, GA Harmain, Azher Jameel,	“Modeling of Large Sliding Between Contacting Bodies by Penalty-Based Element-Free Galerkin Method Using Node-to-Segment Approach”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering.	2023	doi.org/10.1007/s40997-023-00605-5	46
	Deepak Kumar, GA Harmain, Gaurav Gaurav, KP Lijesh, Basil Kuriachen, Harish Hirani, Jibin T Philip,	“A Novel Seal Design to Enhance MR Brake Performance”, Transactions of the Indian Institute of Metals.	2022	10.1007/s12666-022-02848-3	47
	Showkat Ahmad Kanth, GA Harmain, Azher Jameel,	“Assessment of Fatigue Life in Presence of Different Hole Geometries by X-FEM”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Springer International Publishing,	2022	10.1007/s40997-022-00569-y	48
	Ashutosh Kumar, GA Harmain,	“A Study on Fatigue Life Assessment of Alloy 718 as a Function of Load Ratio in Conjunction with Newman’s Model”, Transactions of the Indian Institute of Metals,	2022	10.1007/s12666-022-02812-1	49
	Showkat Ahmad Kanth, G.A Harmain, Azher Jameel,	“Investigation of fatigue crack growth in engineering components containing different types of material irregularities by XFEM”, Mechanics of Advanced Materials and Structures, Taylor and Francis.	2021	doi.org/10.1080/15376494.2021.1907003	50
	Rismaya Kumar Mishra, Hemant Kumar, G.A Harmain, Shaju, K Albert,	“Comparative wear behaviour of Ni-Cr-B-Si hardface coatings made by cold metal transfer and plasma transfer Arc welding processes”, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.	2022		51
	G. A. Harmain, Aazim Shafi Lone, Azher Jameel,	“Enriched element free Galerkin method for solving frictional contact between solid bodies”, Mechanics of Advanced Materials and Structures, Taylor and Francis,	2022	doi.org/10.1080/15376494.2022.2092791	52
	Ishfaq Amin Maekai, G.A. Harmain,	“Resistance to slurry erosion by WC-10Co-4Cr and Cr3C2− 25 (Ni20Cr) coaOngs deposited by HVOF stainless steel F6NM”, International Journal of Refractory Metals and Hard Materials, 2022,	2022	doi.org/10.1016/j.ijrmhm.2022.105830	53
	G. A. Harmain, Aazim Shafi Lone, Azher Jameel,	“Modeling of contact interfaces by penalty based enriched finite element method”, Mechanics of Advanced Materials and Structures, Taylor and Francis,	2022	10.1080/15376494.2022.2034075	54
	Chandan, G. A. Harmain,	“Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740H”, International Journal of Pressure Vessels and Piping, Elsevier, Sept 2021.,	2021	doi.org/10.1016/j.ijpvp.2021.104551	55
	Mohammad Zehab Ud Din, G. A. Harmain,	“An Assessment of Sediment Erosion on Pelton Buckets using CFD”, Hydro Power and Dams, 2021.	2021	https://doi.org/10.1177/14644207221103517	56
	Rishmaya, G. A. Harmain,	“Wear Performance of Ni-Cr-B-Si Hard-face Coatings Fabricated by Cold Metal Transfer Welding”, Part C: Journal of Mechanical Engineering Science.2021,	2021	10.1177/09544062211023085	57
	Showkat Ahmad Kanth, G.A. Harmain, Azher Jameel,	“Investigation of fatigue crack growth in engineering components containing different types of material irregularities by XFEM”, Mechanics of Advanced Materials and Structures, Taylor & Francis, 2021,	2021	10.1080/15376494.2021.1907003	58
	Chandra Kant, G. A. Harmain,	“A Model Based Study of Fatigue Life Prediction for Multifarious Loadings”, Key Engineering Materials”, Trans Tech Publications Ltd, 2021,	2021	10.4028/www.scientific.net/KEM.882.296	59
	Ishfaq Amin Maekai, G.A. Harmain,	“An assessment of erosive wear of hydro-turbine steel using statistical modeling and optimization”, International Journal of Surface Science and Engineering, July 2021,	2021	10.24874/ti.780.10.19.02	60
	Chandra Kant, G. A. Harmain,	“Fatigue Life Prediction under Interspersed Over-load in Constant Amplitude Loading Spectrum via Crack Closure and Plastic Zone Interaction Models - A Comparative Study”, 9 th International Conference on Fracture, Fatigue and Wear, FFW 2021,	2nd – 3rd August 2021		61
	Irshad Qadri Ghulam Ashraf Ul Harmain and M. F. Wani,	“A study on machinability of heat-treated Inconel 718 using Ceramic inserts”, IEEE Sponsored International Conference on Emerging Trends in Industry 4.0, OP Jindal University, Raigarh, Chhattisgarh, India,	19-21 May, 2021.		62
	Chandra Kant & G. A. Harmain	“Fatigue Life Prediction Under Interspersed Overload in Constant Amplitude Loading Spectrum via Crack Closure and Plastic Zone Interaction Models—A Comparative Study”, Proceedings of the 9th International Conference on Fracture, Fatigue and Wear, Springer,	2022	10.1007/978-981-16-8810-2_18, ISBN: 978-981-16- 8809, 253 – 260, 2022	63
	Chandra Kant & G. A. Harmain,	“Analysis of Single Overload Effect on Fatigue Crack Propagation Using Modified Virtual Crack Annealing Model”, Recent Development in Mechanics and Design, Springer,	2022	10.1007/978-981-19-4140-5_1, ISBN: 978-981- 19-4139-9, 1 – 8, 2022	64
	Malik Parvez, G. A. Harmain, Jaleel Khan,	“Flow Characteristics of Power Law Fluid Around Circular Cylinder”, Recent Advances in Mechanical Engineering, Springer,	2022	ISBN: 978-981-19-2188-9, 225 – 236, 2022.	65
	Raj Kumar, Mohammad Mursaleen, GA Harmain, Ashutosh Kumar,	“A Critical Review of Fatigue Life Prediction on 316LN SS”, Advances in Modelling and Optimization of Manufacturing and Industrial Systems pp 427–440	2023		66

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. Adnan Qayoum	Bisma Ali, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir	Effect of graphene/hydrofluoroether (HFE-7100) nanofluids on start-up and thermal characteristics of pulsating heat pipe	2023	https://doi.org/10.1007/s10973-022-11929-w	67
	Amir Yousuf Bhat, Adnan Qayoum	Synergistic impact of tube configuration and working fluid on photovoltaic-thermal system performance	2023	https://doi.org/10.1016/j.renene.2023.02.086	68
	Mohammad Kamran, Adnan Qayoum	Experimental investigation of natural convection of Fe3O4-water nanofluid in a cubic cavity	2023	https://doi.org/10.1080/01932691.2023.2173607	69
	Amir Yousuf Bhat, Adnan Qayoum	Performance enhancement of Photovoltaic-thermal system using hybrid tubes: An assessment of thermodynamic and thermohydraulic efficiencies	2023	https://doi.org/10.1016/j.applthermaleng.2023.120652	70
	Bisma ALI, Adnan QAYOUM, Shahid SALEEM, Fasil Qayoum MIR	Experimental investigation of nanofluids for heat pipes used in solar photovoltaic panels	2023		71
	Mohammed DILAWAR, Adnan QAYOUM	Simulation of vapour compression air conditioning system using Al2O3 based nanofluid refrigerant	2023	https://doi.org/10.18186/thermal.1377210	72
	Mohammed Dilawar, Adnan Qayoum	Performance analysis of R290/R600a–Al2O3 mixtures in household refrigerator	2023	https://doi.org/10.1007/s12046-023-02336-4	73
	Mohammed Dilawar, Adnan Qayoum	Performance evaluation of novel refrigerant mixtures in an air conditioning system using Al2O3 nanolubricant	2023	https://doi.org/10.1007/s10973-023-12471-z	74
	Amir Yousf Sofi, Adnan Qayoum	Numerical Investigation of Thermo-Hydraulic Performance and Irreversibility Behaviour in a Pulsating Turbulent Flow Ribbed Duct	2023	https://doi.org/10.1007/s13369-023-07902-w	75
	Mohammad KAMRAN, Adnan QAYOUM	Investigation of thermo-rheological properties of Fe3O4/Ethylene glycol nanofluid in a square cavity	2023	https://doi.org/10.18186/thermal.1377221	76
	Yellu KUMAR, Adnan QAYOUM, Shahid SALEEM, Fasil QAYOUM MIR	Combined effect of upstream ramp and effusion cooling in combustion chamber liners of gas turbine	2023	DOI: 10.18186/thermal.1283203	77
	Amir Yousuf Bhat, Adnan Qayoum	Viscosity of CuO nanofluids: Experimental investigation and modelling with FFBP-ANN	2022	https://doi.org/10.1016/j.tca.2022.179267	78
	Bisma Ali, Adnan Qayoum, Shahid Saleem, F.Q Mir	Synthesis and characterization of high-quality multi layered graphene by electrochemical exfoliation of graphite	2022	http://dx.doi.org/10.17515/resm2022.384na0121	79
	Mohammad Kamran, Adnan Qayoum	Effect of ZnO nanofluids on thermo-hydraulic characteristic of flow in a heated duct	2022	https://doi.org/10.1080/15567036.2022.2154871	80
	Masrat Bashir, Adnan Qayoum, Sheikh Shahid Saleem	Effect of banana peel powder on the fade and recovery of brake friction material	2022	https://doi.org/10.1007/s11837-022-05223-1	81
	Mohammed Dilawar, Adnan Qayoum	Performance study of aluminium oxide based nanorefrigerant in an air-conditioning system	2022	http://dx.doi.org/10.17515/resm2022.459ma0701	82
	Amir Yousf Sofi, Adnan Qayoum	Heat Transfer and Fluid Flow Characteristics in a Two Pass Duct with Variable Rib Shapes: A CFD Analysis	2022	https://doi.org/10.1007/978-981-99-6343-0_35	83
	Amir Yousuf Bhat, Adnan Qayoum	Thermohydraulic Performance of a Photovoltaic Thermal System Using CuO/EG Nanofluid	2022	https://doi.org/10.1007/978-981-99-7047-6_8	84
	K R Yellu Kumar, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir	Effect of blowing ratio on adiabatic effectiveness for effusion cooling in gas turbine combustor liners	2022	http://dx.doi.org/10.17515/resm2022.359me1028	85
	Ayaz Ahmed, Adnan Qayoum, Fasil Qayoom Mir	Spectroscopic studies of renewable insulation materials for energy saving in building sector	2021	https://doi.org/10.1016/j.jobe.2021.103300	86

