babar@nitsri.ac.in
-
Srinagar

Prof.BABAR AHMAD

Professor

Haptics and Control Systems, Robotics, MEMS Modeling and Simulation, Fuel Cells

Education

Degree Institute CGPA Year Subject Description
Ph. D. 2012 Micro Electro Mechanical Systems Design and Development of Capacitive Micromachined Ultrasonic Transducers
M.E. 1999 Mechanical Engineering Vibroacoustic Analysis of Thick-Walled, Free, Finite-length Cylinders

Publications Journal

Month-Year Authors Paper Title Volume PageNo DOI Impact Factor Type Journal Name
AUG 2021 Time-delayed dual-rate haptic rendering: stability analysis and reduced order modeling, International Journal of Intelligent Robotics and Applications, https://doi.org/10.1007/s41315-021-00205-z
MAR 2020 Fabrication and characterization of poly (vinyl alcohol)–graphene nanoplatelets (GNPs) proton exchange membrane for direct methanol fuel cells. Materials Today: Proceedings
AUG 2019 Preparation and characterization of a novel nano-size titanium oxide-PVA (TiO2-PVA) composite ion exchange membrane IOP Conf. Series: Journal of Physics: Conf. Series 1240 (2019) 012130
JUL 2019 Friction and wear performance evaluation of UHMWPE using Taguchi based grey approach: A study on the influence of load and bio-serum lubrication, Materials Chemistry and Physics 239 (2020) 121918 https://doi.org/10.1016/j.matchemphys.2019.121918
JAN 2019 Implant materials for knee and hip joint replacement: A review from the tribological perspective, IOP Conf. Series: Materials Science and Engineering 561 (2019) 012007 doi:10.1088/1757-899X/561/1/012007
JUL 2019 Stability Analysis of Dual-rate Haptics Controller Using Two Control Architectures, IOP Conf. Series: Journal of Physics: Conf. Series 1240 (2019) 012145 doi:10.1088/1742-6596/1240/1/012145
JUL 2019 Experimental Evaluation of High Temperature Corrosion Performance of 75Ni25Cr Coated and Bare 347H SS in Air and Simulated Husk Fired Boiler Environment Journal of Physics: Conference Series 1240 (1), 012129
OCT 2018 Preparation and Characterization of Nano-size Gamma Alumina and PVA Composite Membranes Journal of Material Science and Mechanical Engineering (JMSME) p-ISSN: 2393-9095; e-ISSN: 2393-9109; Volume 5, Issue 4; October-December, 2018, pp. 164-167
OCT 2011 Analytical evaluation of squeeze film forces in a CMUT with a sealed air-filled cavity. IEEE Sensors Journal, vol. 11, no. 10, pp.2426-2431, October 2011
NOV 2010 Elasto-electrostatic analysis of circular microplates used in capacitive micromachined ultrasonic transducers, IEEE Sensors Journal vol. 10, no. 11, pp. 1767-1773, November 2010
JUN 2010 The effect of evacuated backside cavity on the dynamic characteristics of a capacitive micromachined ultrasonic transducer, International Journal of Advances in Engineering Science and Applied Mathematics, vol. 2, pp. 50-54, Jan-June 2010.
JUN 2008 Fabricating Capacitive Micromachined Ultrasonic Transducers with Wafer Bonding Technique, Sensors & Transducers Journal, Vol. 93, Issue 6, pp 15-20, June 2008.

Publications Conference

Month-year Authors Type Identifier Title Conference Name
JUL 2021 A composite polymer exchange membrane based on Poly (vinylidene fluoride) PVDF ANM2021 Conference, Session of Hydrogen Energy, University of Aveiro, Portugal, 22-24 July, 2021.
DEC 2020 Recent advances in machining of composites and superalloys by using wire-EDM: A Review First International Conference on Future Technologies in Manufacturing, Automation, Design and Energy, 28 - 30 December 2020
JUL 2019 Poly (vinyl alcohol)-based Zinc Oxide (PVA-ZnO) Composite Proton Exchange Membrane for DMFC ANM2019 Conference, Session of Hydrogen Energy, University of Aveiro, Portugal, 17-19 July, 2019.
DEC 2017 Influence of concentration and temperature on transport properties in Cation-exchange membrane Proceedings of the International Conference on Sustainable Energy and Environmental Challenges (SEEC-2018) 31 December, 2017 – 03 January, 2018, IISc, India
NOV 2007 Fabrication of a Capacitive micromachined ultrasonic transducers with wafer bonding technique. ISSS-MEMS, CEERI, Pilani, 16-17 November, 2007
OCT 2007 Static and dynamic analysis of a capacitive micromachined ultrasonic transducer Conference on Applications and Design in Mechanical Engineering, Kangar, Perlis, Malaysia
JUL 2005 A Novel Flow-Path for Disposal of Hospital Waste at SKIMS, Srinagar National Seminar on Sustainable Technologies in Civil and Mechanical Engineering, STCM-2005
JUN 2005 Development of Framework for Operational Strategy Evaluation in a Production System CONCOURSE 2005, National Conference on Industrial Automation: Emerging Trends

Book Published

  • Stability Analysis of a Dual-Rate Haptics Controller Using Discrete-Time Root-Locus Method, Chapter in Machines, Mechanism and Robotics, Lecture Notes in Mechanical Engineering, Springer, Singapore. ISBN 978-981-16-0549-9, ISBN 978-981-16-0550-5 (eBook), https://doi.org/10.1007/978-981-16-0550-5_83 , 2021

Any Other Professional or Extra-curricular Achievements

Type Achievement Date Desciption
Extra-Curricular abc