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. N. A. Sheikh	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Erosion Behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 Coated Mild Steel	2023	https://doi.org/10.1007/s11665-022-07657-9	87
	Ali Imran Ansari, Nazir Ahmad Sheikh	Simulation and Experimental Assesment of acrylonitrile butadiene styrene polymer based new lattice design	2023	https://doi.org/10.1007/s40032-023-00928-x	88
	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Tribo-corrosion behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2 coated mild steel	2023	https://doi.org/10.1016/j.arabjc.2023.104648	89
	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Wear and Corrosion Behavior of Zn-Ni-Cu and Zn-Ni-Cu-TiB2-Coated Mild Steel	2023	https://doi.org/10.1007/s11665-023-07801-z	90
	Ali Imran Ansari, Nazir Ahmad Sheikh	Biocompatible Scaffold Based on Silk Fibroin for Tissue Engineering Applications	2023	https://doi.org/10.1007/s40032-022-00891-z	91
	S Ahmad, R House, DL Holness, R Nisenbaum, AMS Thompson	Evaluation of neurological testing for hand–arm vibration syndrome	2023	https://doi.org/10.1093/occmed/kqac137	92
	Ali Imran Ansari, Nazir Ahmad Sheikh	A Review on Different Approaches for Foam Fabrication	2023	https://doi.org/10.1007/s40032-023-00998-x	93
	Ali Imran Ansari, Nazir Ahmad Sheikh	A Review on Materials Application in Scaffold Design by Fused Deposition Method	2023	https://doi.org/10.1007/s40032-023-00988-z	94
	Ali Imran Ansari, Nazir Ahmad Sheikh, Navin Kumar	Simulation and experimental energy absorption behavior of ABS-M30i-based three distinct lattice structures fabricated by polymer 3D printer	2023	https://doi.org/10.1007/s40430-023-04428-y	95
	Ali Imran Ansari, Nazir Ahmad Sheikh, Navin Kumar	Energy-Absorbing Characteristics of an ABS-M30i-based 3D-Printed Periodic Surface and Strut-Based Lattice Structure	2023	https://doi.org/10.1007/s40032-023-00984-3	96
	Ali Imran Ansari, Nazir Ahmad Sheikh	Modeling and Simulation of Scaffolds in Varied Conditions Using CAD and Medical Images	2023	https://doi.org/10.1007/s40032-023-00960-x	97
	Ajaz Ali, Sheikh Nazir Ahmad	Effect of Temperature on Hard TiB2-Al2O3-Ti Coatings Deposited Using Electron Beam Physical Vapor Deposition	2023	https://doi.org/10.1007/s11665-022-07414-y	98
	M Chandarana, VL Sateesh, NA Sheikh, GN Dayananda	Vibration Control of a Smart Composite Plate with Damaged Substrate	2023	https://doi.org/10.1007/s42417-022-00586-w	99
	Ajaz Ali, Sheikh Nazir Ahmad	Mechanical and tribological behavior of TiB2/Al2O3 coating on high-speed steel using electron beam deposition	2022	https://doi.org/10.1016/j.triboint.2022.107681	100
	Sheikh Idrees Ali, Sheikh Nazir Ahmad	Corrosion behaviour OF HVOF deposited Zn–Ni–Cu and Zn–Ni–Cu–TiB2 coatings on mild 102steel	2022	https://doi.org/10.1515/corrrev-2021-0082	101
	Ali Imran Ansari, Nazir Ahmad Sheikh	A Review of Bone Regeneration Mechanisms and Bone Scaffold Fabrication Techniques (Conventional and Non-Conventional)	2022	https://doi.org/10.1007/s40032-022-00880-2	102
	Ali Imran Ansari, Nazir Ahmad Sheikh	Bone Tissue Regeneration: Rapid Prototyping Technology in Scaffold Design	2022	https://doi.org/10.1007/s40032-022-00872-2	103
	Yunis Ahmad Dar, Nazir Ahmad Sheikh	A review of fabrication and properties of spark plasma sintered tungsten carbide based advanced composites	2022	https://doi.org/10.1177/09544089211051590	104
	Kaleem Ahmad Najar, Sheikh Nazir Ahmad, MA Shah, Zahid Mushtaq, Sobura Altaf	A dual-layer approach for enhancing the tribological and machining performance of carbide tools in dry turning of mild-steel alloy	2022	https://doi.org/10.1504/IJMMM.2022.122784	105
	Ansari Ali Imran Habib, Nazir Ahmad Sheikh	3D printing review in numerous applications for dentistry	2022	https://doi.org/10.1007/s40032-022-00810-2	106
	Rizwan Ul Haq, Umashankar Kumar, Naveen Kumar, Yash Baranwal, Mohd Mursaleen, Nazir Ahmad Sheikh	Design and manufacturing of low cost SCARA robot	2021		107

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. M.M. Wani	Singh G, Wani MF, Wani MM	A comparative investigation on tribological properties of piston ring / cylinder liner tribo-pair using GNP and GNF dispersed lubricants Order a copy of this article,	2022	DOI: 10.1504/IJSURFSE.2022.10051381	108
	Singh G, Wani MF, Wani MM	Fuel energy Saving in SI engines using Graphene and Graphite as Nano additive: A comparative study.	2021	https://doi.org/10.1007/s13204-021-02298-1	109
	Singh G, Wani MF, Wani MM	Tribological evaluation of piston/cylinder linear assembly in automotive engines using GNP as a lubricant additive	2021		110
	Singh G, Wani MF, Wani MM	An Experimental Study on Fuel Energy Saving in Gasoline Engines Using GNP as a Lubricant Additive	2021	https://doi.org/10.1177/14680874211039688	111

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Prof. Babar Ahmad	Tariq Ahmad, Noor Zaman Khan, Arshad Noor Siddiquee, Babar Ahmad	Investigations on surface properties and surface morphology in dissimilar joining of WE43 and AA-7075 alloy	2024	https://doi.org/10.1016/j.triboint.2024.109302	112
	Mohammad Ashraf Mir, Sheikh Shahid Ul Islam, Noor Zaman Khan, Babar Ahmad, Arshad Noor Siddiquee	Effect of processing parameters on microstructure and tensile strength of stainless steel	2024		113
	Shahid Manzoor wani,Babar Ahmad,Sheikh Shahid Saleem	Nano-mechanical and nano-tribological characterization of Ni-Co-BN nano-composite coating for bearing applications	2023	https://doi.org/10.1016/j.triboint.2023.108281	114
	Omar Hussain, Babar Ahmad, Sheikh Shahid Saleem	Biomaterials for artificial knee joint replacement: a review	2023	https://doi.org/10.1504/IJMATEI.2023.130129	115
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad, Vinayak Malik	Effect of process parameters on surface composite fabrication of newly commercialized Mg-ZE41 alloy by friction stir processing (FSP): microstructural development and microhardness	2023		116
	Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem	Nanomechanical and Nanotribological Characterization of Co-BN Nano-composite Coating on Al-Si Substrate	2023		117
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Mechanical, Wear, and Corrosion Properties Investigation of ZE41/TiB2 Surface Composites Fabricated by Friction Stir Processing	2022	https://doi.org/10.1115/1.4054872	118
	Suhail Ganiny, Majid H Koul, Babar Ahmad	Analysis of Limit Cycle Oscillations in Dual-rate Haptic Rendering: Effect of Dual-rate Sampling	2022	https://doi.org/10.1016/j.ifacol.2022.04.107	119
	Suhail Ganiny, Majid H Koul, Babar Ahmad	Identification of the most conservative stability bounds for a class of multi-rate haptics controllers	2022	https://doi.org/10.1504/IJMIC.2022.128311	120
	SA Manroo, NZ Khan, B Ahmad	Study on surface modification and fabrication of surface composites of magnesium alloys by friction stir processing: a review	2022		121
	Omar Hussain, Babar Ahmad, Shahid Saleem	Analysis of tribological behavior of medical-grade UHMW polyethylene under dry and lubricated conditions with human body fluids using Taguchi and GRA techniques	2022	https://doi.org/10.1177/0892705720941907	122
	Diyan ul Imaan, Fasil Qayoom Mir, Babar Ahmad	In-situ preparation of PSSA functionalized ZWP/sulfonated PVDF composite electrolyte as proton exchange membrane for DMFC applications	2022	https://doi.org/10.1016/j.ijhydene.2021.12.199	123
	Omar Hussain, Shahid Saleem Sheikh, Babar Ahmad	Fabrication and tribological behavior of novel UHMWPE/vitamin-C/graphene nanoplatelets based hybrid composite for joint replacement	2022		124
	Suhail Ahmed, Manroo, Vinayak Malik, Babar Ahmad	Surface moderation and composite fabrication of die-cast magnesium alloys via friction stir processing: a review	2022	https://doi.org/10.1080/2374068X.2021.1970998	125
	Omar Hussain, Babar Ahmad, Shahid Saleem Sheikh	Biotribological performance of medical-grade UHMW polyethylene-based hybrid composite for joint replacement	2021	https://doi.org/10.1177/09673911211058088	126
	Suhail Ganiny, Majid H Koul, Babar Ahmad	Time-delayed dual-rate haptic rendering: stability analysis and reduced order modeling	2021		127

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Mohammad Hanief	Mohammad Hanief, Hashim Khursheed, M.s. Charoo, M.Zubair	Investigation of Lubrication Characteristics of virgin and additive blended Jatropha based grease	25/09/2023	DOI: 10.24874/ti.1471.04.23.09	128
	M. Hanief*, K. Zaman, S. Ul Bashir, J. Showkat, M. Zubair	Investigation on cypress wood membrane for water filtration	Jan 2022	DOI: 10.34049/bcc.53.D.10	129
	Asaf Hanief Kohli, M Hanief, Vishal Jagota	A retrospection of the effect of nitriding processes on the AISI H13 tool steel	Apr 2023	https://doi.org/10.1080/2374068X.2022.2093012	130
	Zahid Maqbool, M.hanief , Malik Parveez	Review on performance enhancement of phase change material based heat sinks in conjugation with thermal condultivity enhancers for electronic cooling	2023	https://doi.org/10.1016/j.est.2022.106591	131
	Mir Mohsin John, M. Hanief	Frictional noise mitigation using synergetic approach of laser surface texturing and bio-lubrication	2022	https://doi.org/10.1016/j.triboint.2022.108056	132
	Mir Mohsin John, M. Hanief,Suhail ganiny	Predictive modelling of pump noise using multi-linear regression and random-forest models - via optimal data splitting	January 11, 2023	https://doi.org/10.1504/IJSPM.2022.128274	133
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Experimental assessment of recycling methods of used engine oil for sustainable environment	10 May 2022	http://dx.doi.org/10.17515/resm2022.385ma0113	134
	Zahid mushtaq, M.hanief	Tribological investigation of molybdenum disulphide nanoparticles and graphene nanoflakes as lubricant additives in Karanja oil	2022	https://doi.org/10.1504/IJSURFSE.2022.124011	135
	Zahid Maqbool, M.hanief , Malik Parveez	Effect of CuO-GnP binary mixture on thermal properties of organic PCM	Nov 2023	https://doi.org/10.1016/j.matlet.2023.135118	136
	Zahid Maqbool, M.hanief ,	Influence of materials hardness and operating parameters on the surface roughness during reciprocating sliding	Nov 2021		137
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Condition monitoring of used engine oil by FTIR spectroscopy- A Review	Dec 2021		138
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Critical retrospection and evaluation of waste engine oil recycling methods	2023		139
	Afreen Nisar, M. Hanief, Fasil Qayoom Mir	Recycling of waste lubricating oil using ultra filtration membrane and modelling of its rehelogical behaviour using guass-newton algorithim	2023		140
	Mir Mohsin John, M. Hanief	Modeling frictional noise using artificial neural network and regression	2023		141
	Mohammad Hanief, wani khalid, Fozia Akhter, M.s. Charoo, M.Zubair	Effect of saturated fatty acids on the antiwear and rheological properties of olive oil	2023		142

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. M. S. Charoo	Pranav Dev Srivyas, MF Wani, Rakesh Sehgal, Chandra Shekhar Singh Bisht, MS Charoo, Ankush Raina, Mir Irfan Ul Haq	Synergetic effect of surface texturing and graphene nanoplatelets on the tribological properties of hybrid self-lubricating composite	2022	https://doi.org/10.1016/j.triboint.2022.107434	143
	Mehak Nisar, MS Charoo	Optimization of fretting wear parameters and effect of high temperature on fretting wear behavior of Al6061 alloy and Al6061-SiC composite	2022	https://doi.org/10.1007/s12633-021-01172-7	144
	Wani Khalid Shafi, MS Charoo	An experimental study on the effect of concentration of green nanoadditives on the tribological properties of the biolubricants	2022	https://doi.org/10.1177/09544062211042046	145
	Shariq Ahmad Bhat, MS Charoo	Rheological characteristics of coconut grease with graphene nanoplatelets	2022	https://doi.org/10.1007/s13399-021-02118-0	146
	Pranav Dev Srivyas, MS Charoo, Tanmoy Medhi, Shariq Ahmad Bhat,	Tribological behaviour of rice bran and sesame greases using h-BN and CuO particles	2023		147
	Mehak Nisar, MS Charoo	A Comparative Analysis of Corrosion Performance of Piston Alloy and Its Composite in Marine, Mining and Basic Environments	2022	https://doi.org/10.1007/s40735-022-00645-5	148
	Shariq Ahmad Bhat, MS Charoo	Rheological and tribological properties of rice bran oil grease (RBOG) with h-BN nanoparticles-An experimental study	2022		149
	Mehak Nissar M.S. Charoo, Fozia Akhter, Muhammad Hanief, Wani Khalid Shafi	Effect of Saturated Fatty Acids on the Antiwear and Rheological Properties of Olive Oil	2023	Doi;10.24874/ti.1404.11.22.02	150
	Pankaj Verma, MS Charoo, Pranav Dev Srivyas, Tanmoy Medhi	Enhanced extreme pressure and tribological performance of hybrid nano lubricant	2023	https://doi.org/10.1080/17515831.2023.2235230	151
	Mehak Nisar and Mohammad Shafi Charoo	Tribological investigations on piston alloy based hybrid nano composite and GGG40 spheroidal cast iron under reciprocating dry sliding conditions	2023	https://doi.org/10.1177/09544062231225020	152
	Shariq Ahmad Bhat, MS Charoo	Formulation and rheology of bio-grease mixed with h-BN nanoparticles	2021		153

Name of the faculty member	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Saad Parvez	Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez	Friction based solid state welding–A review	2022-1-1	https://doi.org/10.1016/j.matpr.2022.01.457	154
	Fayaz Ahmad Mir, Noor Zaman Khan, Saad Parvez, Arshad Noor Siddiquee	Investigations on surface properties of friction stir welded dissimilar AA2024-T3 and 304 stainless steel joints	2024-1	https://doi.org/10.1016/j.triboint.2024.109312	155
	and Saad Parvez Fayaz Ahmad Mir, Noor Zaman Khan	Effect of tool–pin offset on microstructure, mechanical properties, and corrosion behavior of friction stir welded AA2024-T3 and SS304 dissimilar joints	2023-11	https://doi.org/10.1177/14644207231217479	156
	Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez	Joining of aluminium matrix composites using friction stir welding: A review	2022-5	https://doi.org/10.1177/14644207211069616	157

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Sheikh Shahid Saleem	Hussain, O., Ahmad, B., & Sheikh, S.	Biotribological performance of medical-grade UHMW polyethylene-based hybrid composite for joint replacement. Polymers And Polymer Composites, 29(9_suppl), S1424-S1431.	Nov 2021	https://doi.org/10.1177/09673911211058088	158
	Masrat Bashir, Adnan Qayoum and Shahid Saleem	Effect of Banana Peel Powder on the Fade and Recovery of Brake Friction Material. JOM (2022).	15-03-2022	https://doi.org/10.1007/s11837-022-05223-1	159
	K R Yellu Kumar, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir	Effect of blowing ratio on adiabatic effectiveness for effusion cooling in gas turbine combustor liners, Res. Eng. Struct. Mat., 8(3), pp. 431–445,	Mar 2022	http://dx.doi.org/10.17515/resm2022.359me1028	160
	Umair Ashraf, Shahid Saleem, Jebran Khan,	Influence of temperature on the tribo-performance of GGG-60 seat insert against 23–8 N exhaust valve steel, Materials Today: Proceedings, Volume 66, Part 2, 2022, Pages 573-579,	June 2022	https://doi.org/10.1016/j.matpr.2022.06.175	161
	Bisma Ali, Adnan Qayoum, Shahid Saleem, Fasil Qayoom Mir,	Synthesis and characterization of high-quality multi layered graphene by electrochemical exfoliation of graphite, Res. Eng. Struct. Mat. 8 (3) (2022), 447-462,	2022	http://dx.doi.org /10.17515/resm2022.384na0121	162
	Ali, B., Qayoum, A., Saleem, S. et al.	Effect of graphene/hydrofluoroether (HFE-7100) nanofluids on start-up and thermal characteristics of pulsating heat pipe. J Therm Anal Calorim (2023). 148(9), pp. 3819–3834,	2023	https://doi.org/10.1007/s10973-022-11929-w	163
	Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem,	Nano-mechanical and nano-tribological characterization of Ni-Co-BN nano-composite coating for bearing applications., Tribology International, February 2023, Volume 180, 108281	February 2023	https://doi.org/10.1016/j.triboint.2023.108281.	164
	Shahnaz Bashir, Mohammad Jebran Khan, MF Wani, S Shahid Saleem, Mir Mohsin John, Qazi Junaid Ashraf, Tabin Nissar,	Extreme pressure properties of garlic oil: comparative investigations with PAO4 base oil and PAO/garlic oil blend, Engineering Research Express, 5 (2023) 015057,	2023	DOI 10.1088/2631-8695/acb5e2	165
	Kumar, Y., Qayoum, A., Saleem, S., Mir, F.Q.	Combined effect of upstream ramp and effusion cooling in combustion chamber liners of gas turbine, Journal of Thermal Engineering, 2023, 9(2), pp. 297–312.	2023	DOI 10.18186/thermal.1283203	166
	MF Wani, Umida Ziyamukhamedova, Taseer A Mufti, Rakesh Sehgal, Sheikh S Saleem	Design, fabrication and characterization of MoS2 self-lubricating pure MoS2 Coatings for space applications using PVD magnetron sputtering, E3S Web of Conferences 401, 05084 (2023),	11 July 2023	https://doi.org/10.1051/e3sconf/202340105084	167
	MF Wani, Umida Ziyamukhamedova, Taseer A Mufti, Rakesh Sehgal, Sheikh S Saleem	Fabrication and characterization of RF magnetron sputtered composite MoS2 and ZrN coatings on Ti3SiC2 max phase for space applications,E3S Web of Conferences 401, 05083 (2023),	11 July 2023	https://doi.org/10.1051/e3sconf/202340105083	168
	Shahid Manzoor Wani, Babar Ahmad, Sheikh Shahid Saleem	Nanomechanical and Nanotribological Characterization of Co-BN Nano-composite Coating on Al-Si Substrate. J. of Materi Eng and Perform (2023).	2023-9-15	https://doi.org/10.1016/j.triboint.2023.109194.	169
	Sheikh Haris Mukhtar, Ahraf Gulzar, Shahid Saleem, MF Wani, Rakesh Sehgal, AA Yakovenko, IG Goryacheva, Mukund Dutt Sharma	Advances in development of solid lubricating MoS2 coatings for space applications: A review of modeling and experimental approaches, Tribology International, Volume 192, 2024, 109194,	2023-12-14	https://doi.org/10.1016/j.triboint.2023.109194.	170
	Narayana Turali, Sheikh Shahid Saleem	Synergetic effect of oleophilic textured surfaces and MoS2 on the tribological properties of Ti-6Al-4V alloy under dry and lubricated sliding conditions, 2024, Surf. Topogr.: Metrol. Prop. 12 015008	2024-1-29	10.1088/2051-672X/ad237e	171
	Narayana Turali, Sheikh Shahid Saleem	Comparative Investigation and Characterization of The Nano-Mechanical and Tribological Behavior of RF Magnetron Sputtered TiN, CrN, and TiB2 Coating on Ti6Al4V Alloy, Tribology International, Volume 193, 2024, 109348	2024-2-1	https://doi.org/10.1016/j.triboint.2024.109348.	172
	Narayana Turali, Sheikh Shahid Saleem	Enhancing Fretting Wear Behavior of Ti64 Alloy: The Impact of Surface Textures and CrN-MoS2-Ag Composite Coating, Tribology International, Volume 193, 2024, 109346,	2024-2-1	https://doi.org/10.1016/j.triboint.2024.109346.	173

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Mohammad Mursaleen	Meruva Manikanteswara Reddy, Mohammad Sarfaraz ahanger, Shubham Sharma,Dasari Tharun,Mohammad Mursaleen	Design and analysis of composite leaf spring under static loading	2021	https://doi.org/10.21467/abstracts.108	174
	Shamas U Din Hajam and Mohammad Mursaleen	Design and Analysis of An Automotive Single Plate Friction Clutch Using Different Materials	2021	https://doi.org/10.21467/abstracts.108	175
	Mohammad Mursaleen Butt, Kaleem Ahmad Najar, Towseef Hussain Dar	Experimental evaluation of multilayered CVD- and PVD-coated carbide turning inserts in severe machining of AISI-4340 steel alloy	2021		176
	Rizwan Ul Haq, Umashankar Kumar, Naveen Kumar, Yash Baranwal, Mohd Mursaleen, Nazir Ahmad Sheikh	Design and Manufacturing of Low Cost SCARA Robot	2021		177
	Avinash,M Mursaleen,Navin Kumar	Nanomechanical properties of human hair using AFM, nanoindentation,SEM and EDX	2021		178
	Misba Jan, Mohammad Mursaleen Butt, and Mohammad Muzaffarul Hassan	Fluid flow characteristics and heat transfer performance in microchannel heat sinks: A review	2022	https://doi.org/10.1177/09544089221142436	179
	Raj Kumar, Mohammad Mursaleen, G. A. Harmain & Ashutosh Kumar	A Critical Review of Fatigue Life Prediction on 316LN SS	2023	https://doi.org/10.1007/978-981-19-6107-6_30	180

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Noor Zaman Khan	Fayaz Ahmad Mir,Noor Zaman Khan, Saad Parvez, Arshad Noor Siddiquee,	Investigations on surface properties of friction stir welded dissimilar AA2024-T3 and 304 stainless steel joints, Tribology International,Volume 193, 2024, 109312	2024	https://doi.org/10.1016/j.triboint.2024.109312.	181
	Tariq Ahmad,Noor Zaman Khan, Arshad Noor Siddiquee, Babar Ahmad,	Investigations on surface properties and surface morphology in dissimilar joining of WE43 and AA-7075 alloy, Tribology International, Volume 192, 109302 .	17-01-2024	https://doi.org/10.1016/j.triboint.2024.109302	182
	Annayath Maqbool, Noor Zaman Khan	Microstructure and corrosion behavior of thermo-mechanically processed rare earth Mg alloy: Effect of friction stir processing, Materials Letters,Volume 359,135934,	13-01-2024	https://doi.org/10.1016/j.matlet.2024.135934.	183
	Sheikh Shahid Ul Islam,Noor Zaman Khan, Mohammad Mohsin Khan, and Arshad Noor Siddiquee	Steel heat treatment: Equipment and process design. Reference Module in Materials Science and Materials Engineering, Elsevier, 2024	01-11-2024	https://doi.org/10.1016/B978-0-323-96020-5.00249-1	184
	AN Siddiquee, N Gangil, D Bajaj, SMAK Mohammed, DL Chen	Autogenous Dissimilar Welding of Copper-to-Stainless Steel via Electron Beam Welding: A Novel Strategy for Achieving Defect-Free Joints. Metall Mater Trans A 55, 635–651 (2024).	28-12-2023	https://doi.org/10.1007/s11661-023-07274-8	185
	Mohammad Owais Qidwai, Irfan Anjum Badruddin, Sarfaraz Kamangar, Mohammad Anas Khan & Mohammad Nawaz Khan	Heat transfer enhancement in multijet micropin fin heat sink, Numerical Heat Transfer, Part A: Applications, pp:1-20	27-12-2023	DOI: 10.1080/10407782.2023.2294349	186
	Mir FA, Noor Zaman Khan Siddiquee AN, Parvez S.	Effect of tool–pin offset on microstructure, mechanical properties, and corrosion behavior of friction stir welded AA2024-T3 and SS304 dissimilar joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2023;0(0).	29/11/2023	https://doi:10.1177/14644207231217479	187
	Annayath Maqbool	Fabrication and characterization of hybrid WE43 Mg alloy-based composite by friction stir processing with improved ductility, Volume 215, September 2023, 112273	09-06-2023	https://doi.org/10.1016/j.vacuum.2023.112273	188
	Mohd Rafiq Parray, , Suhail Ahmed Manroo, Annayath Maqbool	Experimental investigation on fabrication and characterisation of Mg-Al2O3 surface composites, Advances in Materials and Processing Technologies	01-04-2023	https://doi.org/10.1080/2374068X.2023.2198824	189
	Annayath Maqbool, Nadeem Fayaz Lone, Tariq Ahmad, Arshad Noor Siddiquee	Effect of hybrid reinforcement and number of passes on microstructure, mechanical and corrosion behavior of WE43 Mg alloy based metal matrix composite, Journal of Manufacturing Processes, Volume 89, 3 March 2023, Pages 170-181	02-02-2023	https://doi.org/10.1016/j.jmapro.2023.01.070	190
	Azhar Equbal, Sarfaraz Masood, Iftekhar Equbal, Shafi Ahmad, Noor Z Khan, Zahid A Khan	Artificial intelligence against COVID-19 Pandemic: A Comprehensive Insight, Current medical imaging, Volume 19, Number 1, 2023, pp. 1-18(18)	01-01-2023	https://doi.org/10.2174/1573405617666211004115208	191
	Shafi Ahmad, Sarfaraz Masood, Noor Zaman Khan, Irfan Anjum Badruddin, Ali Ahmadian, Zahid A Khan, Amil Hayat Khan	Analysing the impact of COVID-19 pandemic on the psychological health of people using fuzzy MCDM methods, Operations Research Perspectives, Volume 10, 2023, 100263	22-12-2022	https://doi.org/10.1016/j.orp.2022.100263	192
	Annayath Maqbool, Noor Zaman Khan, Arshad Noor Siddiquee, Irfan Anjum Badruddin, Mohamed Hussien, Mohammed Imran Khan	Overcoming challenges in using magnesium-based materials for industrial applications using friction-stir engineering, Materials Science and Technology, Volume 39, Issue 9	22-10-2022	https://doi.org/10.1080/02670836.2022.2158539	193
	Tariq Ahmad, Noor Zaman Khan, Mohammad Mohsin Khan, Nadeem Fayaz Lone, Arshad Noor Siddiquee, Babar Ahmad, Shafi Ahmad, Zahid A Khan, Sheikh Shahid Ul Islam	Fabrication and machinability study of Zn-Al-TiC composite using wire EDM with different dielectric media, Advances in Materials and Processing Technologies, Volume 9, 2023 - Issue 3, Pages 1340-1355	26-08-2022	https://doi.org/10.1080/2374068X.2022.2116878	194
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Mechanical, Wear, and Corrosion Properties Investigation of ZE41/TiB2 Surface Composites Fabricated by Friction Stir Processing, Journal of Manufacturing Science and Engineering, 144(11): 111010 (9 pages)	06-07-2022	https://doi.org/10.1115/1.4054872	195
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad, Vinayak Malik	Effect of process parameters on surface composite fabrication of newly commercialized Mg-ZE41 alloy by friction stir processing (FSP): microstructural development and microhardness, World Journal of Engineering, Vol. 20 No. 5, pp. 857-867.	25-04-2022	https://doi.org/10.1108/WJE-12-2021-0660	196
	Mouminah Amatullah, Mehwish Jan, Munazah Farooq, Afra Saeed Zargar, Annayath Maqbool	Effect of Tool Rotational Speed on the Friction Stir Welded Aluminum Alloys: a Review, Materials Today: Proceedings, Volume 62, Part 1, 2022, Pages 245-250	18-03-2022	https://doi.org/10.1016/j.matpr.2022.03.220	197
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Study on surface modification and fabrication of surface composites of magnesium alloys by friction stir processing: a review, Journal of Engineering and Applied Science, 69, Article number: 25 (2022)	10-03-2022	https://doi.org/10.1186/s44147-022-00073-9	198
	Lubaid Nisar, Aasif Nazir Thoker, Asma Sanjum, Mohd Rafiq Parray, Suhail Ahmed Manroo	Defects analysis in friction stir processing of magnesium-based surface composites, Materials Today: Proceedings. , 2022, Pages 158-162	09-03-2022	https://doi.org/10.1016/j.matpr.2022.02.611.	199
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Development of Nano-Composites on Rare-Earth Mg-ZE41 Alloy Via Friction Stir Processing (FSP): Microstructure, Mechanical, and Tribological Properties, JOM, Volume 74, pages 2047–2062,	04-03-2022	https://doi.org/10.1007/s11837-022-05211-5	200
	Fayaz Ahmad Mir, Arshad Noor Siddiquee, Saad Parvez	Friction based solid state welding–A review, Materials Today: Proceedings, Volume 62, Part 1, 2022, Pages 55-62	10-02-2022	https://doi.org/10.1016/j.matpr.2022.01.457	201
	Md Nadeem Alam, Arshad Noor Siddiquee, Zahid A Khan, Noor Zaman Khan	A comprehensive review on wire EDM performance evaluation, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 236, Issue 4	24-01-2022	https://doi.org/10.1177/09544089221074843	202
	Fayaz Ahmad Mir, Noor Zaman Khan, Arshad Noor Siddiquee, Saad Parvez	Joining of aluminium matrix composites using friction stir welding: A review, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Volume 236, Issue 5	19-01-2022	https://doi.org/10.1177/14644207211069616	203
	Suhail Ahmed Manroo, Noor Zaman Khan, Babar Ahmad	Effect of Nano-ZrO2 Additions on Fabrication of ZrO2/ZE41 Surface Composites by Friction Stir Processing, Transactions of the Indian Institute of Metals, 75, 1181–1194	16-01-2022	https://doi.org/10.1007/s12666-021-02473-6	204
	Tariq Ahmad, Babar Ahmad, Annayath Maqbool	Recent advances in machining of composites and super alloys by using wire-EDM. A Review, Recent Advances in Manufacturing, Automation, Design and Energy Technologiespp pp115–123	12-10-2021	https://doi.org/10.1007/978-981-16-4222-7_13	205
	Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A Khan, Irfan Anjum Badruddin, Sarfaraz Kamangar, Annayath Maqbool	Improvement in joint efficiency with high productivity and narrow weld formation in friction stir welding, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 236, Issue 2	20-09-2021	https://doi.org/10.1177/09544089211042480	206
	Mohammad Owais Qidwai, Irfan Anjum Badruddin, Mohammad Anas Khan, Saad Alshahrani	Optimization of Microjet location using Surrogate Model coupled with Particle Swarm Optimization Algorithm, Mathematics, 9(17), 2167	05-09-2021	https://doi.org/10.3390/math9172167	207
	Annayath Maqbool, Arshad Noor Siddiquee	Towards Mg based light materials of future: Properties, applications, problems and their mitigation, Journal of Manufacturing Science and Engineering, 144(3): 030801 (18 pages)	17-08-2021	https://doi.org/10.1115/1.4051678	208
	Sameera Mufazzal, SM Muzakkir, Arshad Noor Siddiquee, Zahid A. Khan	A new fuzzy multi-criteria decision-making method based on proximity index value, Journal of Industrial and Production Engineering, 39:1, 42-58	07-08-2021	https://doi.org/10.1080/21681015.2021.1958935	209

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Harveer Singh Pali	Ashish Kumar Singh, Harveer Singh Pali, Mohammad Mohsin Khan	Response surface optimization approach to enhance the performance of diesel engine using ternary blends of biobutanol and biodiesel doped with ZnO nanoparticles, Energy Conversion and Management, Volume 300.	15 January 2024	10.1016/j.enconman.2023.117899	210
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effective utilization of waste plastic derived fuel in CI engine using multi objective optimization through RSM, FuelO, Volume 355.	1 January 2024	10.1016/j.fuel.2023.129448	211
	Harveer Singh Pali, Abhishek Sharma, Naveen Kumar, Yashvir Singh	Optimization of long-term storage stability of Kusum biodiesel using herbal anti-oxidant, Biomass Conversion and Biorefinery, Volume 14, Issue 2, Pages 1959 - 1973.	January 2024	10.1007/s13399-022-02444-x	212
	Akash Dwivedi, Mohammad Mohsin Khan, Harveer Singh Pali	A comprehensive review of thermal enhancement techniques in microchannel heat exchangers and heat sinks, Journal of Thermal Analysis and Calorimetry, Volume 148, Issue 23, Pages 13189 - 13231.	December 2023	10.1007/s10973-023-12451-3	213
	Mohd Mujtaba Ahmed, Harveer Singh Pali, Mohammed Mohsin Khan.	Experimental analysis of diesel/biodiesel blends with a nano additive for the performance and emission characteristics of CI Engine, International Journal of Engine Research, Volume 24, Issue 11, Pages 4500 - 4508.	November 2023	10.1177/14680874221132958	214
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effect of injection timing of waste plastic oil and its blends on CRDI diesel engine, International Journal of Engine Research, Volume 24, Issue 11, Pages 4490 - 4499.	November 2023	10.1177/14680874221119131	215
	Abhishek Sharma, Harveer Singh Pali, Manish Kumar, Nishant Kumar Singh, Yashvir Singh, Deepak Singh	Study the effect of optimized input parameters on a CRDI diesel engine running with waste frying oil methyl ester-diesel blend fuel with ZnO nanoparticles: a response surface methodology approach, Biomass Conversion and Biorefinery, Volume 13, Issue 14, Pages 13127 - 13152.	September 2023	10.1007/s13399-021-02158-6	216
	Yashvir Singh, Harveer S Pali, Nishant K Singh, Abhishek Sharma, Amneesh Singla	Effect of nanoparticles as additives to the biofuels and their feasibility assessment on the engine performance and emission analysis—A review, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 237, Issue 2, Pages 492 - 510.	April 2023	10.1177/09544089221109723	217
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	A comprehensive review on the production of alternative fuel through medical plastic waste, Sustainable Energy Technologies and Assessments, Volume 55.	February 2023	10.1016/j.seta.2022.102924	218
	R.H. Vali, H.S. Pali, M.M. Ahmed, A.K. Singh, A. Kumar, A. Sharma	Predictive modelling through RSM for diesel engine using Al2O3 nanoparticles fuel blends	2023	10.1007/s13762-023-05317-6	219
	Harveer Singh Pali, Abhishek Sharma, Manish Kumar, Vivek Anand Annakodi, Van Nhanh Nguyen, Nishant Kumar Singh, Yashvir Singh, Dhinesh Balasubramanian, Balakrishnan Deepanraj, Thanh Hai Truong, Phuoc Quy Phong Nguyen	Enhancement of combustion characteristics of waste cooking oil biodiesel using TiO2 nanofluid blends through RSM, Fuel, Volume 331	1 January 2023	10.1016/j.fuel.2022.125681	220
	R. Hussain Vali, Anh Tuan Hoang, M. Marouf Wani, Harveer Singh Pali, Dhinesh Balasubramanian, Müslüm Arici, Zafar Said, Xuan Phuong Nguyen.	Optimization of variable compression ratio diesel engine fueled with Zinc oxide nanoparticles and biodiesel emulsion using response surface methodology, Fuel, Volume 323.	1 September 2022	10.1016/j.fuel.2022.124290	221
	Abhishek Sharma, Harveer Singh Pali, Manish Kumar, Nishant Kumar Singh, Erween Abd Rahim, Yashvir Singh, Naveen Kumar Gupta.	Effect of α-aluminium oxide nano additives with Sal biodiesel blend as a potential alternative fuel for existing DI diesel engine, Energy and Environment.	2022	10.1177/0958305X221133257	222
	Harveer Singh Pali, Abhishek Sharma, Naveen Kumar, Yashvir Singh.	Biodiesel yield and properties optimization from Kusum oil by RSM, Fuel, Volume 291	1 May 2021	10.1016/j.fuel.2021.120218	223
	Ashish Kumar Singh, Harveer Singh Pali, Mohammad Mohsin Khan	Performance and emission analysis of waste animal fat methyl esters blends on naturally aspirated single cylinder engine, Journal of Engineering Research (Kuwait), Volume 9	2021	10.36909/jer.ICCEMME.15833	224

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Abhijit Dey	Basant Lal, Abhijit Dey, Mohamamd Farooq Wani	Influence of TiCp ceramic reinforcement on Ti6Al4V alloy matrix via spark plasma sintering technique,	2024	https://doi.org/10.1080/2374068X.2024.2307304	225
	Khursheed Ahmad Sheikh, Mohammad Mohsin Khan, Abhijit Dey	Comprehensive Analysis of TiC-Reinforced ZA-37 Alloy Matrix Composites: Microstructural, Hardness, and Corrosion Performance	2024	https://doi.org/10.1007/s40735-024-00823-7	226
	Basant Lal, Abhijit Dey	Fretting wear characteristics of Ti6Al4V/TiC nano composites Using Response Surface Method	2024	https://doi.org/10.1016/j.triboint.2024.109412	227
	H. K. Mahilary. Dey A.	Preparation and application of carboxylated and mechanically attrited carbon for adsorptive removal of crystal violet dye.	2023	DOI https://doi.org/10.1039/D2EW00723A	228
	Abhijit Dey, Premdeep Singh Rathee, Mohammad Mohsin Khan	Computational Fluid Dynamics Approach for Frictional Heat Flow Analysis During Friction Stir Welding Process	2023	https://doi.org/10.1007/s13369-022-07215-4	229
	Amit Kumar Dey Abhijit Dey	Use of electrochemical technique for the removal of lead and nickel from modelled aqueous solution, 12 (8).	2023	doi: 10.48047/ecb/2023.12.8.74	230
	Mohammad Mohsin Khan, Abhijit Dey	Microstructure-abrasive wear correlation of in situ ZA27/TiC composites, 48 (16), 22928-22942	2022	https://doi.org/10.1016/j.ceramint.2022.04.250	231
	G Chaudhary, A Dey, AK Dey	Stress and Delamination Analysis on Overlapped-Grouped and Overlapped-Dispersed Tapered Composite Laminate, 58 (5), 612-623.	2022	https://doi.org/10.1007/s10778-023-01185-2	232
	Mohammad Mohsin Khan, Abhijit Dey	Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiCp MMCs	2022	https://doi.org/10.1016/j.matchemphys.2021.125319	233
	Basant Lal, Abhijit Dey, Mohamamd Farooq Wani	Prediction of Surface Roughness During Dry Sliding Wear: Characteristics of Ti-6Al-4V Alloys, 10(1), 12.	2022	DOI: 10.4018/IJSEIMS.2022010104	234
	RUMI GOSWAMI, AMIT KUMAR DEY, ABHIJIT DEY	POSITIVE IMPACT ON ENVIRONMENT DUE TO COVID-19 LOCKDOWNS IN PARTS OF INDIA: A REVIEW	2022	DOI:10.30638/eemj.2022.052	235
	Amit Kumar Dey, Abhijit Dey, Rumi Goswami	Fixed-bed column analysis for adsorption of Acid scarlet 3R dye from aqueous solution onto chemically modified betel nut husk fibre	2022	doi: 10.5004/dwt.2022.28253	236
	RUMI GOSWAMI AMIT KUMAR DEY AND ABHIJIT DEY	COMPARATIVE ANALYSIS ON AIR AND WATER QUALITY IN PARTS OF INDIA: BEFORE AND DURING LOCKDOWN DUE TO COVID -19, 1492-1501.	2022		237
	Basant Lal, Abhijit Dey, MF Wani	Effect of Frictional Heating on Mechanically Mixed Layers during Dry Sliding Contact of Ti-6Al-4V Alloys at High Temperature in Vacuum Condition, 29 (10), 2250127	2022	https://doi.org/10.1142/S0218625X2250127X	238
	B Lal, A Dey, MF Wani	INFLUENCE OF TEMPERATURE AND APPLIED LOAD ON ADHESION AND ABRASION WEAR CHARACTERISTICS OF TI6AL4V ALLOY, 10 (1),11.	2022	DOI: 10.4018/IJSEIMS.302234	239
	Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, Bibhuti Bhushan Biswal	Processing of hardened steel by MQL technique using nano cutting fluids,2021/2/17,Materials and Manufacturing Processes,316-328,36.	2021-2-17	doi.org/10.1080/10426914.2020.1832688	240
	Abhijit Dey, Mrinal Shrivastav, Pawan Kumar	Optimum performance evaluation during machining of Al6061/cenosphere AMCs using TOPSIS and VIKOR based multi-criteria approach, 2174-2188	2021	https://doi.org/10.1177/0954405420958770	241
	Abhijit Dey, Krishna Murari Pandey, Ram Naresh Rai, Akhtar Khan, Anshuman Das	APPLICATION POTENTIAL OF RESPONSE SURFACE METHOD ON ELECTRO DISCHARGE MACHINING OF AA6061–CENOSPHERE AMCs PREPARED BY COMPOCASTING METHOD, 2150056	2021	https://doi.org/10.1142/S0218625X21500566	242
	Mohammad Mohsin Khan, Abhijit Dey, Mohammad Irfan Hajam	Experimental Investigation and Optimization of Dry Sliding Wear Test Parameters of Aluminum Based composite, 14, 4009-4026.	2021	https://doi.org/10.1007/s12633-021-01158-5	243
	Abhijit Dey, Mohammad Mohsin Khan	MCD Approach for Assessing the Optimal Operating Condition during Sliding Wear Characteristics of LM25/SiC AMCs Processed by an Improved Stir Casting Technique, 14, 3673-3691.	2021	https://doi.org/10.1007/s12633-021-01123-2	244
	Mohammad Mohsin Khan, Abhijit Dey	Selection of optimal processing condition during abrasive Wear of in-situ ZA-37/TiCp composites using MCDM technique, 47,20090-20107	2021	https://doi.org/10.1016/j.ceramint.2021.04.016	245
	Anshuman Das, Saroj Kumar Patel, Manoranjan Arakha, Abhijit Dey, Bibhuti Bhushan Biswal	Processing of hardened steel by MQL technique using nano cutting fluids, 36, 316-328.	2021	https://doi.org/10.1080/10426914.2020.1832688	246

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Manoj Kumar	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Possible utilization of waste tyre as a potential energy source: A short review”, Journal of Biofuels, Vol. 12, pp. 1-9	March, 2021	http://dx.doi.org/10.5958/0976-4763.2021.00003.9	247
	Ravi Kant Ravi, Mukesh Kumar, Manoj Kumar, and R.P. Saini	Experimental investigation on heat transfer and fluid flow characteristics for roughened counter flow solar air collector”, International Journal of Green Energy (Taylor & Francis), vol.19(8), pp. 865-878	September, 2021	https://doi.org/10.1080/15435075.2021.1969938	248
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Application of pyrolysis and hydrothermal liquefaction process to convert biofuel from biomass” Journal of Physics: conference series	November, 2021	doi:10.1088/1742-6596/2062/1/012029	249
	Manoj Kumar, Neeraj Mehla, Shobhit Srivastava and Ravi Kant Ravi	Water generation from atmospheric air by using desiccant materials- nature-based solution- a review”, World Journal of Engineering, vol. 20(5), pp. 956-973	May 2022	https://doi.org/10.1108/WJE-07-2021-0420	250
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effect of injection timing of waste plastic oil and its blend on CRDI diesel engine”, International Journal of Engine Research,	September, 2022	https://doi.org/10.1177/14680874221119131	251
	Chandan Swaroop Meena, Amit Nandan Prajapati, Ashwani Kumar and Manoj Kumar	Utilization of solar energy for water heating application to improve building energy efficiency: An Experimental Study”, Buildings (MDPI), vol. 12(12), pp. 2166	December, 2022	https://doi.org/10.3390/buildings12122166	252
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	A comprehensive review on the production of alternative fuel through medical plastic waste”, Journal of Sustainable Technologies and Assessments, Vol.55 pp.102924	February 2023	https://doi.org/10.1016/j.seta.2022.102924	253
	Amit Kumar, Harveer Singh Pali, and Manoj Kumar	Effective utilization of waste plastic derived fuel in CI engine using multi objective optimization through RSM, FuelO, Volume 355.	1 January 2024	10.1016/j.fuel.2023.129448	254

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Sandeep Rathee	Manu Srivastava, Sandeep Rathee, Vivek Patel, Atul Kumar, Praveennath G Koppad	A review of various materials for additive manufacturing: Recent trends and processing issues	2022	https://doi.org/10.1016/j.jmrt.2022.10.015	255
	Manu Srivastava, Sandeep Rathee, Ankit Tiwari, Mehul Dongre	Wire arc additive manufacturing of metals: A review on processes, materials and their behaviour	2023	https://doi.org/10.1016/j.matchemphys.2022.126988	256
	Ashish Yadav, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Investigation of bead morphology and mechanical behaviour for metal inert gas welding-based WAAM in pulsed mode metal transfer on 316LSi stainless steel	2023	https://doi.org/10.1080/01694243.2023.2241642	257
	Ashish Yadav, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Functionally graded deposition of dissimilar steel (316LSi and ER70S-6) fabricated through twin-wire arc additive manufacturing	2024	https://doi.org/10.1016/j.matlet.2023.135395	258
	Shazman Nabi, Sandeep Rathee, Manu Srivastava	Friction and wear analysis of Al-5052/NiTi surface composites fabricated via friction stir processing	2024	https://doi.org/10.1016/j.triboint.2023.109179	259
	Shazman Nabi, Sandeep Rathee, MF Wani, Manu Srivastava	Effect of multiple passes on the properties of Al-5052/SiC surface composites fabricated via friction stir processing	2024	https://doi.org/10.1016/j.matchemphys.2023.128819	260
	Manu Srivastava, Nasir Khan, Shazman Nabi, Sandeep Rathee	Microstructure and Mechanical Properties of Friction Stir Welded Al–Mg–Si Alloys Under Variable Parameter Conditions	2023	http://doi.org/10.1007/s40033-023-00511-9	261
	Shazman Nabi, Sandeep Rathee, MF Wani, Manu Srivastava	Al-5052/SiC + CeO2 hybrid surface composites: Achieving improved microstructural and mechanical behaviour via friction stir processing	2024	https://doi.org/10.1016/j.matlet.2024.136048	262
	Pushkal Badoniya, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Parametric investigation on wire arc additive manufacturing of ER70S-6 low-carbon steel for fabrication of thick-walled parts	2023	https://doi.org/10.1080/01694243.2023.2275823	263
	Farooz Ahmad Najar, Sandeep Rathee, Manu Srivastava, Ashish Yadav	Tribological and Corrosion Behaviour of Al-Mg-CeO2 metal matrix surface composite	2024	https://doi.org/10.1016/j.triboint.2024.109508	264
	Ashish Yadav, Manu Srivastava, Prashant K Jain, Sandeep Rathee	Microstructure transformations and improving wear resistance of austenitic stainless steel additively fabricated by arc-based DED process	2024	https://doi.org/10.1016/j.dt.2024.02.006	265
	Sandeep Rathee, M Srivastava “Book Titled Wire Arc Additive Manufacturing: Fundamental Science and Advancements 2023 CRC Press, Taylor & Francis Group”
	S.Nabi, M.F wani, Sandeep Rathee, M Srivastava,	Wire Arc Additive Manufacturing through GMAW Route	2023	Book Chapter	266
	B Kumar, SA Nazir, Sandeep Rathee, M Srivastava,	Wire Arc Additive Manufacturing of Non-ferrous Alloys	2023	Book Chapter	267
	Book Titled “Friction Stir Welding and Processing: Fundamentals to Advancements Sandeep Rathee, M Srivastava, J P Davim” publisher Wiley 2023
	F Najar, Sandeep Rathee, M Srivastava, S.Nabi	Friction Stir Welding: An Overview, in the book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter	268
	A Kumar, D Flouria M Srivastava, Sandeep Rathee,	Fundamentals of Friction Stir Processing, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter
	Sandeep Rathee ,M Srivastava, S Nabi, A Kumar	Sample Preparation and Microstructural Characterization of Friction Stir Processed Surface Composites, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter
	A Yadav, Abhignya, M Srivastava, Sandeep Rathee ,	Analysis of Friction Stir Welding Tool Using Various Threaded Pin Profiles: A Case Study, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements”	2023	Book Chapter
	A Yadav, Abhignya, M Srivastava, Sandeep Rathee ,	Static Structural and Thermal Analysis of Honeycomb Structure Fabricated by Friction Stir Process Route: A Case Study, in book titled “Friction Stir Welding and Processing: Fundamentals to Advancements	2023	Book Chapter

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr.Dinesh Kumar R	Jeyaprakash N, Yang C-H, Karuppasamy SS, Rajendran DK	Correlation of microstructural with corrosion behaviour of Ti-6Al-4V specimens developed through selective laser melting technique. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2022;236(5):2240-2251	2022	doi:10.1177/09544089221087823	269
	A Karpagarak Dinesh kumar Rajendran	Effect of GTAW process parameters on joining stainless steel 316L	2022	https://doi.org/10.1063/5.0095789	270
	Rajagopal, V., Rajendran, D. & Muthukumaran, S.	Parametric, Mechanical and Metallurgical Characterization of Dissimilar Friction Stir Welded AA2014-AA2219	2024	https://doi.org/10.21203/rs.3.rs-2652119/v1	271
	Sagar M. Baligidad , Syed Abdullah , Dinesh Kumar Rajendran	Investigation on fatigue life of HAp and rGO hybrid coating on the PEEK artificial screws for dental implant	2023,	https://doi.org/10.1016/j.matchemphys.2023.128381	272
	Rajagopal, V., Rajendran, D. & Muthukumaran, S.	Multi-objective optimization and characterization of AA2219-T87 and AA6061-T6 dissimilar friction stir welded joints under the effect of copper backing using AUGMECON. Sadhana 49, 32 (2024).	2024	https://doi.org/10.1007/s12046-023-02360-4	273
	Deepak Kumar Naik, Ved Prakash Sharma, R. Dinesh Kumar	Automation in Welding Industries	2024	https://doi.org/10.1002/9781394172948.ch3	274

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Azhar Jameel	V. Gupta, Azher Jameel, S. K. Verma, S. Anand, Y. Anand	An insight on NURBS based Isogeometric Analysis, its current status and involvement in Mechanical Applications” Archives of Computational Methods in Engineering (Springer), vol. 30, pp. 1187-1230, 2023.	2023	https://doi.org/10.1007/s11831-022-09838-0	275
	A. S. Lone, Azher Jameel, G. A. Harmain	Enriched Element Free Galerkin Method for Solving Frictional Contact between Solid Bodies”, Mechanics of Advanced Materials and Structures (Taylor and Francis), Vol. 30, pp. 4227-4245, 2023.	2023	https://doi.org/10.1080/15376494.2022.2092791	276
	A. S. Lone, Azher Jameel, G. A. Harmain	Modelling of Contact Interfaces by Penalty Based Enriched Finite Element Method”, Mechanics of Advanced Materials and Structures (Taylor and Francis), Vol. 30, pp. 1485–1503, 2023	2023	10.1080/15376494.2022.2034075	277
	S. A. Kanth, A. S. Lone, Azher Jameel, G. A. Harmain	Estimation of crack tip plastic zones in presence of material irregularities by extended finite element method”, Journal of the Brazilian Society of Mechanical Sciences and Engineering (Springer), Vol. 45, pp. 340, 2023.	2023	https://doi.org/10.1007/s40430-023-04235-5	278
	A. S. Lone, S. A. Kanth, G. A. Harmain, Azher Jameel	Modelling of large sliding between contacting bodies by penalty based element free Galerkin method using node-to-segment approach”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (Springer), Vol. 01, pp. 1-18, 2023.	2023	https://doi.org/10.1007/s40997-023-00605-5	279
	S. A. Kanth, G. A. Harmain, Azher Jameel	Assessment of Fatigue Life in Presence of Different Hole Geometries by X-FEM”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (Springer), Vol. 47, pp. 1145-1159, 2023.	2023	https://doi.org/10.1007/s40997-022-00569-y	280

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr.Deepak Kumar Naik	Himadri Majumder, Akhtar Khan, Deepak Kumar Naik, Ch Sateesh Kumar	Machinability Assessment Of Shape Memory Alloy Nitinol During Wedm Operation: Application Potential Of Taguchi Based Ahp–Dfa Technique	2022	https://doi.org/10.1142/S0218625X22500020	281
Dr.Deepak Kumar Naik	Deepak Kumar Naik, Ved Prakash Sharma, R. Dinesh Kumar	Automation in Welding Industries	2024	https://doi.org/10.1002/9781394172948.ch3	282

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Ved Prakash Sharma	Ved Prakash Sharma, Naresh Varma Datla	Fracture Behavior and Reliability of Low-Silver Lead-Free Solder Joints, Journal of Electronic Packaging, ASME, https://doi.org/10.1115/1.4054096, MAR, 2022	2022	https://doi.org/10.1115/1.4054096	283
	Ved Prakash Sharma, Naresh Varma Datla	Effect of aging time and loading rate on fracture behavior of Cu/Sn-0.7Cu solder joints, Microelectronics Reliability, Elsevier, https://doi.org/10.1016/j.microrel.2021.114381, SEP, 2021	2021	https://doi.org/10.1016/j.microrel.2021.114381	284
	Ved Prakash Sharma, Naresh Varma Datla	Effect of bond-line thickness and mode-mixity on the fracture behavior and traction separation law of Sn-0.7Cu solder joints, Engineering Failure Analysis, Elsevier, https://doi.org/10.1016/j.engfailanal.2021.105855, JAN, 2022	2022	https://doi.org/10.1016/j.engfailanal.2021.105855	285
	Ved Prakash Sharma, Manoj kumar, Avadhesh Yadav, Ravi Kant Ravi, Venkateswara R. Kode	"Atmospheric Water Generation with Different Grades of Molecular Sieve" for the book titled "Highly Efficient Thermal Renewable Energy Systems: Design, Optimization, and Applications" published by Routledge (Taylor and Francis Group).	2023	Book Chapter
	Ved Prakash Sharma, Deepak Kumar, Dinesh Rajendran	"Automation in Welding Industries" for the book titled "Automation in Welding Industry: Incorporating Artificial Intelligence, Machine Learning and Other Technologies" published by Scrivener Publishing LLC (Wiley).	2024	https://doi.org/10.1002/9781394172948.ch3	286

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. Mukund Dutt Sharma	S Kumar, R Sehgal, MF Wani, M.D sharma	Friction and wear properties of core-shell (CI is a core & GO is a shell) particles based magnetorheological fluid under steel on steel point contacts	2023	https://doi.org/10.1016/j.jiec.2022.11.028	287
	Sheikh Haris Mukhtar, MF Wani, M.D sharma, Rakesh Sehgal	Nano-mechanical and nano-tribological characterisation of self-lubricating MoS2 nano-structured coating for space applications	2023	https://doi.org/10.1016/j.triboint.2022.108017	288
	Rakesh Sehgal, Neeraj Gupta, Anuradha Tomar, Vigna Kumaran, M.D sharma	Smart Electrical and Mechanical Systems: An Application of Artificial Intelligence and Machine Learning	2022	Academic Press	289
	Sanjay Kumar, Rakesh Sehgal, MF Wani, M.D sharma	Stabilization and tribological properties of magnetorheological (MR) fluids: A review	2021	https://doi.org/10.1016/j.jmmm.2021.168295	290
	A Awasthi, N Panwar, M Pant, S Bala, A Chauhan, M.D sharma	Characterization, Fabrication and Dry Sliding Wear Analysis of Hybrid Aluminium 6061 Composite	2021	10.24874/ti.1012.11.20.03	291
	Sanjay Kumar, Rakesh Sehgal, MF Wani, M.D sharma	Magnetorheological study of core− shell structured carbonyl iron/2-D graphene oxide microparticles suspensions with improved sedimentation stability	2023	https://doi.org/10.1016/j.jmmm.2023.170852	292
	Tahir Ahmad Dar, Sanjay Kumar, Rakesh Sehgal, M.F. Wani, M.D sharma, Umida Ziyamukhamedova	Next-generation ecofriendly MR fluid: Hybrid GO/ Fe2O3 encapsulated carbonyl iron microparticles with improved magnetorheological, tribological, and corrosion resistance properties	2023	https://doi.org/10.1016/j.carbon.2023.118331	293
	Safoora Shabir, M.D sharma	Surface Modification of Ti3Al2.5V Titanium Alloy Using Laser Texturing With Improved Wettability, Corrosion and Bioactivity Behaviour	2024	10.1007/s12666-023-03203-w	294
	Sanjay Kumar, Bharat Kumar, Rishabh Sehgal, MF Wani, et al.	Advantages and Disadvantages of Metal Nanoparticles	2023	Book Chapter	295

Name of the faculty	Names of all authors and co-authors	Title of paper, journal name, volume no./Issue no., page nos.	Date of publication	DOI	Page No.
Dr. M. Mohsin Khan	M. Abas, B., Iqbal, S., Bukhari, S., Villivalam, S., & Khan	A Retrospective of Workplace Deviance in Hospitality: A Two-tier Literature Review	2024	https://doi.org/10.1177/09722629231220990	296
	Rajesh Gangakhedkar, Mohsin Khan, M Karthik	Understanding carpooling intentions of Generation Z of India: a structural equation modeling approach	2023	https://doi.org/10.1080/03081060.2023.2294342	297
	Mohsin Khan, Rajeesh Viswanathan	Effectiveness of online teaching and learning in Indian universities during the COVID-19 pandemic	2023	https://doi.org/10.1108/IJEM-09-2020-0441	298
	M. Khan, M. and Goli	Online learning: predicting student engagement and continued intention	2023	https://doi.org/10.1504/IJLT.2023.135904	299
	Mohsin Khan, Rampalli Prabhakara Raya, Rajeesh Viswanathan	Enhancing employee innovativeness and job performance through a culture of workplace innovation	2022	https://doi.org/10.1108/IJPPM-09-2020-0466	300
	Mahendar Goli, Mohsin Khan	Behavioural intention to use social networking mobile apps: the case of TikTok	2022	https://doi.org/10.1504/IJBIR.2022.125667	301
	Mohsin Khan, Abhijit dey	Hybrid MCDM approach for examining the high-stress abrasive wear behaviour of in situ ZA-27/TiC MMCs	2022	https://doi.org/10.1016/j.matchemphys.2021.125319	302
	Mohsin Khan, Abhijit dey	Microstructure-abrasive wear correlation of in situ ZA27/TiC composites, 48 (16), 22928-22942	2022	https://doi.org/10.1016/j.ceramint.2022.04.250	303

News & Announcement

Midterm updates Session spring 2024

Notice for backlog registration

Academic Calender 2024

Mentor List

Classes will be held this Saturday, April 13th, following the schedule for Monday, April 15th.

Mechanical Engineering National Institute of Technology Srinagar

About Dept.

News & Announcement

Quick Links